Tactacam 5.0 Manuel utilisateur
WWW.TACTACAM.COM
5.0, 5.0 WIDE, 4.0, & SOLO
TACTACAM QUICK START GUIDE
CONGRATULATIONS ON YOUR NEW TACTACAM!
This is a Quick Start Guide to show you the basics of your new Tactacam.
Visit Tactacam.com for the most up-to-date info about your Tactacam.
Please make sure you register your camera within 10 days of purchase at:
https://www.tactacam.com/warranty-registration/
Follow us on Facebook, Instagram and Twitter for the latest updates from the
Tactacam team:
https://www.facebook.com/tactacam
https://www.instagram.com/tactacam
https://twitter.com/tactacam
Submit your videos at https://www.tactacam.com/share/ for a chance to win
some amazing prizes throughout the year.
(844) 482-2822
5.0, 5.0 WIDE, 4.0, & SOLO
GET TO KNOW YOUR TACTACAM
TACTACAM Solo
1. External waterproof mic
2. 2.5 hour record time
on a single charge
3. “Quick change”
Mode/Wi-Fi button
4. One touch record with
vibration indication
5. Battery indicator lights
6. TrueVision™ Full HD
4k-30fps | 2.7k-30fps
1080-120fps
7. TrueVision™ Full HD
2.7k-30fps | 1080-60fps
720p-120fps
8. TrueVision™ Full HD
1080p
8
12
FEATURES
4
TACTACAM 4.0
7
12
TACTACAM 5.0 &5.0 WIDE
6
12
4
3
5
4
3
5
WWW.TACTACAM.COM
5.0, 5.0 WIDE, 4.0, & SOLO
TACTACAM QUICK START GUIDE
Before you start lming, charge your Tactacam completely.
On the rear of the camera unlock the back cap and then twist counter
clockwise to the unlock position to access the rear of the camera.
You should see the following.
SC card slot
USB port (Charging and Downloading)
Removable battery (Up to 2.5 hours continuous recording time)
Mini HDMI output (excludes Solo)
List of the preset modes for your camera (excludes Solo)
Your Tactacam’s serial number.
(Note: Tactacam Solo only has USB port, SD Card slot, and Removable battery.)
12
1
2
5 6
4
3
12
1
2
3
4
5
6
(844) 482-2822
CHARGE YOUR TACTACAM
5.0, 5.0 WIDE, 4.0, & SOLO
With the back cap removed you will see the USB charging port and the SD
Card slot. Using the included USB cord, plug your Tactacam into the included
wall charger.
You will see the solid red light illuminate on your Tactacam and it will remain lit
until your camera is fully charged. When the light has shut off, you can then
unplug your Tactacam.
You can also charge your Tactacam Batteries with the Tactacam Battery
Charger (sold separately).
Mini USB
WWW.TACTACAM.COM
GETTING TO KNOW YOUR TACTACAM
POWERING ON AND RECORDING
1. Push the Rec/Power button. You will
feel the camera vibrate 2 times and see a
blinking green light coming from the
Rec/Power button. The green LED must
be blinking for the camera to be recording.
The process takes approximately 3 seconds.
NOTE: If light does not begin to ash,
make sure your SD Card is installed,
formatted, and not lled with videos.
2. To pause your recording quickly push
the Rec/Power button. The camera will
vibrate 1 time and the green light will go
solid.
3. With the camera paused, change the
camera’s modes by pushing the mode
button. (Excludes Solo)
4. To power your camera completely off
just push and hold the Rec/Power button
for 5 seconds.
5. The camera will automatically power
off to save battery when not recording
(left in pause mode) after 3 minutes.
(844) 482-2822
QUICK CHANGE MODES
GETTING TO KNOW YOUR TACTACAM:
“QUICK CHANGE” VIDEO MODES (excludes Solo)
Three preset video modes:
Green = Standard recording best for rst time use & general
recording.
Blue = Zoom mode to get you even closer to the subject.
Light Blue = Slow motion recording at 120fps provides smooth
playback of your shot placement. Best results with lighted arrow nock
or tracer round ammo.
BLACKOUT MODE (excludes Solo)
To enter Blackout mode press the MODE button when the camera is recording.
NOTE: You can only enter and exit the Blackout mode when the
camera is recording.
When in Blackout mode your camera functions will remain the same
without visible lights on the camera. You will only feel the camera
vibrate. 2 vibrations = recording and 1 vibration = pause. If at any
time you get confused just push and hold the rec/power button for
5 seconds and the camera will power off.
NOTE: When using Blackout mode, periodically conrm you are
in the correct mode (i.e. recording/not recording) to avoid mishap.
The battery indicator light will blink to inform you of the LOW last
5% of the battery when in Blackout mode.
WWW.TACTACAM.COM
CUSTOMIZABLE MODES
TACTACAM 5.0 & 5.0 WIDE
The Camera comes from the factory preset for optimal use in the following 3
settings.
MODE 1 GREEN = 4k @ 30fps
This setting is optimized for general lming and is the mode of choice
for many. Because of the High resolution and lowlight capability’s this
setting is recommended for rst time and experienced users for use
on any weapon. As you familiarize yourself with the Tactacam 5.0 you
will enjoy the exibility to adjust the Tactacam 5.0’s zoom available
when connecting to the camera with the Tactacam APP.
MODE 2 BLUE = 2.7k @ 30fps with 8x Zoom.
This setting is optimized for use when distance is required. To custom-
ize the zoom setting on your Tactacam 5.0 connect to it using the
Tactacam APP and select your desired setting.
MODE 3 LIGHT BLUE = 1080p @ 120 fps
This setting is optimized for high speed action. To customize Mode
3 Light blue connect to your Tactacam 5.0 using the Tactacam APP.
Select your preferred settings and you are ready to start sharing your
hunt.
The following custom mode options are available:
4k = 30fps and Zoom settings 1, 2, 3
2.7k = 30fps and Zoom settings 1, 2, 3
1080p = 120fps, 60fps and 30fps
720 = 240fps, 120fps, 60fps and 30fps
(844) 482-2822
REMOTE CONTROL/ FACEBOOK LIVE
TACTACAM 5.0 & 5.0 WIDE
REMOTE CONTROL: The 5.0 & 5.0 Wide is compatible with the Tactacam
Remote. Please see the Remote User Manual for operation instructions.
FACEBOOK LIVE
Connecting to Facebook Live
1. Using Facebook Live you will need to create an account on
Facebook.
2. In the Tactacam App enter your Facebook account login
information.
3. With your account info entered select stream to Facebook Live to
start sharing your video.
4. You will get a preview in the App of the recording.
NOTE - You will need proper cellular data connection on your
mobile device to stream to Facebook Live.
WWW.TACTACAM.COM
REFORMATTING YOUR CARD
GETTING TO KNOW YOUR TACTACAM
Always use a recommended SD Card for your camera. You will need
a class 10, 32 or 64 GB micro SD Card from your local retailer
Note: You should always format your SD Cards before using in
your Tactacam for the rst time or after it has been installed in any
other device. Only use high quality class 10 or higher micro SD
Cards. Tactacam SD Cards, Lexar, or SanDisk Ultra Extreme are
recommended.
Please see more info on SD Cards at tactacam.com/support
Use one of the following methods to access the video tutorial and full
user manual located on your micro SD Card.
1. Using the provided USB cord connect your Tactacam to
your computer. Power on your camera to allow the computer and
camera to communicate. You will see an icon on your computer
desktop (usually named TACTACAM). Open it and download the
videos and user manual to your computer. Any videos taken with
your Tactacam will be in the “Video” folder.
2. Remove your micro SD Card from your Tactacam and insert
the micro SD Card into the provided micro SD Card adapter.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Tactacam Caméra d'action
