TERMINAL BOARD CONNECTIONS
1 + 2 (Power supply)
3 + 4 (Flashing light) -
7 + 10 (Open/Close)
8 + 10 (Stop)
9 + 10 (Photocell)
IN SERIES
11 + 12 (Photocell - 24 V AC)
13 + 14 (Antenna)
M2
(CLS)(OLS)(COM);
FS1 + FS2
M3 (M-COM);
(M-CL)(M-OP)
LOGIC ADJUSTMENTS
FR. Turning the trimmer clockwise (+) the torque will be increased; Turning the trimmer counterclockwise (-) the torque
will be decreased.
SENS. Turning the trimmer clockwise (+) the sensitivity will be increased; Turning the trimmer counterclockwise (-) the
sensitivity will be decreased.
T.C.A. Turning the trimmer clockwise (+) time will be increased; Turning the trimmer counterclockwise (-) the time
will be decreased.
Note: The time values can be set between 1 and 120 seconds.
Dip switch
1 on:
2 on:
3on:
4 on:
K100M FEATURES
Contact Technical Service;
Make sure the gate slides smoothly and without obstacles in both directions;
Perform learning procedure.
Check wiring - Make sure the motor can rotate freely;
ADVANCED FUNCTIONS
Clock function:
433.92 MHz BUILT-IN RADIO RECEIVER
st
nd
-
risation.
be cancelled.
TROUBLESHOOTING GUIDE
1- Operator does not run
c-
2- The radio control has little range
3- The gate opens the wrong way
