Talkpod A36-M7B4UV1 Manuel utilisateur
Multi-Band Portable
Transceiver User Manual
Thanks for your favor in our product.
This manual is helpful for you to quickly know how to use the product.
This manual is applicable to the following product:
Multi-Band Portable Transceiver
Contents General information
General information
Preface
Disclaimer
RF Radiation Information
RF Radiation Profile
RF Radiation Safety
Operational Instructions and Training Guidelines
EU Regulatory Conformance
Basic Operation And Installation
Radio Structure
Radio Packing
Button Details
Specifications
Attach Battery
Assemble Antenna
Assembling the Belt Clip
LED Indicator
Assembling the Accessories
Charge the radio
Powering On/Off
Button Details
Channel Selection Button
Side Buttons
PTT Buttons
A36 menu description
Care
Troubleshooting
Optional Accessories
Product Care
Preface
Thanks for your favor in our product. This manual is helpfulfor you to quickly know how to use the prodcut.
This manual is applicable to the following product:B3X PMR446 Portable Radio (X may represent 0-9)
RF Radiation Information
The radio is not intended for use by general population in an uncontrolled environment. It is only for occupational useand only applied to work-related conditions. The
radio must be only used by users, who are fully awareof the hazards of the exposure and who are able to exercise control over their RF exposure to qualify for
thehigher exposure limits.
RF Radiation Profile
Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted. RF technology is widely used in communication,
medicine,food processing and other fields. It may generate radiation during use.
01
01
01
01
01
02
02
02
05
06
06
07
07
08
08
09
09
09
10
03
03
04
04
05
14
15
17
Belt Cilp x 1 Battery x 1 Strap x 1 Antenna x 1 Charger x 1
1.Radio Structure
2.Radio Packing
03
LED
Side Button 1
Side Button 2
Power/Volume
Antenna
Belt Clip
PTT
Microphone
Accessory Jack
Battery
Speaker
Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines,
users should transmit no more than 50% of the time and always adhere to the following procedures:
RF energy will be generated only when the radio is transmitting.
The radio must be 2.5 centimeters away from humanbody when transmitting.
User Manual 02
RF Radiation Safety
In order to ensure user health, experts from relevant industries including science, engineering, medicine andhealth work with international organizations to develop
standards for safe exposure to RF radiation. These standards consist of:
United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J;
American National Standards Institute (ANSI)/Instituteof Electrical and Electronic Engineers (IEEE) C95. 1-1992;
Institute of Electrical and Electronic Engineers (IEEE) C95. 1 – 1999;
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998;
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the essential
requirements and other relevant provisions of the Directive 1999/5/EC.
Please note that the above information is applicable to EU countries only.
Screen
Keyboard
SOS Button
3. Button Details 4. Specifications 5.Attach Battery ６. Assemble Antenna
User Manual 04
Model Name
Regular
Number of channels
Power
Work Mode Analog
5W 0.5W
400
Standard 2000mAh，7.4V
210g
108*52*28(mm)
±2.5ppm
１
２
50Ω
IP54
-30℃ ~ +60℃
Battery
Weight
Size
Frequency Stability
SOS Alarm
Program Key
Antenna Impedance
IP Rating
Working Temperature
Receiving sensitivity
Receive
Squelch sensitivity
Intermodulation
anti-interference
Audio distortion <5%
65dB
<0.2uV
1W
≤380mA
+1 ~ -3dB
≥65dB
<0.20uv(12dB SINAD)
Audio power
Receive current
Audio Response
Clutter resistance
Emission current
Maximum deviation frequency
Stray power
Adjacent channel power
launch Part
≤1.3A
≤5KHz/≤2.5KHz
≤ 7.5uW
≤-65dB
“Click”
Note
Turn off the radio before removing the battery.
If not assembled with battery specified by Company, the radio will give
alarm tone to remind you when powering on. Afterwards, it will operate
normally.
“Spin”
Note
Do not swing the radio when holding it by the antenna, so as to avoid lowering
the performance and shorteningthe life span of the antenna.
The above specifications are tested according to applicable standards. Due to the continuous
development of technology, the above index data is subject to change without notice.
05
NO Icon Name Description
1
2
3
4
5
6
7
8
LED Light
PTT
Side Button 1
Side Button 2
Accessory Jack
SOS button
on the top
Keyboard
Green: RX
Red: TX
Press to Talk
Programable Side button
Programable Side button (Better
use Long press S2 for SOS)
For Headsets, Program Cable
One click on SOS alarm
Multifunction keyboard
Power Knob
RX
136-174MHz
400-470MHz
TX
136-174MHz
400-470MHz
FM Broadcast
76-108MHz
RX
136-174MHz
245-246MHz
TX
136-174MHz
245-246MHz
FM Broadcast
76-108MHz
A36-M7B4UV1 A36-M7B4UV2
Frequency Range
Antenna Type UHF 400-470/136-260 Antenna QT/DQT Frequency deviation 0.7± 0.1KHz/0.4±0.1KHz
Signal-to-noise ratio ≥-45dB/≥-40dB
Modulation sensitivity 8-12mV
Output Power 5W/2W
Turn clockwise to power on and
increase the volume
Turn counterclockwise to power
off the power and decrease the
volume
7. Assembling the Belt Clip 8. LED Indicator 9. Assembling the Accessories 10. Charge the radio
“Click”
Steady Green
Steady Red
Receiving
Transmiting
LED Status Product Status
“Click”
Charging Status
Blinking Red
Blinking Orange
Unchargeable
Rapid Charging
Fully Charged
Charged(90% capacity)
Steady Red
Steady Green
Blinking Green
Waiting to charge.(Either the battery
Voltage is too low or the battery
temperature is to low or too high to
allow charging.When this condition is
corrected,the battery will automatically
begin charging.）
90%
100%
User Manual 06 07
LED
A36
“Click”
A36
User Manual 08
11. Powering On/Off 12. Button Details 14. Side Buttons 15. PTT Button
“Click”
“Click”
On
Off
According to different models and user habits, side buttons can be set to
group/member/friend selection,SOS or to broadcast current groups.
In different interfaces,press PTT button to make group call,single call,
private call.
“Press” “Press”
09
+ -
User Manual 10
16. Multi-Band Portable Transceiver menu description
11
No Secondary menu Setting instructions
SQL
Function function
The lower the squelch level, the easier it is to interfere,the higher the level,
the worse the sensitivity, and the setting should be moderate
0，...，9
STEP
MEMCH
In the frequency mode, press the up and down keys to change the step
value of the frequency
2.50K
5.00K
6.25K
10.00K
12.50K
20.00K
25.00K
30.00K
50.00K
Indicate the channel number to be stored while store channel. If 'CH' in
front of number means this channel already has a channel parameter.
000,...,256
R-CTCSS
R-DCS
None CTCSS
Standard CTCSS. Input standard or nonstandard CTCSS via keypad.
OFF
67.0HZ,...,254.1HZ
D023N,...,D754I
1
2
3
5
6
No Secondary menu Setting instructions
Function function
T-DCS
VOICEPRI
OFF
OFF
D023N,...,D754I
8
9
10
11
13
14
CH-NAME COMMOM NAME LIST
3
Off Battery Saving
TXP
ROGER
30,60,...480s
TOT The number is from 30 to 480s, and the maximum time for PTT
transmission is indicated in 30s steps.
DELCH Delete the channel parameters of the specified channel. If there is no CH-
means that the channel has no parameters and the operation is invalid.
000,...,256
4
OFF
None DCS
Standard DCS
T-CTCSS
7OFF
67.0HZ,...,254.1HZ Standard CTCSS. Input standard or nonstandard CTCSS via keypad.
None CTCSS
None DCS
Standard DCS
Encryption 2
Encryption 1
Encryption 3
Encryption 4
HIGH
LOW
High Power Transmitting
Low Power Transmitting
1
2
12SAVE
OFF
Off Battery Saving
Normal Saving
Super Saving
ON
OFF Turn Off
Turn On
User Manual 12 13
No Secondary menu Setting instructions
Function function
15
16
18
19
20
VOX
W/N
VOICE
LANGUAGE
1,2,...9
NARR
OFF
Turn off VOX function, transmitting without PTT pressing.
ON
ENGLISH
ON
CHINESE
OFF
OFF Turn off operation prompt
English
Chinese
BCL OFF
ONON
In frequency mode, the difference between the transmitting and
receiving frequencies.
No Secondary menu Setting instructions
Function function
23
24
27
28
TO
SC-REV CO
Time scanning, the walkie-talkie pauses scanning when it detects a
signal, and after staying stopped for about 5 seconds, the walkie-talkie
will continue scanning even if the signal is still there.
SE
PF2
Search scanning, the walkie-talkie exits scanning when it detects a signal
and stays at this frequency.
SFT-D
SCAN CTCSS
In frequency mode, turn off the difference between the transmitting and
receiving frequencies.
OFF
-
In frequency mode, the TX frequency=RX frequency plus frequency
difference
In frequency mode, the TX frequency=RX frequency minus frequency
difference
OFF
Activate the sound pressure intensity of voice control, level 1 is the most
sensitive.
WIDE Wide mode
Narrow mode
Turn off voice prompt
Turn on voice prompt
17
BEEP Turn on operation prompt
22OFFSET
21ABR ON
5s,10s,...3min
Background light is always on.
00.000,...,99.995
Time between the background light ON to automatically OFF.
Carrier scanning, the two-way radio pauses scanning when a channel is
detected and keeps it on the same frequency until the signal disappears.
There is a 2 second delay between the disappearance of the signal and
the resumption of scanning to allow time for the response to begin
transmission.
25PF2 LONG PRESS
26PF3
+
User Manual 1415
No Secondary menu Setting instructions
Function function
29
32
33
34
SCAN DCS
POWER ON MSG
S-CODE
ALL
TX
LOGO
VOL TAGE
OFF
BOT
EOT
NUM1…NUM60 No.1---No.50 radio. The radio name of 51-60 can be set
DTMF CODE
Turn off
BOTH
Release PTT to transmitting DTMF
No Secondary menu Setting instructions
Function function
36
37
41
43
OFF
DTMFST
DT-ST
ANI-ST
SCAN ADD
VOX DELAY
RPT-RL
0.5SEC.....2.0SEC
OFF
Due to the delay of the repeater, noise appears when receive instant signal.
No DTMF prompt when press key to transmitting DTMF
ALL
RX Receiving
Transmitting
Photo
Battery voltage
31
ANI NAME
35 AUTOLK
5s,10s,...3min
BOTH
38 TONE
40 MENU EXIT TIME
1,2,3,4,5,…10s
30 CDCSS SAVE
MODE
1,2,3...15
Press PTT to transmitting DTMF
OFF Turn off auto keypad look
Turn on the keypad timing automatic lock function
DT+ANI
DTMF prompt when press key to transmitting DTMF
DTMF prompt when automatically transmitting DTM
DTMF prompt when automatically transmitting DTMF and press key to
transmitting DTMF
1000,1450,1750,2100Hz
39PTT-LT 0,100,…,1000 Delay time before automatic DTMF transmitting
5,10,...60s Control the time of menu automatically exit
42 RP_STE
OFF OFF: Adjust to eliminate the tail. If want to ensure if the repeater is work
or not, set OFF.
1,2,3,4,5,…10s
OFF: Adjust the length of time the tail sound appears, if not needed, set it
to off.
Ce manuel convient aux modèles suivants
1
Table des matières
