TCL HH132V1 Manuel utilisateur
USER MANUAL
V1.0 | HH132V1/HH132VM
2
Contents
Chapter 1. Meet your CPE............................................................................... 4
1.1 System requirements ................................................................................ 4
1.2 Overview ................................................................................................... 4
Chapter 2. Get started with your CPE ........................................................... 6
2.1 Insert a nano SIM card.............................................................................. 6
2.2 Access CPE network................................................................................. 7
2.3 Use the telephone function (optional)........................................................ 8
Chapter 3. Access the web UI ........................................................................ 9
3.1 Log in to the web UI ................................................................................. 9
3.2 Explore web UI features............................................................................ 9
Chapter 4. Configure your CPE.................................................................... 11
4.1 Home....................................................................................................... 11
4.2 Status ..................................................................................................... 11
4.3 Services................................................................................................... 12
4.4 Settings ................................................................................................... 13
4.5 System .................................................................................................... 18
Important safety information......................................................................... 19
Troubleshooting ............................................................................................. 21
3
Read this first
•Before using this documentation and the device it supports, ensure you read and
understand the "Important safety information" on page 19.
•Illustrations in this documentation might look different from your device.
•Instructions in this documentation may vary depending on your device model and
software version.
•Some apps and features are not available in all countries or regions. App and feature
availability is subject to change.
•Documentation content is subject to change without notice. We make constant
improvements on the documentation of your device, including this user manual.
•TCL Communication Ltd. does not assume any liability that may occur due to the use or
application of the product described herein. Every effort has been made in the preparation
of this documentation to ensure accuracy of the contents, but all statements, information
and recommendations in this documentation do not constitute the warranty of any kind,
express or implied.
4
Chapter 1. Meet your CPE
The Cat13 LTE CPE is a dual-band WiFi device. It operates at both 2.4 GHz and 5 GHz, and
provides wired and wireless access for multiple computers and mobile devices. With various
features and functions, the Cat13 LTE CPE is a perfect hub of your home or business
network.
1.1 System requirements
Your CPE is compatible with Wi-Fi-enabled devices which support 2.4 GHz (802.11 b/g/n)
or 5 GHz (802.11 a/ac/ax), and works with these browsers, including Firefox, Safari, Internet
Explorer (11.0 or later), Opera, and Google Chrome.
1.2 Overview
1 2 3 4 5
6 7
8
9
10 11 12 13
1. Power indicator •On: The device is powered on.
•Off: The device is powered off.
2. Network indicator
•Blinking green: The device is registered to 3G network.
•Blinking blue: The device is registered to 4G network.
•Solid green: The device is connected to 3G network.
•Solid blue: The device is connected to 4G network.
•Solid red: Nano SIM card is not available or the device is not
registered to the network.
3. Wi-Fi/WPS
indicator
•Blinking blue: WPS connection is available.
•Solid blue: Wi-Fi is enabled.
•Off: WiFi is disabled.
4. LAN/WAN
indicator
•On: the WAN or LAN port is connected.
•Off: the WAN or LAN port is not connected.
5
5. Signal indicator
•1 bar: weak signal strength.
•2 bars: good signal strength.
•3 bars: excellent signal strength.
•Off: no signal.
6. Reset button Use a paperclip to press the button for 3 seconds to reset the
device.
7. Nano SIM card
slot Insert a Nano SIM card in the slot.
8. WPS button
Press the button for 3 seconds to enable the WPS function. The
WPS function will be automatically disabled if a WPS connection is
not established within 2 minutes.
9. Power button •Press for 3 seconds to power off your device.
•Press for 1 second to power on your device.
10. Telephone port
(Optional) Connect to a telephone to make or answer calls.
11. LAN/WAN port Used to connect to an internet source or wired devices such as
computers or switches.
12. LAN port Used to connect to wired devices such as computers or switches.
13. Power connector Used to connect to the power adapter.
When the CPE downloads and installs software updates, you will see the
indicators flash on and off in a sequence. Do not power off your CPE during this
process, otherwise it may cause device malfunction.
6
Chapter 2. Get started with your CPE
This chapter introduces the basic instructions on how to set up your CPE and make
connections. The instructions may vary depending on your CPE model.
2.1 Insert a nano SIM card
Prerequisite: Select the right size of SIM card for your CPE.
Mini-SIM (2FF) Nano-SIM (4FF)
Micro-SIM (3FF)
Locate the nano SIM card slot, and insert a nano SIM card as illustrated below. Close the
nano SIM card slot cover after inserting the card.
Nano SIM
1
2
•Note the orientation of the Nano SIM card. If the Nano SIM card is inserted
incorrectly, it may get jammed.
•Do not remove the Nano SIM card when your CPE is in use. Otherwise, it may
cause malfunction to your CPE or data loss of your SIM card.
7
2.2 Access CPE network
You can connect your devices to the CPE network wiredly or wirelessly as illustrated below.
Access wired network
To establish a wired network connection, connect the wired device to the LAN port of your
CPE using an Ethernet cable.
Access wireless network
To establish a wireless network connection, select the Wi-Fi name (or the SSID) of the CPE
on your wireless devices, and enter the Wi-Fi password.
Note: The default Wi-Fi name and password can be found on the bottom label of your CPE.
If your wireless device is WPS-enabled, you can also access the CPE Wi-Fi network through
a WPS connection.
1) Press the WPS button on your CPE for 3 seconds. The WPS function will be enabled
within 2 minutes.
2) Enable the WPS function of your wireless device to make a WPS connection.
8
2.3 Use the telephone function (optional)
Your CPE supports the telephone function. Connect a telephone to your CPE using a
telephone cable as illustrated below.
9
Chapter 3. Access the web UI
This chapter introduces how to get access to the web UI of your CPE, and gives you a
glimpse of the web UI.
3.1 Log in to the web UI
To log in to the web UI, follow these steps:
1. Open a web browser on the device connected to the CPE network wiredly or wirelessly.
2. Go to the login website which can be found on the bottom label of your CPE and follow
the on-screen instructions to finish the login process.
Note: For the default login information, refer to the bottom label of your CPE.
NOTES
•Click Language at the upper right of the screen to change the language setting.
•Click Help at the upper right of the screen to access user manual.
3.2 Explore web UI features
Home page features
The web UI is mainly comprised of the following sections: Home, Status, Services, Settings,
and System. Click on each section to display more information about your CPE.
Commonly-used status icons are displayed in the web UI, which give you information about
your CPE.
or / It is the network your CPE connects to. No Service will be displayed
when there is no network available.
The number of the signal bar indicates the signal strength. The more
signal bars it shows, the stronger the signal is.
VoLTE is enabled.
VoLTE is disabled.
The CPE connects to WAN network.
The CPE disconnects from WAN network.
New messages or unread messages.
The SMS inbox is full.
10
Wi-Fi is enabled.
Wi-Fi is disabled.
Click to log out of the web UI.
NOTE
•VoLTE function will be disabled if there is no telephone port on your device.
Autres manuels pour HH132V1
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels TCL Routeur sans fil
TCL
TCL LinkZone Manuel utilisateur
TCL
TCL LinkHub Manuel utilisateur
TCL
TCL ODU12DE Manuel utilisateur
TCL
TCL MW63 Manuel utilisateur
TCL
TCL LINKZONE MW42L Manuel utilisateur
TCL
TCL LinkZone Manuel utilisateur
TCL
TCL Verizon LINKZONE 5G UW Manuel utilisateur
TCL
TCL HH500V Manuel utilisateur
TCL
TCL MS1G Manuel utilisateur
TCL
TCL HH63AF Manuel utilisateur
