Tainet WANpro 2000 Manuel utilisateur

V1.5 07008-00032 2004/03/24

TAINET

WANpro 2000

WAN ACCESS ROUTER

USER'S MANUAL

The Professional Partner

TAINET COMMUNICATION SYSTEM CORP.

Headquarters:

No. 25, Alley 15, Lane 120, Sec. 1. Nei-Hu Rd.,

Taipei 114, Taiwan, R.O.C.

TEL: 886-2-26583000

FAX: 886-2-26583232

Beijing Branch:

3F, A Building, 113 Zhi Chun Lu,

HaiDian District, Beijing, China

Zip Code: 100086

Tel: 86-10-62522081~87

Fax: 86-10-62522077

Printed in Taiwan R.O.C.

Notice

This document is protected by the international copyright law. No part of this

publication may be reproduced by any means without the permission of Tainet

Communication Corporation.

TAINET is a registered trademark, and “WANpro 2000” is a trademark of

Tainet Communication Corporation.

Other product names mentioned in this manual are used for identification

purposes only and may be trademarks or trademarks of their respective

companies.

The information provided from Tainet Communication Corporation is

believed to be accurate. Any changes and enhancements to the product and to

the information thereof will be documented and issued as a new release to this

manual.

FCC NOTICE

This equipment has been tested to comply with limits for a digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in

accordance with instruction manual, may cause harmful interference to

radio communication.

If the equipment does cause harmful interference to radio or television

devices, the user is encouraged to try to correct the interference by one or

more of the following advises:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

The FCC Rule is available from the U.S. government Printing Office,

Washington, DC 20402, Stock NO. 004-00000345-4.

The shielded RS-232 cable is to be used in order to ensure compliance with

FCC Part 15, and it is the responsibility of the user to provide and use

shielded RS-232 cable from NTU to personal computer.

We will not commit to repair this unconditional fault resulting from the user.

The warranty issue will only protect for right operations mentioned in the

manual, and extra charge for this fault might be noticed if necessary.

Any changes of modifications not expressly approved by the grantee

of this device could void the user’s authority to operate the

equipment.

HOW TO USE THIS MANUAL

This section gives you some ideas about how to use this manual effectively.

It includes brief description of the summary chapters and the symbol used

inside the manual.

Summary Chapters

Section Description

Chapter 1 Quick Start.

Describe quick installation for Tainet’s WANpro 2000

device

Chapter 2 Introduction

General introduction to Tainet’s WANpro 2000 device

Chapter 3 Configure and Monitor Via Front Panel

Provide the procedures to setup the user interface and

using LEDs, status to monitor the device via LCD Front

Panel.

Chapter 4 Configure and Monitor Via PCs or Terminals

Provide the procedures to setup the user interface and

using LEDs, status to monitor the device via PCs or

Terminals.

Provide information to view and check the network

conditions.

Appendix A Interface Specifications & Cable Diagrams

Describe the port connectors and interface information.

Appendix B Technical Specifications

Contains physical, electrical and mechanical

specifications.

Glossary Define acronyms and terms used in this manual.

Symbols Have Been Used

There are eight types of the messaging symbols used inside the text. By the

way, users will be warned in conditions during chapters.

The questions from the section

The extra information provided for the user

Stop here to check conditions

Users are prohibit

Break time

How to contact

Warning messages

WARRANTY AND SERVICE INFORMATION

If there is any question, contact your local sales representative,

service representative, or distributor directly for any help needed.

You might use one of the following methods:

nVia the Internet: visit our world wide web site at

http://www.tainet.net

nVia the Sales Representatives:

No. 25, Alley 15, Lane 120, Sec. 1 Nei-Hu Rd., Taipei, Taiwan

TEL: (886) 2-2658-3000 FAX: (886) 2-2658-3232

E-mail: #[email protected]

URL: http://www.tainet.net

Moscow Branch

111024, Shosse Entuziastov, Building 14, Room 425, Moscow, Russia

TEL: (7) 095-7850-377 FAX: (7) 095-7850-378

URL: http://www.tainet.ru

Beijing Branch

3F, A Building, 113 Zhi Chun Lu, HaiDian District , Beijng , China

Zip Code: 100086

TEL: Tel: 86-10-62522081~87 FAX: 86-10-62522077

E-mail: [email protected]

URL: http://www.tainet.com.cn

Guangzhou Representative Office

TEL: (86) 20-8758-5976, 8759-0695 FAX: (86) 20-8758-5976

Shanghai Representative Office

TEL: (86) 21-6487-6066, 6427-0809 FAX: (86) 21-6487-5825

Chengdu Representative Office

TEL: (86) 28-522-4651, 522-4652 FAX: (86) 28-522-4652

CONTENTS

FCC Notice

How to Use This Manual

CHAPTER 1 QUICK START...................................................................1

1.1 How to Begin – the first step for the user.....................................2

1.1.1 Unpacking .........................................................................2

1.1.2 Connecting Power to the Device........................................3

1.1.3 Connecting to the Network ................................................3

1.2 How to Operate and Setup Internet Applications..........................4

1.3 How to Operate and Setup Intranet Applications..........................6

CHAPTER 2 INTRODUCTION...............................................................1

2.1 Tainet’s WANpro 2000................................................................2

2.1.1 Features.............................................................................2

2.1.2 Specifications ....................................................................2

2.2 Applications................................................................................4

CHAPTER 3 Configure and Monitor Via Front Panel............................... 1

3.1 Font Panel ...................................................................................2

3.2 Identify LEDs Light Status..........................................................2

3.3 Rear Panel...................................................................................3

3.4 Front Panel Operation..................................................................3

CHAPTER 4 Configure and Monitor Via PCs or Terminals ...................... 1

4.1 Connect WANpro 2000 to PCs or Terminals................................2

4.2 The ‘Configuration’.....................................................................4

4.3 Main Menu:.................................................................................6

4.4 Configuration Menu ....................................................................6

4.4.1. System...............................................................................7

4.4.2. PPP..................................................................................10

4.4.3 FR....................................................................................11

4.4.4. RIP_Setting .....................................................................12

4.4.5. Routing_Table .................................................................14

4.4.6. Security ...........................................................................17

4.4.7 NAT.................................................................................20

4.4.8 Filter................................................................................23

4.4.9 DHCP..............................................................................26

4.5 Monitor Menu ...........................................................................28

4.5.1 Current_Configuration.....................................................28

4.5.2 Routing_Table .................................................................29

4.5.3 ARP_Table ......................................................................31

4.5.4 Statistics ..........................................................................32

4.5.5 NAT_Buffer.....................................................................35

4.5.6 DHCP..............................................................................36

4.6 Device_Control .........................................................................37

4.6.1 Warm_Start......................................................................37

4.6.2 Restore_Default...............................................................37

4.7 Diagnosis Menu.........................................................................38

4.7.1 Ping.................................................................................38

Appendix A Interface Specifications & Cable Diagrams............................ 1

A1. WAN Interface PinOut List (Female Connectors)........................2

A2. Console Cable RJ-45 – DB-25 Connector PinOut........................3

A3. LAN Interface RJ-45 Connector PinOut......................................3

Appendix B Technical Specifications........................................................ 1

B1 LAN Interface .............................................................................2

B2. WAN Interface ............................................................................2

B3. CONSOLE Interface ...................................................................2

B4. Power..........................................................................................2

Glossary...................................................................................................1

FIGURES

Figure 1.1A Front Panel of the Tainet’s WANpro 2000....................................... 1-2

Figure 1.1B Rear Panel of the Tainet’s WANpro 2000 ........................................ 1-2

Figure 1.2 The Internet Connection over PPP................................................... 1-4

Figure 1.3 The Internet Connection over Frame Relay...................................... 1-5

Figure 1.4 The Intranet Connection over PPP................................................... 1-6

Figure 2.1 Applications to xDSL Series Modem............................................... 2-4

Figure 3.1A Front Panel of the Tainet’s WANpro 2000....................................... 3-2

Figure 3.1B Rear Panel of the Tainet’s WANpro 2000 ........................................ 3-3

Figure 3.2 General Initialized Procedures of the WANpro 2000 Device........... 3-4

Figure 3.3 LCD Menu Tree.............................................................................. 3-6

Figure 4.1 The Console Port Connection to PCs or Terminals .......................... 4-3

Figure 4.2 Main Menu Tree.............................................................................. 4-5

Figure 4.3 Example of WANpro 2000 application............................................ 4-7

Table des matières

Autres manuels Tainet Routeur réseau

Tainet

Tainet WANpro 2000i Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité