SYSMEX XW-100 Manuel utilisateur

XW™-100 AUTOMATED HEMATOLOGY ANALYZER

CLIA WAIVED

START-UP QUICK GUIDE

BEYOND A BETTER BOX™

Code No. AD794857 en-am

PRINTED IN JAPAN

Date of Issue: 11/2017

Document Version: 2.0

Software Version: Ver.1© SYSMEX CORPORATION 2017

X W-100 S TA RT-UP

3. Remove the XW-100 and Power Cord from Box 2.

4. Connect the Power Cord to the XW-100 by inserting it into the socket

in the back.

5. Insert the Power Cord into a 3-prong outlet.

(Continued on next page)

SAFETY WARNINGS:

• The XW-100 weighs approximately 38 lbs.; DO NOT try to lift it

without help.

• Install the instrument with the following clearance, for ventilation:

• At least 6 inches at the front and sides.

• At least 12 inches at the back.

• DO NOT place anything on, bend, kink, or pull the Power Cord.

• Improper grounding of the instrument can cause electrical shock.

• The printer head can get very hot. DO NOT touch! Only use

paper recommended by Sysmex.

Start-up

1. Choose a convenient work space:

• Near an internet connection (provided Ethernet cable is 6.6 feet long) and a 3-prong power outlet

(provided power cord is 6.6 feet long).

• Ensure the space is level, dry, dust-free, and protected from splashing water.

• Avoid installation within 1 foot of devices that may cause potential interference, such as radios, computers,

and wireless devices.

• Environmental conditions:

• Ambient temperature: 15 - 25 oC or 59 - 77 oF

• Relative humidity: 30% - 85%

2. Unpack the XW-100. Ensure that the Start-up Quick Guide is present and perform a parts check on the boxes

that arrive with the analyzer:

Box 1: (open rst)

• Reagent Tray

• Thermal Paper

• Waste Bottle

• Adapters (Green and White)

• Clinician's Quick Guide

• Operator's Quick Guide

• Shutdown Quick Guide

• Technical Specications

Box 2:

• Power Cord

• Ethernet Cable

• Barcode Reader and Cable

• Reagent Tubing

• COIL TUBE SS-10

• Instructions for Use

X W-100 S TA RT-UP

7. Switch the Power button to the "I" position (as opposed to

the "O" position), to turn on the XW-100.

8. Follow the instructions on the

screen to complete the setup; when

requested, insert the Ethernet Cable

plug into the network socket.

9. During Initial Setup, the system will instruct the user to scan the

barcode on the Quick Reference Guide. Use the barcode below to

do so. If the Barcode Reader is working properly, the screen will

react.

664369 10197 8

Start-up, continued from previous page

6. Insert the plug end of the Barcode

Reader cord into the "BR" plug on the

side of the XW-100.

Program availability varies by location. Programs and specification subject to change without notice.

Sysmex America, Inc.

577 Aptakisic Road

Lincolnshire, IL 60069, U.S.A.

Tel. +1 (800) 379-7639

www.sysmex.com/us

Sysmex Corporation

1-5-1 Wakinohama-Kaigandori

Chuo-ku, Kobe 651-0073, Japan

Autres manuels pour XW-100

Autres manuels SYSMEX Instrument de mesure

SYSMEX

SYSMEX CyFlow Cube 6 V2m Manuel utilisateur

SYSMEX

SYSMEX SF-3000 Manuel utilisateur

SYSMEX

SYSMEX CyFlow Ploidy Analyser Manuel utilisateur

SYSMEX

SYSMEX XW-100 Manuel utilisateur

SYSMEX

SYSMEX CyFlow Space Manuel utilisateur

SYSMEX

SYSMEX CyFlow Ploidy Analyser Manuel utilisateur

SYSMEX

SYSMEX XE-5000 Manuel utilisateur

SYSMEX

SYSMEX pocH-100i Manuel utilisateur

SYSMEX

SYSMEX XW-100 Manuel

SYSMEX

SYSMEX CyStain VitalCount Manuel utilisateur

SYSMEX

SYSMEX BK265455 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur