Tao Tech Digital Technology Titan-jet 1902 Manuel utilisateur
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -1-
Integrity Excellence Profession
Tao Tech Digital Technology CO.,LTD is a professional manufacturer and supplier
engaged in R&D, Manufacture and Distribution of digital inkjet printer equipment. We
research and development the high speed, high resolution and stable printing control system in
many kinds of industry printing application by USATRIDENT and Japan EPSON
print-head ,such as textile ,ceramic ,solvent, water base, UV printing.
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -2-
Titan-jet 1901/1902 water base & eco-solvent piezo printer
Instruction manual
Statement of responsibility and copyrights
The manual is just for assembling the printer after you purchased the Titanjet 1901 or 1902.
Our company does not responsible for any expression and obligation on content. Maybe there
are many writing errors and careless omission of technical description even if detailed
examination, we would like to accept advice to improve our service.All works by Tao Tech
Digital Technology CO.,LTD , and the work copyright law by the People’s Republic of China
Copyright Law protection. Do not engage in part or all in of the manual additions and deletions,
adapt, excerpt, reproduce or imitate behavior without agreement.
Index
Page
Foreword introduction-------------------------------------------------------------------------------- 01
Chapter I Brief introduction
1) Power Supplier safety------------------------------------------------------------------------------------04
2) The Do’s and The Don’ts--------------------------------------------------------------------------------04
3) Safety location and use of environment---------------------------------------------------------05
4) Ink Location and use precautions--------------------------------------------------------------------05
5) Performance parameters--------------------------------------------------------------------------------05
Chapter II Installation of Printer
1 、To know about TITAN JET Printer ---------------------------------------------------------------07
2 、Operating instructions of Keypad -----------------------------------------------------------08
3 、Installation -------------------------------------------------------------------------------------------08
4 、Electrify、Carriage reset、outer setup、material forward and backward-----------11
Chapter III Use of MainTop
1 、 Installation--------------------------------------------------------------------------------------12
1), How to Install Maintop-------------------------------------------------------------------------12
2) Setup of printer driver and printing interface ----------------------------------------------13
2 、How to use Maintop------------------------------------------------------------------------16
3 、Printing images----------------------------------------------------------------------------19
4 、Others about Maintop ----------------------------------------------------------------------22
Chapter IV Printing Control System
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -3-
1 、Installation of software and USB driver----- ------------------------------------------22
2 、Main Menu--------- ----------------------------------------------------------- -------------------28
1) File Menu ------------------------------------------------------------------------------------------------------28
2) Printing Menu -----------------------------------------------------------------------------------29
3) Tools ----------------------------------------------------------------------------------------29
4) Help ------------------------------------------------------------------------------------------29
3 、Tool Bar Introduction------------------------------------------------------------------------29
4 、Printing -----------------------------------------------------------------------------------------30
5 、General settings ---------------------------------------------------------------------------------30
6 、Status information--------------------------------------------------------------------------------30
7 、Other information about Printing control system------------------------------------------31
1) Print head Printing Parameter ---------------------------------------------------------------------------------31
2) Print calibration -------------------------------------------------------------------------------------------------31
3) Other parameters calibration----------------------------------------------- -------------------------------33
8、Adjust after control software installed----------------------------------------------------36
Chapter V Maintenance guide-------------------------------------------------40
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -4-
Chapter I Brief Introduction
Summary
Thank you very much for purchasing our product, this manual can help you to assemble and
use the printer, through the index, you can find the topic related quickly. Please place the
reference manual easy to reach.
This manual is made up of four parts: 1):How to operate the Printer ,
2):How to use Printing control software
3):How ot use Maintop software,
4):Daily Maintenance of Printer
The machine have passed the strict inspection before delivery and attached labels .To avoid
damage to the printer,please read the manual carefully before you use the printer。
1. Power supplier safety
Attention: For safety of the operator and Printer, ground wire must be connected! The printer
should be installed by qualified maintenance technician。
A. Power supply: single-phase 220VAC /50HZ. Max power: 1000W, Print power: 100W
B. Using only the power type that the printer label identified. You can choose 110V AC or 220VAC power
supply according to your countries or regions’applications.
C. Connecting all equipments to a properly ground outlet to avoid the use of sockets with those in the
frequent switching between on and off the device (such as: photocopiers, air-conditioning systems) in the same
circuit.
D. Avoid to use of wall-board switch or autotimer controlled outlet, always turn off your printer by the power
switch which is on the right side of printer.
E. Do not use damaged or broken power wire.
F. If additional power wire has to be used, make sure the sum of amperage of other device and the additional
power device can not exceed the rated amperage of the power supply. Do remember the sum of amperage of
other devices and the additional power wire plugged into the wall can not exceed the wall outlet’s rated
amperage of power supply.
G. Keep your computer system away from electromagnetic interference source(s) such as loudspeaker or
wireless telephone. Do not try to repair printer by yourself while meet problems, seeking for help from printer
maintenance technicians in time.
2. Attentions for operating printer
A、Don’t plug off printer power supply or other related data cable before printer power supply has been turned
off.
B、To avoid the unnecessary loss caused by behind cleaning the tools or other articles which put on the print
table or cover of printer by careless after machine running., Do not put tools or other articles on printer
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -5-
table or cover.
C、Make sure the carriage has been fixed on the original place before moving printer.
3. Attentions for installation and use environment
The printer should be positioned stably and levelly, and well for ventilation, for easier plug on/off, Place
your printer close to wall outlet. Don’t exposure printer under sunlight, highlight or other heat sources to keep
a good temperature and humidity environment. Using temperature：18-30℃; Humidity：40%-80%. For best
printing status, air conditioner and thermometer are required. Printer must far away from strong radiation
interference source.UPS and power stabilizer (power above 1500W) is suggested to adopt.
4. Attentions for Ink placement and using
Ink should be out of reach of children to prevent them touch or inhale in, washing with soap and water if ink
contact with skin; washing with fluid water immediately if ink contact with eyes; to avoid ink leakage, don’t
shaking the ink bottle; after a period (2 months) of using, ink bottle should been cleaned and dry in the air,
cleaning printer before replace new ink bottle to make sure printing quality. Store ink in a cool place and
don’t exposure under sunlight
5、Parameter
Print-head Epson DX5 Resolution 1440 DPI
Number of
print head 1 / 2 Number of
Nozzle 1440 (8 * 180)
Color C M Y K Color Range 16.7million
Print table
width 1930 MM Print width 1900 MM
2 PASS 68 m2 /hr
4 PASS 34 m2 /hr
6 PASS 24 m2 /hr
Speed
8 PASS 16 m2 /hr
Ink Aqueous, pigment,
Eco-solvent,sublimaiton Color
Management ICC or density curve
RIP Software MAINTOP 5.3 Operation
System Windows2000, XP
Interface USB 2.0 Power Supplier 50HZ/60HZ,220V/110V,
10A
Heating Front heating Dry Fun
Material Paper, Frontlit, Flex banner,
mesh, leather… Image format Bmp,TIF,Jpg,Pdf…
Media
Handling Roll to roll, sheet by sheet Humidity 40% - 70%
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -6-
Dimension 3.15M * 0.82M * 0.68M Weight 280 KG
Chapter II Installation and Acquaintance of Printer
1、Acquaintance of Printer
Illustration of Titan-jet 1901/ 1902 water base & eco-solvent piezo printer
2.Keypad operating instruction of Titan-jet 1901/1902 water base & eco-solvent piezo printer
Clean: Automatic Ink suction button
Roller Start: Automatic material feeding, take up button
Print/Pause: Printing start, pause，continue button
Fan: Fun button for drying
Move Up: Material move backward button
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -7-
Move Down: Material move forward button
3. Installation of Titan-jet 1901/1902 water base & eco-solvent piezo printer
Installation steps after unpacking：
3.1：unpacking: Remove the Buffer foam and dustproof plastic wrap after unpack, take out of all spare parts, check
Attention：Check carefully to confirm no spare parts lost!!！
3.2：installing the stand
Take out 2 stander, stabilize beam。to fix stander with 10pcs M6*10 inner hexagon screw。Fix the Square stabilize beam on the stander
with 8pcs M5*10 cross screw.(See illustration)
Installation illustration of Stander and Square stabilize beam
3.3 Installation of material holder and fans
3.3.1. Installation of material holder
A: Fix the material holder on standers with 16 pcs M4*10 cross screw(each side 8 pcs screw)。
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -8-
B: Wear the material holder tray on steel roller, fix the square metal and steel roller with 10 pcs M4*10 cross screw
onto stander(each side 5 pcs screw),Install it well so as to material feeding can be controlled well when printing.
3.3.2，Installation of fans.
Fix the fan on stander with 6 pcs M5*10 cross screw(each side 3 pcs screw) See illustration below:
Overall view of printer stander ：
3.4. Installation of body (printing part)
Remove the Buffer foam and dustproof plastic wrap after unpack, put on stander in right position by forklift and fix
with 4 pcs M5*20 cross screw
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -9-
Assembling illustration
Attention：Be careful when assembling to make sure every step is accurate and screw fix well
Overall view of printer：
4 、Electrify, reset of carriage and others
4.1. take out the power wire from spare parts box and connect printer to 220VAC power supplier,
main board will release a bee sound when press the switch on, and the 6 lights on the carriage will
lighting, see illustration:
6 Lights
4.2.The carriage will move to left slowly when turn on the printer, then to left a little while the limit stopper which
on the right front of the carriage move to the upside position of the yellow limit switch and at least arrived at the middle
of limit switch, during this action, the red light on limit switch will gleam，at the same time, the main board will respond
http://www.titanjet.com.cn
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China -10-
a sound, this actions mean the carriage reset normal, otherwise you need to check if the connections of machinery and
limit switch connect well or not.
Limited switch
4.3 press the fun button on the key panel ，turn on the power button in the front of the printer.
check all funs work well or not, turn on the button for front, middle, back heating, check heating system
work well or not。
Ce manuel convient aux modèles suivants
1
Table des matières
