Taser AXON body Manuel utilisateur

Step 2:

Camera Operation LED

The AXON body camera’s operation LED displays the system’s current operating

mode.

Operating Mode Operation LED

Recording Blinking red

Buering Blinking green

Booting up/powering down Solid red

Step 3:

Battery LED

The camera’s battery LED displays the battery’s remaining capacity, when the device

is being used or when charging.

Battery Status Battery LED

Battery capacity is 41–100% Green

Battery capacity is 20–40% Yellow

Battery capacity is less than 20% Red during operation; ashing red and

yellow during charging

Battery critically low Blinking red and yellow

TASER AXON body Quick Start Guide

English (U.S./Canada/Australia/U.K.)

Hardware

AXON body USB Cable

AXON body Camera

AXON body Wall Charger

Quick Reference

Audio quality will be reduced if the camera is not in the holster.

Bluetooth Pairing and Upload

Status LED

Bottom View

Volume/Pairing

Battery Status Button

Push to Show Status of

Battery

Camera Lens

Speaker

Battery LED

Green = 41% - 100%

Yellow = 20% - 40%

Red = Less Than 20%

Microphone

Power Switch

Red = On/Buffering

Event Button

Double Tap = Start Record

Hold 3 Sec = Stop Record

Recharging/Dataport

Data Transfer & Recharging

through PC or EVIDENCE.com

Dock

Top View

Operation LED

Step 1:

Recording

The AXON body camera has two operating modes. The default mode, or BUFFERING

mode, provides pre-event buering to capture activities that occur before you

activate the EVENT (recording) mode.

1Turn the system on. Move the ON/OFF switch to the ON position.

Solid Red

Boot Up Mode

Blinking Green

Buering Mode

• The camera takes a few seconds to boot up and be ready to record (the red area

under the switch will be exposed with the switch moved to the ON position).

• The operation LED will be solid red and then transition to blinking green

when the system goes into BUFFERING mode.

• The AXON body camera will go into BUFFERING mode after the boot up

sequence. The BUFFERING mode holds the previous 30 seconds of video

[NO AUDIO] leading up to the beginning of a recording.

2To record, quickly double-press the EVENT button.

• The camera now records audio as well as video.

• The camera will beep twice to let you know that recording has started. The

2 beeps will repeat every 2 minutes (if the system is muted, there will be

no audio notications).

• The operation LED will blink red.

Event Button Blinking Red - Record Mode

3To stop recording and return to BUFFERING mode, press and hold the EVENT

button for at least 3 seconds until there is a long, audible beep.

Because the system does not capture audio in BUFFERING mode, the rst 30

seconds of a recorded event will be video-only (depending on your agency’s

settings). BUFFERING mode starts only after the camera is turned on. The system

does not record when the AXON body camera is turned o.

Step 6:

AXON body EVIDENCE.com Dock Upload Status LED

When you plug your camera into the EVIDENCE.com Dock, the upload status LED on the bottom of the camera displays the system’s status

System Status LED Indication

Initial connection (momentary) Solid red (for 20 seconds or fewer)

In queue awaiting upload Solid yellow

Uploading data Blinking yellow – DO NOT remove the camera from the EVIDENCE.com Dock

Device ready (all videos uploaded successfully) Solid green

Device not assigned, agency mismatch, camera set in the oine mode, or device error Blinking red

EVIDENCE.com Dock has no communication with the camera LED o

Firmware update, internal battery charging, extremely low battery, or memory full Blinking red and yellow – DO NOT remove the camera from the EVIDENCE.com Dock

Network error Blinking red, yellow, and then green

Transfer error, device re-trying to transfer Blinking green and yellow

Step 7:

Using AXON Mobile

The AXON Mobile application enables you to replay video and add metadata (GPS,

title, case ID, and category) to your videos using a smart phone or multimedia player.

1Using your smart device, download the AXON Mobile

application from the Google Play store or the iTunes App

Store. Search AXON Mobile.

2On your smart device, open the AXON Mobile application

and follow the onscreen instructions for Bluetooth pairing.

See diagram below (or see Step 8: Pairing an AXON body

camera with a Smart Device).

3To add categories to your videos you will need to sign into

your agency. In the AXON Mobile app go to the Settings

menu, select Agency, enter your email address and select

your agency. You will now be able to add categories to your

AXON body videos. (Must be connected to Internet.)

Note: All data is stored on the AXON body camera. No videos are stored on

your smart device.

Step 8:

Pairing the AXON body Camera with a Smart Device

1While holding down the volume/pairing button, move the ON/OFF switch to

the ON position.

2Wait until you hear 3 beeps. The pairing LED will blink green.

3Release the volume/pairing button.

4Using your smart device’s Bluetooth settings, pair it with the AXON body camera.

5You will hear 3 beeps when the devices are paired. The AXON body camera will

then go into BUFFERING mode.

1. Hold down Pairing/Volume Button 2. Turn on AXON body camera

3. Pairing LED will blink green,

you will hear 3 beeps

Step 4:

Audio Notication

The camera emits beeping sounds called audio prompts to notify you of the system

status. These audio prompts usually occur after you perform an action with the

camera.

Operating Mode Audio Notication

Powering on or o One beep

Recording an event Two beeps (every two minutes)

Press the battery button while the

camera is recording Two beeps

The device is ending an event and

returning to BUFFERING mode One long beep

The battery is at 20% capacity or lower Four quick beeps (every 20 seconds)

Camera memory is full (camera will not

record). Three beeps

Step 5:

Recharging the Battery and Uploading Data

If you do not have an EVIDENCE.com Dock, upload video with a Windows compatible

computer using EVIDENCE Sync: TASER.com/syncdownload.

1Ensure the AXON body camera is o. Insert the

camera into the EVIDENCE.com Dock as shown.

The EVIDENCE.com Dock automatically uploads

data to EVIDENCE.com, deletes videos from the

camera, and charges the camera. (The camera

must be registered to your EVIDENCE.com

account.)

2At the beginning of the next shift, ensure that

your camera (if one has been assigned to you)

displays with a green upload status LED

before removing it from the EVIDENCE.com

Dock.

Bluetooth is a trademark of the Bluetooth SIG, Inc. Google Play is a trademark of Google, Inc. iTunes is a trademark of Apple, Inc. IOS is a trademark of Cisco Systems, Inc. Windows is a

trademark of Microsoft Corporation. TASER is a trademark of TASER International, Inc. registered in AU, CA, the EU, NZ, ZA and the US. ©is a trademark of TASER International, Inc.

registered in AU, the EU and the US. ®is a trademark of TASER International, Inc. registered in AU, CA, the EU, ZA and the US. AXON is a trademark of TASER International, Inc., registered

For more information, see the AXON body Camera User Manual, EVIDENCE.com Dock Quick Start Guide, AXON Mobile for Android Devices User Manual, or AXON Mobile for