Tara Laser 2 Manuel utilisateur
USER GUIDE
PLEASE READ ALL INSTRUCTIONS CAREFULLY
The Tara Laser 2 automated pool measuring system gives you precise accurate measurements quickly
and with less setup. Unlike tradional methods of measuring pools, the Tara Laser 2 is fast, reliable and
incredibly accurate. The system is simple and eecve. Whether you are an experienced pool professional
or a novice, you can gather all the measurements you need in a maer of minutes. The Tara Laser 2 delivers
the most detailed measurements possible. Eliminate the hassle of traveling back and forth to the job site for
more measurements. A quick scan by the Tara Laser, will provide Tara Mfg with all the informaon we need
to create a liner that ts like a glove.
360˚ RadiusAutomated Range - 50 metersBluetooth iOS Compable
50m
laser ii
TARA
SAFE OPERATING PROCEDURES
1. DO NOT look into the laser beam and DO NOT unnecessarily aim at other persons.
2. DO NOT open the unit. Doing so, will void the warranty and requires the unit to be returned to Tara Manufacturing for
recalibraon.
3. No user serviceable parts inside.
4. As this is a precision instrument, it should be transported and carried in its case and handled with care at all mes.
5. DO NOT immerse the device in water or other uids.
6. Wipe o dirt and smudges with a damp ssue or so, clean, lint-free coon cloth.
7. DO NOT use aggressive cleaning agents or soluons.
8. Whenever possible, store the device in a dry, shady locaon.
USE
1. Measuring Condions
(a) The opmal measuring condion is in the morning or evening and if the walls
of the pool are in shadow.
(b) Measuring errors can occur when the target surface reects too intensely
(e.g. a mirror) or insuciently (e.g. black fabric), or the ambient light is too bright.
2. Device Preparaon
(a) Charge Laser before use.
(b) Aach Laser to tripod and place near the center of the pool.
(c) Try to locate a spot where the laser will be as perpendicular as possible to all the
walls of the pool. Ex.1
(d) Verify all sides of the pool wall are visible from the laser locaon.
(e) Using a bubble level on the top of the laser unit adjust the tripod so that the laser
device is level.
(f) Laser can experience interference from reecons on the walls of the pool.
It is best to use the laser when the sun is low or the sky is overcast.
USER GUIDE
Laser Device
Charging Port:
» Use only the charger
provided with unit
DEVICE CONTROLS
Ex.1
In this example the device should be set back
from the exact center, to capture the inside
radius of the kidney.
Tara Liners & Safety Covers • 256-725-2500 • www.taraliners.com/laser
GoodGoodPoorPoor
Power Switch:
» On: Illuminated
» O: Dark
3. Pool Preparaon
(a) Drain pool and remove liner and any material aached to pool wall.
(b) Coat the pool wall with neutral reecve surface (laser spray). Ex. 2
(c) Idenfy break lines and place triangle markers at these break points.
5. Prior to Scanning
(a) Before running the laser, nd your manual pool measurements. Manually measure the shallow
end and deep end depths, side walls, back walls and any other features.
(b) Record all measurements on the Tara Laser 2 order form and ll out the form completely.
Ex. 3
Download Tara Laser 2 order form at www.taraliners.com/forms.
(c) Take a physical measurement, of the shallow end break, using a tape measure and record this
measurement on the order form.
4. Scanning the Pool
(a) Turn Laser power switch on.
Ex. 4
(b) Start the Tara Laser 2 App on the iPad.
(c) In the App press the Connect buon.
(d) In the App press the Level buon. The laser will rotate 90° and stop. Check to make
sure the lasers are equal on each side of the pool.
(e) Repeat this to make sure that it is level in the lasers are level for the front and back
of the pool.
(f) Force quit the App
(g) Then restart the App and press the Connect buon again
(h) Press the Add Photo buon and take a picture of your manual measurements. Ex. 5
(i) Scan either Fast or Slow. The iPad display will change from the Control Screen to
begin showing the pool perimeter Ex. 4. A fast scan will be nished in 3.5 min and
record up to 1000 points. A slow scan will take 5 min 40 sec and record 1800 points.
(j) When the scan is complete then press the Send Data buon. An Email will open.
Add any addional informaon and Send the email.
(k) Power down the Laser. The iPad will send the email when it connects to the
internet again.
LINER ORDER FORM - TARA LASER
2294 Old Highway 431 • Owens Cross Roads, Al 35763
Ph: (256)725-2500 or (866)725-8272 • Fax: (877)333-8272
ww w
.
ta r a l i n e r s
.
co m
Wall
Floor
Depth
Length
SAFETY LEDGE
q
SKETCH THE SHAPE OF THE POOL
COVE
q
(in.)
WALL:
(in.)
(in.)
DEPTH:
(in.)
LENGTH
:
(in.)
DEPTH AND WALL MEASUREMENTS
MANUAL MEASUREMENT
(SHALLOW END BREAK)
IMPORTANT!
PLEASE INCLUDE ONE MEASUREMENT, OF THE SHALLOW END BREAK, TAKEN WITH A
TAPE MEASURE TO CHECK THEACCURACY OF THE OVERALL MEASUREMENT.
J
K
N EMLI
G
View From
Deep End
H
(J)
:
(ft.)
(in.)
SHALLOW END
(K)
:
(ft.)
(in.)
DEEP END
(G)
:
(ft.)
(in.)
SIDE WALL1
(I)
:
(ft.)
(in.)
SIDE WALL 2
(L)
:
(ft.)
(in.)
BACK WALL
X
X
Y
X
Y
Y
(Y):
(in.)
(X):
(in.)
q q q
1 2 3
1
2
3
q
6
"
RADIUS
q
RADIUS
q
DIAGONAL
INCHES
q
45º
q
90º
q
90º
q
90º
(in.)
VINYL STEP
STEP CORNERS
SET BACK
FLOOR
q
NO
q
NO
q
NO
THICKNESS
q
YES
q
YES
q
YES
ROD
POCKETS BEADED
STEP
FOAM
INDICATEPOSITION OF VINYL STEP
IFAPPLICABLE
STEP DETAILS
DO NOT INCLUDE STEPSACROSS THE WIDTH OF THE POOL
IN THE OVERALLLENGTH “B” MEASUREMENT
(in.)
(in.)
INSIDE CORNER (TRUE L & T-SHAPE POOLS)
Date: Due:
DEALER
Company:
Address:
Contact: ______________________ Phone:___________________
E-Mail:
DISTRIBUTOR
Company:
Address:
Contact: ______________________ Phone:___________________
E-Mail:
SHIPPING INSTRUCTIONS
Branch:
q
Dealer:
q
Pick Up:
q
Ship Via:
Other:
ORDER INFORMATION
PO #:
Job Name:
Price:
Serial #:
Stock #:
Sidewall Pattern:
Bottom Pattern:
MOUNTING
Beaded:
q
Overlap:
q
Overlap Size:
COMMENTS
CITY
CITY
STATE
STATE
ZIP
ZIP
For Additional Order Forms visit, www.taraliners.com/forms
INCHES
2294 Old Hwy. 431, Owens Cross Roads, AL 35763
Ex. 2
Ex. 3
Ex. 4
Ex. 5
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Tara Laser 2 is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is up to and including 90 days from the receipt of shipment. Parts, product
repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Tara Laser 2 authorized reseller, and does not apply to fuses, disposable baeries, or to
any product which, in Tara Manufacturing’s opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal condions of operaon or handling. Tara Manufacturing warrants that
soware will operate substanally in accordance with its funconal specicaons for 90 days and that it has been properly recorded on non-defecve media. Tara Manufacturing does not warrant that soware will
be error free or operate without interrupon. Tara Manufacturing’s warranty obligaon is limited, at Tara Manufacturing’s opon, to refund of the purchase price, free of charge repair, or replacement of a defecve
product which is returned to a Tara Manufacturing within the warranty period. To obtain warranty service, contact Tara Manufacturing (2294 Old 431 Hwy., Owens Cross Roads, AL, 256-725-2500) to obtain return
authorizaon informaon. Then send the product as instructed, with a descripon of the diculty, postage and insurance prepaid (FOB Desnaon). Tara Manufacturing assumes no risk for damage in transit. Follow-
ing warranty repair, the product will be returned to Buyer, transportaon prepaid (FOB Desnaon). If Tara Manufacturing determines that failure was caused by neglect, misuse, contaminaon, alteraon, accident, or
abnormal condion of operaon or handling, including overvoltage failures caused by use outside the product’s specied rang, or normal wear and tear of mechanical components, Tara Manufacturing will provide an
esmate of repair costs and obtain authorizaon before commencing the work. Following repair, the product will be returned to the Buyer transportaon prepaid and the Buyer will be billed for the repair and return
transportaon charges (FOB Shipping Point).
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TARA MANUFACTURING SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUD-
ING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY. Since some countries or states do not allow limitaon of the term of an implied warranty, or exclusion or limitaon of incidental or consequenal
damages, the limitaons and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdicon,
such holding will not aect the validity or enforceability of any other provision.
Tara Liners & Safety Covers • 256-725-2500 • www.taraliners.com/laser
TROUBLESHOOTING
Laser stops in the middle of a measurement: Somemes the laser will pause for a second to calibrate. Allow it
5 - 10 seconds to complete the calibraon process.
Laser stops and won’t connue for longer than 10 seconds: A strong glare from the pool walls, can inter-
fere with the laser and cause it to freeze. Try shading the wall of the pool where the laser is measuring. If this doesn’t work wait to
measure the pool when condions are not as bright.
Laser device can not connect to App: The laser connects via Bluetooth signal to an iPad or iPhone. If the distance
between the laser and the iPad or iPhone is too great it will loose signal. Try moving the iPad or iPhone closer to the laser.
Sharp spikes on the diagram display: The surface is too bright or reecve and is interfering with the laser.
For all other issues call Technical Support, 256-725-2500. Never aempt to open the case
of the laser!
LASER CLASSIFICATION
The Tara Laser 2 generates a visible laser beam that is emied from the front of the device. The device complies with laser class 2
according to:
_ IEC60825-1: 2007 Safety of laser products
_ EN60825-1: 2007 Safety of laser products
Laser class 2 products
Do not look into the laser beam and do not unnecessarily aim at other persons. The eye is usually protected by prevenve reac-
ons such as the eyelid closure reex.
WORKING SPECIFICATIONS
Range 6 inches to 100 feet
Measuring accuracy Typ.: ± 0.12 in*
Laser class 2
Laser type 635 nm, < 1 mW
Baery run me: up to 4 complete pool measurements
Temperature range:
- Storage (-13°F to +130°F)
- Operaon (32°F to +90°F)
* Under favorable condions (good target surface, room temperature) up to 10 m (33). Under unfavorable condions such as
bright sunlight, a weakly reecng target surface or large temperature uctuaons, the deviaon can rise causing errors or shut-
down of the unit.
laser ii
TARA
Table des matières
Autres manuels Tara Instrument de mesure
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur