Taramp's T 0302 Manuel utilisateur

The installation of this product must be made by a qualified professional.

CAR SOUND MIXER

MULTICOLOR

Index

Term of warranty

Technical assistance

Phones: +55 18 3266-4050 / +55 18 99749-3391

For international support, check on our website:

E-mail: [email protected]

www.taramps.com.br/en/rede-de-assistencias-tecnicas or contact direct the factory support:

•Warranty card is not properly filled or torn;

•Defects caused by accessories, modifications or features attached to the product;

•Costs involving uninstallation, reinstallation of equipment as well as shipment to the factory;

•Damaged products by improper installation, water infiltration, violation by unauthorized individuals;

TARAMPS, located on Abilio Daguano Street 274, Res. Manoel Martins – Alfredo Marcondes, SP - Brazil,

ZIP CODE 19180-000, guarantees this product against any defects on terms of project, making,

assembling, and/or with solidarity, due to project vices which cause it improper or inadequate to its

original use within 12 months from the date of purchase. In case of defect during the warranty period,

TARAMPS responsibility is limited to the repairing or substitution of the device of its own making.

This warranty excludes:

•The product with damage from falling, bumps or nature related problems (flooding, lightning, etc.);

•Cases in which the product is not used in adequate conditions;

•Damage of any kind, due to problems in the product, as well as losses caused by discontinued use of the

product.

•Tamper or torn warranty seal;

04 • Product Overview

• Controls

• Outputs

• Inputs

03 • Presentation

• Important recommendations

06 • Functions

05 • Connections

01 • Term of Warranty

• Technical assistance

• Safety

• Safety requirements

02 • Introduction

09 • Audio eﬀects table

• Connection examples - 2

11 • Installation

12 • Installation

13 • Technical features

• Standby eﬀects table

10• Installation

• On/Oﬀ

• Player control

08 • RGB eﬀects

• Long distance control

• Power and activation

07 • Functions

• Connection examples - 1

Safety requirements

Introduction

Taramps reserves the right to modify the contents of this document at any time without prior notice and

does not have the obligation to apply the changes in units which were previously produced.

- Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect

any wires routed through car's body.

- The installation of this product must be done by a qualified professional.

- Never install the product in places exposed to dust, humidity and water. Pay attention to

install it far from fuel tank, fuel lines, heat sources and other parts of vehicle.

To ensure proper use, please read through this manual before using the car sound mixer. It is

specially important that you know the CAUTIONS contained here.

- Use the correct tools for installing this product.

- This product is for use with 12V batteries. Always check the voltage before installing.

- Be sure to install protection fuse or a circuit braker near to battery. Follow the ampere rating

as indicated here in this manual. Use of improper fuse or circuit breaker could result in

overheat, smoke, damage to product, injury or burns.

- Automotive sound systems may produce high sound pressure levels. Avoid continuous

exposure to levels over 85dB to prevent permanent hearing loss.

As you read this manual, pay attention to the safety symbols.

Safety

This symbol with “CAUTION” is intended to alert the user to the presence of

important instructions. Failure to heed the instructions will result in risk of injury

to user or product damage.

CAUTION

Read this manual before installing the product. In case of questions contact our technical

support: +55 (18) 3266-4050 or www.taramps.com.br.

At the end of its lifespan, this product must not be disposed of in household waste.

Look for an electronic equipment collection or recycling center for proper disposal.

Declaration of Conformity

Hereby, Taramps Electronics Ltda declares that the product

T 0302 PLAYER MULTICOLOR complies with the Directive

2014/30/EU, according with the following harmonized

standard:

-EN 50498:2010

The full text of the EU Declaration of Conformity is available at

the Product Page on Internet.

TARAMPS ELECTRONICS LTDA

Alfredo Marcondes - SP

Brazil

Electromagnetic compatibility (EMC) -

Product family standard for aftermarket

electronic equipment in vehicles

- 4 EQ controls HIGH, MID HIGH. MID LOW and LOW with ±15dB boost/attenuation.

- Gain for adjusting the input signal level.

The 2 outputs have great amplitude and can deliver up to +18dBu or 6.3Vac of distortion-free

signal.

- Level for output control.

All 3 inputs have independent controls for:

The Player accepts USB DRIVE up to 64GB size, containing MP3 and WMA audio les until

320Kbps bit rate (high quality). Its Bluetooth has the 4.0 version and operates under

SBC/A2DP protocol.

It has a 4-band equalizer that allows you to increase or decrease specic ranges of bass, mid-

bass, mid-high and treble, allowing professional control in any situation. Its outputs with

timed MUTE avoid undesirable noises (Pops) when turned on or oﬀ, dispensing with the

sequencing of activations, facilitating installation.

CHANNELS 2 and 3 feature shared L+R type RCA inputs with an RTS connector for greater

connection exibility.

With a total of 72 variable lighting eﬀects, causing a diﬀerent visual eﬀect for the user. See

pages 08 and 09.

The mixer was designed for sound systems allowing the T 0302 PLAYER MULTICOLOR

mixing of several types of audio signals with high delity, ensuring the original dynamics of

the sound. It has a convenient MP3/WMA player, Bluetooth and FM built-in with long range

remote control.

The T 0302 FX MULTICOLOR features 3 input channels, CHANNEL 1 is balanced with two

shared connections, one XLR and one RTS. This is a high-sensitivity, wide-gain input, which

allows the use of a Microphone or LINE IN.

The sound mixer must be fixed in an easily accessible and

ventilated place. It is not recommended to install the

product on the sides of speakers, as vibrations can

damage their internal components.

In order to avoid noise captation, use good quality

shielded signal cables and connectors.

2 - Borne on the battery negative.

As protection, a fuse must be installed close to the positive

pole of the battery (2A fuse). check for more details on

pag. 16 of this manual. For the REMOTE connection, use

0.5 mm² wire.

1- Borne on the battery positive

Use the P4 adapter with terminal that comes with the

product to connect the power wires to the vehicle's 12V

battery. Use 1.5mm² gauge wires for both the positive and

negative wires. Screw the wires according to the following

instruction:

Presentation

Important recommendations

it is recommended to install a 2 Amperes fuse on the positive supply terminal.

Check power polarity and recommended gauge.

CAUTION

RGB EFFECTS

► USB

SD MP3

MHz

88 88

On this page you have an overview of the T 0302 PLAYER MULTICOLOR sound mixer, you will better

understand the commands on the next page. To be able to use all the product commands, carefully read

all the commands below.

Install the mixer in an easily accessible place and, if fixing is necessary, use the 4 screwing holes to avoid

possible vibrations.

Product overview

Long Range

Antenna

RGB EFFECTS

► USB

SD MP3

MHz

88 88

Screwing holes

Connections

OUT - Outputs

It features an RCA connector in parallel with a connector for TRS. This output mixes all input

signals, including L and R.

This output features a phase inversion button and independent level control, but it also

responds to the MAIN LEVEL control.

AUX OUT

MAIN OUT

This output mixes all input channels, including R and L.

It features an RCA connector in parallel with a connector for TRS.

Unbalanced inputs Inputs for RCA or (TRS 1/4”) connector. They allow you to receive signals

from several types of sound gear such as CD/DVD/MP3-player, audio processors, etc... ... The

LINE 6 input shares the same controls as the built-in PLAYER, with the signals being

downmixed on the input.h high level outputs.

LINE

MIC / LINE 1

Balanced inputs for XLR (Canon) and TRS connectors. ATTENTION: these inputs DO NOT

HAVE PHANTON POWER.

IN - Inputs

Input for USB Drive: USB input for USB DRIVE connection. This input accepts Mp3 and WMA

files up to 320Kbps (high quality).

USB

Audio output for headphones. Use headphones with P10 standard. This output only plays

audio from the built-in PLAYER in stereo.

It is not possible to listen to channels 1, 2, and 3 through this output.

HEADPHONES

Functions Controls

Adjusts the input signal level. It must be used in case of input

saturation, signaled by the CLIP LEDs.

Increases or reduces treble by up to ±15dB

Increases or reduces mid-high by up to ±15dB

Increases or reduces mid-low by up to ±15dB

Increases or reduces Low by up to ±15dB

Adjusts the audio level of the channel (channel 1,

2 or 3) that will be mixed at the outputs.

Mutes the channel mixing at the outputs. It is useful for quick channel

cutting without changing the gain settings. When activated, the red CLIP

LED will light regardless of the input signal level.

Green LED indicates that the channel is receiving signal at its input.

Red LED shows channel input saturation or MUTE button pressed.

LED INDICATORS

Indicates the level of the output signal.

Controls the signal level at the outputs.

Inverts the signal phase of the AUX OUT channel by 180°

Adjusts the audio output level at AUX OUT

PLAYER

FM - MP3 - BLUETOOTH

VOL.

MODE

LONG

RANGE

► USB

SD MP3

MHz

88 88

On / Off

Functions

Player control

stops/continues playback of the current track.

back to the previous folder.

increases the volume of the player.

Long press: Turn off the device.

skips to the previous track.

skips to the next track.

advances to the next folder.

Short press: turns on the device / changes PLAYER function.

reduces the volume of the player.

___skips to the next track. Long press, skips forward in the

currently playing track.

Long press: Turns off only the player, leaving other functions

active.

Vol-: Decreases the volume of the player.

Folder+: Advances to the next folder.

EQ.: Changes the preset equalization. It has 5 modes, is

equal FLAT or NATURAL equalization.

Vol+: Increases the player's volume.

___ goes back to the beginning of the track. Double tap, skip to

prev iou s tr ack . Lo ng p ress, re winds playi ng t rack .

___stops/continues playback of the current track.

Folder-: Goes back to the previous folder. The root directory is

usually the F001 folder.

MODE: Short press: Changes the playback function between

Bluetooth, USB and FM.

Long range control

4- On the long-distance control, press the synchronism keys

__ and simultaneously until the ON/OFF key goes off (check if the long-distance control is

compatible*).

All TLC3000 and Connect Control manufactured from 03/2014 to today's date are compatible with

Player tables.

* The T 0302 PLAYER MULTICOLOR only works with a TARAMPS long-distance control operating at a

frequency of 433.5MHz, FSK modulation with its own encryption.

5- If it doesn't go off, bring the long-distance control closer to the T 0302 PLAYER MULTICOLOR with

the synchronization keys and pressed until the synchronization is done and the ON/OFF key

goes off.

To sync a new remote, follow the instructions:

1- Make sure the T 0302 PLAYER MULTICOLOR is working.

2- With the T 0302 PLAYER MULTICOLOR OFF, press and hold the

ON/OFF key for 10 seconds.

3- The key will alternately flash blue and red, indicating the

synchronization mode between the mixer and the long-distance

remote control.

ON/OFF: Turns the T 0302 PLAYER MULTICOLOR on or off. When

the mixer is on, this key lights up in blue. This key is also used to

synchronize the long-distance remote control, allowing the use

of up to 3 controls simultaneously.

vertical back and forth with white background and dots alternating colors

vertical ﬁll in red

turns oﬀ all RGB eﬀect LEDs

changes the automatic eﬀect randomly

rainbow eﬀect with wave animation

horizontal lines falling and accumulating, changes colors automatically

ﬁxed color: orange

ﬁxed color: faint white

blue background with white pimball animation

palette per function: white gain / eq. green / eco red / level orange

ﬁxed color: cyan

ﬁxed color: yellow

ﬁxed color: red

red background with white pimball animation

rainbow background with pimball (arcade) animation in white

ﬁxed color: green

ﬁxed color: medium white

matrix eﬀect

palette per function: white gain / eq. blue / eco red / level orange

strobe eﬀect in white

purple background with white pimball animation

green background with white pimball animation

palette per function: red gain / eq. purple / eco green / level blue

yellow background with white pimball animation

giroﬂex eﬀect

ﬁxed color: blue

ﬁxed color: pink

ﬁxed color: pink + red

ﬁxed color: strong white

palette per function: white gain / eq. purple / eco green / level orange

cyan background with white pimball animation

ﬁxed color: green + cyan

ﬁxed color: purple

palette per function: white gain / eq. cyan / eco red / level orange

The T 0302 PLAYER MULTICOLOR sound mixer has several lighting effects that can be chosen by

the user. There are two operating modes that alternate depending on the state of the table:

STANDBY MODE: activated when there is no audio output for 10 seconds. At this moment, the RGB

EFFECTS button will set the lighting effect to standby mode.

AUDIO MODE: activated when there is an audio signal output from the table. At this

moment, the RGB EFFECTS button will configure the lighting effect for audio mode.

NOTE: VU-METER effects are only available in AUDIO MODE. This effect works with the

output audio level and serves only as a lighting effect. For greater output level accuracy, use the LED

VU-METER next to MAIN LEVEL.

RGB EFFECTS

STANDBY EFFECTS TABLE

green background with white pimball animation

yellow background with white pimball animation

cyan background with white pimball animation

red background with white pimball animation

purple background with pimball (arcade) animation in white

rainbow background with pimball (arcade) animation in white

blue background with white pimball animation

vu-meter: green background, scale from green to red

turns oﬀ all RGB eﬀect LEDs

VU-meter: purple background, green/yellow/red scale.

muda o efeito automático aleatoriamente

vu-meter: green background, scale from blue to green

vu-meter: white background, range from green to purple

vu-meter: blue background, scale from blue to red

vu-meter: green background, scale from green to red

rainbow eﬀects with wave animation

vertical back and forth with white background and dots alternating colors.

vertical ﬁll in red.

giroﬂex eﬀect

strobe eﬀect in white

efeito matrix

ﬁxed color: orange

ﬁxed color: green

ﬁxed color: green + cyan

ﬁxed color: cyan

ﬁxed color: blue

ﬁxed color: red

ﬁxed color: yellow

horizontal lines falling and accumulating, changes colors automatically.

ﬁxed color: faint white

ﬁxed color: purple

ﬁxed color: medium white

palette per function: white gain / eq. cyan / eco red / level orange

ﬁxed color: pink + red

palette per function: red gain / eq. purple / eco green / level blue

ﬁxed color: strong white

palette per function: white gain / eq. blue / eco red / level orange

ﬁxed color: pink

palette per function: white gain / eq. purple / eco green / level orange

palette per function: white gain / eq. green / eco red / level orange

AUDIO EFFECTS TABLE

Autres manuels pour T 0302

Table des matières

Autres manuels Taramp's Système stéréo de voiture

Taramp's

Taramp's CHIPEO T12.000 Manuel utilisateur

Manuels Système stéréo de voiture populaires d'autres marques

JL Audio

JL Audio Stealthbox SB-CAN-G2MVX3D/10TW3 Manuel utilisateur

Clarion

Clarion PU-9836A Manuel utilisateur

Sony

Sony MEX-BT5750U Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric AR0M Manuel utilisateur

Sony

Sony RM-X7BT Manuel utilisateur

Insignia

Insignia NS-HD5113 Manuel utilisateur

Clarion

Clarion BTD3341 Manuel utilisateur

USA SPECS

USA SPECS PA11-VW6 Manuel utilisateur

Sony

Sony MEX-N4380BT Manuel utilisateur

Kenwood

Kenwood KCD-BT6544U/UY Manuel utilisateur

JVC

JVC KD-DB912BT Manuel utilisateur

Philips

Philips CSQ405/98 Manuel utilisateur

Alpine

Alpine TDM-7544 Manuel utilisateur

Autotek

Autotek TransAm TA 1400 Manuel utilisateur

Clarion

Clarion PN-3124N-A Manuel utilisateur

Denso TEN

Denso TEN FT0108A Manuel utilisateur

Pyle

Pyle PLD57MU Manuel utilisateur

Harman

Harman Chrysler Radio Navigation System RB4 Manuel utilisateur