T&D TR-73U Manuel utilisateur

Thermo Recorder

TR-73U

2006.12 16004484011

Notice about this User's Manual

In order to properly use this product, please carefully read this manual before using.

T&D Corporation accept no responsibility for any malfunction of and / or trouble with

this product or with your computer that is caused by the improper handling of this

product and will deem such trouble or malfunction as falling outside the conditions for

free repair outlined in the attached warranty.

- All rights of this User's Manual belong to T&D Corporation. It is prohibited to use,

duplicate and / or arrange a part or whole of this User's Manual without the

permission of T&D Corportion.

- Microsoft and Windows are registered trademarks of Microsoft Corporation USA and

are binding in the USA and all other countries.

- Company names and product names are trademarks or registered trademarks of

each company.

- Please follow the safety precautions carefully.

We cannot guarantee nor are we responsible for safety if this product is used in any

manner other than was intended.

- Speciﬁcation design and other contents outlined in this manual are subject to change

without notice.

- One screen messages in this manual may very slightly from the actual messages.

- Please notify the shop where you purchased this product or T&D Corporation of any

mistakes, errors or unclear explanations in this manual. T&D Corporation accepts no

responsibility for any damage or loss of income caused by the use of our product.

- This product has been designed for private or industrial use only. It is not for use in

situations where strict safety precautions are necessary such as in connection with

medical equipment, whether directly or indirectly.

- We are not responsible for any malfunction or trouble caused by the use of our

product or by any problem caused by the use of measurement results of our unit.

Please be fully aware of this before using our product.

- Some of our products, which come under the category of stategic goods in foreign

trade law, need the permission of the Japanese government to be exported outside

of Japan.

- This User's Manual cannot be reissued, so please keep it in a safe place.

- Please read the warranty and provisions for free repair carefully.

FCC Compliance Statement for American Users

This device complies with Part 15 of the FCC Rules.

Operation is subject to following two conditions: (1) this device may not cause harmful

interference. and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A

Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Warning

This equipment has been veriﬁed to comply with the limits for a Class A personal digital

device, pursuant to Subpart B of Part 15 of FCC Rules. Only peripherals (computer

input/output devices, terminals, printers, etc.) certiﬁed or veriﬁed to comply with the

Class A or B limits may be attached to this equipment. Operation with non-certiﬁed or

non-veriﬁed personal computer and/or peripherals is likely to result in interference to

radio and TV reception. The connection of a non-shielded equipment interface cable to

this equipment will invalidate the FCC Certiﬁcation of this device and may cause

interference levels which exceed the limits established by the FCC for this equipment.

You are cautioned that changes or modiﬁcations not expressly approved by party

responsible for compliance could void your authority to operate the equipment.

iii

Safety Precautions and Instructions

To ensure safety be sure to obey all of the following

warnings.

The following items should be strictly obeyed for the safe usage of this unit, and for

protecting yourself and other people from bodily harm and / or damage to property. To

ensure the proper use of our product, please read the following carefully and fully

understand the contents.

Explanation of Symbols

Explanation of Warning Symbols

DANGER

These entries are actions that absolutely under no circumstance

should be taken. The taking of such an action may cause serious

personal physical damage or death.

CAUTION

These entries are actions that if taken may lead to physical injury or

damage to persons or things.

Explanation of Picture Symbols

Denotes an important warning or caution.

Denotes a forbidden action. Inside or near the symbol will appear

another symbol giving details.ȪExȇstands for DO NOT TAKE

APARTȫ

Denotes an action that you must take.

DANGERS

Do not take apart, repair or modify the main unit.

Doing so may cause ﬁre or electrocution.

If water or a foreign body enters into this unit, immediately

remove the batteries and stop using.

Continued use may cause ﬁre or electrocution.

Do not use this unit in wet or humid places, such as a bathroom.

Store main units, sensors, batteries and communication cables

out of the reach of children.

It is dangerous to touch or swallow batteries.

If any smoke or strage smells are emitted from the unit,

immediately remove the batteries and stop using.

Continued use may cause ﬁre or electrocution.

This device is designed to measure and record temperature and

humidity. Do not use it for any other purpose than to measure

and record temperature and humidity.

CAUTION

This unit is not water-resistant.

If the unit gets dirty, wipe it with a clean cloth and a mild detergent.

Do not expose the unit to harmful gases or chemicals. It may

cause corrosion and / or other danger to the unit and to people

handling the unit.

Do not use batteries other than speciﬁes. Doing so may cause

ﬁre or damage.

Battery terminals may provide insufﬁcient contact due to age or

vibration.

This may lead to data loss.

Condensation may occur if the units is moved from one

environment to another where the difference in temperature is

great.

Use the unit in an environment where the ambient temperature is

great.

Use the unit in an environment where the ambient temperature is from

-10 to 60Ɏand the humidity is 90%RH (no condensation) or less.

To prevent damage to the unit from static electricity, remove

static electricity from your body by touching metal aroung you

(door knob, window frame) before touching the unit.

Static electricity may cause not only damage to the unit, but may

cause breaks in or a loss of data.

If the unit will not be used for period of time, for safety reasons

please remove the battery.

If left in the unit, it may leak and lead to malfunctioning.

Please take extra caution when plugging in and pulling out the

USB plug while another USB device such as CD-RW/HDD is in

operation.

It may cause problems to your CD-RW or other device.

CAUTIONS

We shall not guarantee the operation of our device if you have

connected it to your computer using a USB hub or a USB extension

cable.

Batteries used under low pressure conditions may leak and cause

a malfunction.

Please do not insert your ﬁngers or any foreign objects into any of

the devices' jacks.

Do not use any other batteries than those that are speciﬁed in this

User's Manual.

It may cause a ﬁre or other trouble including malfunction.

Do not use or store the Thermo Recorder in any of the following

places. Doing so may cause electrocution, ﬁre and / or other

adverse effects to the device and / or your computer.

-Areas exposed to direct sunlight

This will cause the inside of the device to become overheated and may

cause ﬁre, deformation, and / or other damage including malfunction.

-Areas prone to strong magnetic ﬁelds

This may cause damage including malfunction.

-Areas exposed to water leakage

This may cause electrocution or other damage incluing malfunction.

-Areas exposed to excessive vibration

This may cause injury, malfunction, damage or loss of proper electrical

contact.

-Areas near ﬁre or exposed to excessive heat

This may cause damage including malfunction and deformation.

-Areas prone to smoke, duct and dirt

This may cause damage including malfunction.

vii

Cautions about using the Sensors

Cautions about using the temperature/humidity sensor TR-3100

The sensor can measure temperature within the range of 0 to 50Ɏ

and humidity within the range of 10 to 95%RH.

Only use the sensor within these ranges.

If extremely severe temperature changes occur, the humidity

measurements may appear abnormal.

Once the sensor's temperature becomes stable, the measurements will

return to normal.

This sensor is not waterproof. Do not get wet.

When measuring with the temperature/humidity sensor in an

environment of 0 to 50Ɏand less than 30%RH, the measurements

may sometimes ﬂuctuate. This is not abnormal.

viii

Table of Contents

Notice about this User's Manual--------------------------------------------------------------------i

FCC Compliance Statement for American Users --------------------------------------------- ii

Warning -------------------------------------------------------------------------------------------------- ii

Safety Precautions and Instructions ------------------------------------------------ iii

To ensure safety be sure to obey all of the following warnings.--------------------------- iii

Explanation of Symbols----------------------------------------------------------------------------- iii

About Thermo Recorder TR-73U-----------------------------------------------------2

Outline----------------------------------------------------------------------------------------------------2

Basic Functions ---------------------------------------------------------------------------------------- 2

Package Contents------------------------------------------------------------------------ 4

Part Names and Functions------------------------------------------------------------- 5

Part Names and Functions--------------------------------------------------------------------------5

LCD Display --------------------------------------------------------------------------------------------6

Installing the Battery ----------------------------------------------------------------------------------7

Turning ON the Power-------------------------------------------------------------------------------- 7

Installing the USB Device Driver------------------------------------------------------8

[Windows®XP]----------------------------------------------------------------------------------------- 8

[Windows®2000] ----------------------------------------------------------------------------------- 11

[Windows®Me] -------------------------------------------------------------------------------------- 14

[Windows®98] --------------------------------------------------------------------------------------- 16

If Installation Fails ---------------------------------------------------------------------- 19

How to Re-install ------------------------------------------------------------------------------------ 19

Connecting the Sensors -------------------------------------------------------------- 20

Connect the Sensor--------------------------------------------------------------------------------- 20

Starting Recording from Main Unit Button --------------------------------------- 21

Start Recording -------------------------------------------------------------------------------------- 21

Stop Recording -------------------------------------------------------------------------------------- 21

Setting Recording Interval from Main Unit Button------------------------------ 22

Changing the LCD Display Mode from Main Unit Button--------------------- 23

Speciﬁcations---------------------------------------------------------------------------- 24

Optional Accessories ------------------------------------------------------------------ 25

Cautions about using the Sensors

[Handling the temperature/humidity sensor]

- The temperature/humidity sensor should probably be changed after a period of about

one year. After removing the sensor from its package, please change the

temperature/humidity sensor after one year's usage.

During use the temperature/humidity sensor will accumulate impurities (dirt) on the

surface of the sensor is being used in a bad environment (smoky or dusty places) it

may be necessary to change the sensor sooner.

- When the temperature/humidity sensor is not being used, please place it in the

attached vinyl bag with the drying agent included and store it in a cool dark place with

a temperature of between 5 to 25Ɏand a humidity of below 30%RH.

- Attached to the temperature/humidity sensor are two stickers: a wetness detection

sticker and a temperature detection sticker. If either of the stickers shows abnormality,

you should change the old sensor to a new one immediately.

Wetness Detection Sticker Temperature Detection Sticker

-Wetness Detection Sticker

Informs you that the sensor has been wet.

Normal Abnormal

Under normal conditions,

black dots will appear on a

white

Under abnormal conditions, it will

turn to red.

-Temperature Detection Sticker

Informs you that the sensor measured a temperature measurement over 60Ɏ.

Normal Abnormal

Under normal conditions,

the number 60 will lightly

appear on a pinkish white

background.

Under abnormal conditions, the

number 60 will clearly appear on

a red background.

Autres manuels pour TR-73U

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur