Tanita KD-191F Manuel utilisateur

KD1917611(1)1008FA

Digital Scale

KD-191F

Instruction Manual

Digital Scale Instruction Manual

Read this Instruction Manual carefully and keep it for future reference.

◆Battery placement

◆Hook Hanger

◆Inserting photographs or patterns etc.

This scale can be hung on a hook for convenience.

When not using the

hook hanger, press it

into the scale until it

clicks for storage.

Unlock the lock.

Insert 2×“AAA” “R03” or “24F”

batteries as indicated.

Push ON/TARE.

Remove the clear

cover.

Place the photograph

or pattern on the tray

in line with the guides

(points).

Place a bowl on

the tray.

Align the clear cover

with the bottom of the

tray, and gently place

the clear cover back

on the tray.

Push ON/TARE to

subtract the weight of

the bowl.

Lock the lock.

Place the material to

be weighed.

After removing the bowl, the display will show a

negative reading or “----”. Press the ON/TARE button

to return the display to “0”. Push OFF to turn off.

Do not hang the scale in a location where it can swing, drop easily, or in an

otherwise unstable place. Doing so may damage the scale or cause injury due to

the scale colliding with another object or dropping from the hook. Also, do not

use a suction pad hook, double-sided tape hook, or weak magnet hook. Such

hooks may not be able to support the weight of the scale, causing it to fall.

click click

g version

oz version

◆Weighing If the weight of the item(s) exceeds the scale’s capacity, “EEEE” will appear on the display. Make sure you place item(s) in

the center of the tray.

◆Mode change

◆Automatic power off

◆Battery replacement

Push ON/TARE. When a mode change is required, press ON/TARE and OFF buttons simultaneously, and then

select the proper mode. (for the g/oz version)

The scale is designed with an auto power-off function for energy efficiency. If the same reading is displayed for

more than 10 minutes the scale will automatically turn off.

If “Lo” appears in the display when attempting to weigh, replace the battery. (following previous instructions)

Double-sided tape can be used to hold the

photograph or pattern in place.

To cover the entire surface of the tray with a

photograph or pattern, cut the photograph or

pattern to the same size as the paper that was

included with the scale. (max. 5 in × 4.7 in)

A Lock

B Clear cover

C Tray

D OFF button

E Display

F ON/TARE button

G Hook hanger

H Battery compartment

I Lid (Battery compartment)

Name of parts

How to use

• The power doesn’t turn on.

Insert 2 new size AAA (“R03” or “24F” ) batteries. Be sure that

the polarity of the batteries is set properly.

• “Err6” or “Err7” appears on the display.

The scale needs to be repaired. Please contact your retailer.

MODEL KD-191F

g/oz version

Capacity 3kg/105 oz

Minimum graduation 1g/0.05oz

Federal Communications

Commission and Canadian

ICES Notice

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules and Canadian ICES-003. These

limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

l Reorient or relocate the receiving antenna.

l Increase the separation between the equipment and receiver.

l Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

l Consult the dealer or an experienced radio or television technician

for help.

Modifications

The FCC requires the user to be notified that any changes or modifications made to

this device that are not expressly approved by Tanita Corporation may void the user’s

authority to operate the equipment.

Trouble shooting Specification

1-14-2, Maeno-cho, Itabashi-ku

Tokyo, Japan

Tel : +81-(0)3-3968-7048

Fax : +81-(0)3-3967-3766

Level 8, vibgyor Towers, G Block, C-62

Bandra Kurla Complex, Bandra (East),

Mumbai 400051, INDIA

Tel : +91-22-4090-7174

Fax : +91-22-4090-7178

This scale is a precision instrument and must be used under certain conditions to

ensure accurate measurement. Please observe the following when using this

scale.

1. Never disassemble the unit.

Use in a vibration-free location that is not exposed to direct sunlight.

3. The scale will not measure accurately in an environment subject to

large temperature and humidity changes. The unit takes approximately

two hours to adjust to such changes.

4. Keep chemicals off the scale. Wipe with a damp cloth from time to time.

5. Do not allow the scale to get wet.

Do not use or store near heat sources(ovens, heaters, etc.).

7. When not used for a long time, remove the batteries and store the unit

in a dry, dust-free location.

8. Check and replace batteries before sending the unit for repair. If

repair is necessary, remove the batteries, repack the unit in the

original carton and protect with packing materials before shipment.

9. Do not leave objects on the weighing tray when the scale is not in use.

10.To avoid measurement error, do not measure while using equipment

that generates radio waves, such as mobile phones.

CAUTIONS

Table des matières

Autres manuels Tanita Échelle

Tanita

Tanita Ironman InnerScan 50 Manuel utilisateur

Tanita

Tanita BWB-800A Mode d’emploi

Tanita

Tanita PROFESSIONAL MINI 1210N Manuel utilisateur

Tanita

Tanita HD-366 Manuel utilisateur

Tanita

Tanita BWB-800A Mode d’emploi

Tanita

Tanita BC-718 Manuel utilisateur

Tanita

Tanita Tanget-102 Manuel utilisateur

Tanita

Tanita BF-522 Manuel utilisateur

Tanita

Tanita WB-3000 plus Manuel utilisateur

Tanita

Tanita Inner Scan Body Composition Monitor BC-536 Manuel utilisateur

Tanita

Tanita BF-579 Manuel utilisateur

Tanita

Tanita KP-601 Manuel utilisateur

Tanita

Tanita BC-731 Manuel utilisateur

Tanita

Tanita BF-679W Manuel utilisateur

Tanita

Tanita SC-330ST Manuel utilisateur

Tanita

Tanita innerScan Dual RD-545 Manuel utilisateur

Tanita

Tanita BC-1000 Manuel utilisateur

Tanita

Tanita WB-3000 Manuel utilisateur

Tanita

Tanita 2000 Manuel utilisateur

Tanita

Tanita KP-400G Manuel utilisateur

Tanita

Tanita BC-G03 Manuel utilisateur

Tanita

Tanita BF-626W Manuel utilisateur

Tanita

Tanita UM-071 Manuel utilisateur

Tanita

Tanita DC-360 Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur

Fidelity Electronics

Fidelity Electronics G2e Manuel utilisateur