System air RE 1 Manuel utilisateur

1 (2)

User guide RE 1,2 Speed control

Intended use

The product is intended for the speed control of 1–phase fans

in voltage band II.

The product is supplied with special plug and ready for fast

connection to the Essvent S/L fans.

The product is intended for installation in indoor environ-

ments. The product is applicable for ambient temperature of

maximum 40° C.

Document description

This document contains instructions for installation, operation

and maintenance of the product. The procedures must be

done by approved personnel only.

Speak to Systemair for more information on how to install the

product in different installation locations.

Safety instructions

• Obey local conditions and laws.

• Do not install or operate the product if it is defective.

• Disconnect the power supply.

• Make sure that the socket fits the controller’s connector.

• Only use specified equipment.

• Do not exceed the maximum load for the controller.

• The product is not to be used by persons, including chil-

dren, with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction.

• Do not allow children to play with the device.

Transport and storage

Warning

Make sure that the product does not be-

come damaged or wet during transporta-

tion. A damaged or wet product can

cause fire or electric shock.

• Examine the packaging for damages.

• Avoid damage to the packaging or controller when

unpacking

• Keep the original packaging at all times during storage.

• Keep the product in a dry and clean location during stor-

age. Make sure that the ambient temperature during stor-

age is between –10 and +30 °C. A stable ambient

temperature prevents damage from condensation.

• Keep the product in storage for maximum 1 year.

To do before installation

• Examine the packaging for transportation damage and re-

move the packaging from the product carefully.

• Examine the product for damage.

Systemair Sverige AB · Industrivägen 3, SE-739 30 Skinnskatteberg, Sweden

Phone +46 222 440 00

2023-06-19

- 001

2 (2)

• Make sure that the installation location is clean and dry,

for full safety during electrical work.

• Note the maximum ambient temperature for the controller.

To install the product

Install the product with two screws. Screws are not supplied

by Systemair.

Protect the controller with a 10 A fuse for installation using

1,5 mm2conductors, and a 16 A fuse for 2,5 mm2conductors.

Maintenance

The controller is maintenance-free. If the controller has been

accidentally exposed to abnormal levels of liquid, dust or

physical damage, check the function and safety before

operation.

Troubleshooting

One terminal of the input circuit of the controller is protected

by a thermal fuse. Tripped thermal fuse makes the controller

unusable. Replace the controller.

Technical data

Supply voltage: 230 V ±6% 50-60 Hz

Output voltage: 115, 135, 155, 180, 230 V

Enclosure class: IP40

Ambient temperature: Max. 40° C

Manufacturing standard: EN 61 558-1/2-13

Wiring diagram

RE 1,2 – Manual 5-step transformer

N N 230

230

180

115

155

135

A. Thermal fuse

Systemair Sverige AB · Industrivägen 3, SE-739 30 Skinnskatteberg, Sweden

Phone +46 222 440 00

2023-06-19

- 001

Ce manuel convient aux modèles suivants

Autres manuels System air Contrôleurs

System air

System air S-RVAZ4-24A Manuel utilisateur

System air

System air ARGUS-RC-H Manuel utilisateur

System air

System air SYS WSC 86 Mode d'emploi

System air

System air REP 6 Manuel utilisateur

System air

System air MZ3-Touch Manuel utilisateur

System air

System air RETP6 Manuel utilisateur

System air

System air PULSER Manuel utilisateur

System air

System air WC 120G Instructions d'installation

System air

System air RVAZ4-24A Manuel utilisateur

System air

System air TControl EASY 3S Manuel

System air

System air SAVE VTC 500 Manuel utilisateur

System air

System air Topvex VAV Manuel utilisateur

System air

System air REPT6 Manuel utilisateur

System air

System air 145946 Manuel utilisateur

System air

System air PULSER-M Manuel utilisateur

System air

System air E 28 Manuel

System air

System air NOTUS-R Manuel utilisateur

System air

System air CWR-86E Mode d'emploi

System air

System air MTY Manuel utilisateur

System air

System air CORRIGO Manuel utilisateur

System air

System air fantech IPF05-1L Manuel utilisateur

System air

System air TControl POD glass EC Manuel

System air

System air SYSVRF AHU 5HP S Mode d'emploi

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur