Synology RT1900ac Manuel utilisateur
Synology Router RT1900ac
User’s Guide
Table of Contents
Chapter 1: Meet Your Synology Router
Package Contents 4
Synology Router at a Glance 5
Safety Instructions 6
Chapter 2: Set up Your Synology Router
Install Antennas 7
Position Your Synology Router 8
Start up Your Synology Router 9
Connect to Your Synology Router 10
Set up Synology Router Manager (SRM) 11
Chapter 3: Choose the Operation Mode
The Wireless Router 15
The Wireless AP (Access Point) 15
The Wireless Client 16
Chapter 4: Set up Your Wi-Fi Connection
Create Wi-Fi Networks (2.4GHz & 5GHz) 17
Create Guest Wi-Fi Networks (2.4GHz & 5GHz) 17
Create WPS Networks (2.4GHz & 5GHz) 18
Chapter 5: Manage Client Devices
Monitor Device Status 19
Apply Parental Control 19
Apply Trafc Control 20
Apply Wake-On-LAN 20
Chapter 6: Enhance Connection Security
Secure Your Connections 21
Create Firewall Rules 22
Enforce Auto Block 22
Create Certicates 22
Use More Security Measures 22
Chapter 7: Update and Restore Your Synology Router
Update SRM and Packages 23
Back up and Restore SRM 23
Reset Synology Router 24
Register Synology Account 24
2
3
Chapter 8: Manage Internet Connection
Internet Connection Types 25
ISP/VPN/IPv6 Settings 25
QuickConnect & DDNS 25
DMZ 26
Port Forwarding 26
Port Triggering 26
IPv6 Tunneling 26
Chapter 9: Manage Local Network Connection
Set up an IPv6 Router 27
Set up DHCP Services 27
Set up Static Routes 27
Chapter 10: Manage External Devices and Privileges
Install & Manage USB/SD Storage 28
Dene User/Folder Privileges 28
Install & Manage Network Printers 28
Install & Manage 3G/4G Dongles 28
Chapter 11: Discover SRM Packages
DNS Server 29
Download Station 29
Media Server 29
RADIUS Server 29
VPN Server 29
Chapter 12: Discover Synology Mobile Applications
DS router 30
Other Synology Mobile Applications 30
Chapter 13: Diagnosis Tools
Check Connection Status 31
Check Notications 31
Diagnose with Ping 31
Diagnose with Traceroute 31
Find Technical Support 31
Chapter 14: FAQ
SRM Operation 32
Network 33
Wi-Fi 35
Appendix A: Specications
Appendix B: LED Indicator Table
Syno_UsersGuide_RouterRT1900ac_20150923
4Chapter 1: Meet Your Synology Router
Thank you for purchasing this Synology product! Before setting up your new Synology Router, please check
the package contents to verify that you have received all of the items below. Also, make sure to read the safety
instructions carefully to avoid harming yourself or damaging your Synology Router.
Note: All images below are for illustrative purposes only, and may differ from the actual product.
Package Contents
Main unit x 1 AC power adapter x 1
RJ-45 LAN cable x 1
Stand kit x 1
Antenna x 3
Meet Your Synology Router 1
Chapter
4
5Chapter 1: Meet Your Synology Router
Synology Router at a Glance
No. Article Name Location Description
1 Antenna Base
Rear Panel
Install the included antennas here.
2 Power Button Press to power on/off the Synology Router.
3 Power Port Connect the AC power adapter here.
4 WAN Port Connect a network cable from the ISP modem into this port to establish
WAN connection.
5 LAN Port Connect network cables into these ports to establish LAN connection.
6 RESET Button Bottom Panel Press and hold for four seconds (Soft Reset) or for ten seconds (Hard
Reset). For more information, see "Reset Synology Router".
7 STATUS Indicator
Front Panel
Displays the status of the system.
8 2.4G Wi-Fi Indicator Displays the status of 2.4G Wi-Fi connection.
9 5G Wi-Fi Indicator Displays the status of 5G Wi-Fi connection.
10 WAN Indicator Displays the status of WAN connection.
11 LAN Indicator Displays the status of LAN connection.
12 Eject Button 1. Press to eject USB/SD external storages.
2. Displays the status of USB/SD external storages.
13 WPS Button
Left Panel
Press to start WPS.
14 Wi-Fi Switch Switch to turn on/off the Wi-Fi network.
15 USB 3.0 Port
Right Panel
Connect an external drive, USB printer, or other types of USB devices
here. For more information, see "Manage External Devices and Privileges".
16 SD Card Slot Insert the SD card here.
Note: For LED indicator information, please refer to "Appendix B: LED Indicator Table".
6Chapter 1: Meet Your Synology Router
Safety Instructions
Keep away from direct sunlight and away from chemicals. Make sure the environment does not
experience abrupt changes in temperature or humidity.
Place the product right side up at all times.
Do not place near any liquids.
Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or
aerosol cleaners.
To prevent the unit from falling over, do not place on carts or any unstable surfaces.
The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is
correct and stable.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.
7Chapter 2: Set up Your Synology Router
Install Antennas
1 Point the antenna at the antenna base.
2 Turn clockwise until the antenna is secured.
3 Repeat Steps 1 and 2 to install the other two antennas. For optimal Wi-Fi performance, tilt the antennas so that
they are 45 degrees apart from each other.
Set up Your Synology Router 2
Chapter
7
8Chapter 2: Set up Your Synology Router
Position Your Synology Router
For optimal performance, it is recommended to position the Synology Router as advised below:
• On a stable surface (e.g. an elevated shelf) from any possible physical interruptions during use
• Close to the center of the area where the wired/wireless client devices are placed, and within a visible distance
from the wireless devices
• In a position where few walls and ceilings are between your Synology Router and its client devices
• Away from any potential electrical signal sources, such as other Wi-Fi routers, 3G/4G bases, and microwave
ovens.
• Away from large expanses of metal or other materials, such as metal doors, glass panels, and concrete.
Your Synology Router can be set in any of the following positions.
Place Flat on a Surface
Simply place the Synology Router at on a horizontal, stable surface.
Stand Upright with the Stand Kit
To place your Synology Router upright for better ventilation and space maximization, please follow the steps
below:
1 Join the stand kit to the holes on the bottom shell of your Synology Router.
2 Apply even, rm pressure to push the stand kit upward until it is secured.
3 Place the kit-attached Synology Router on a horizontal, stable surface.
9Chapter 2: Set up Your Synology Router
Start up Your Synology Router
1 Push the button on the adapter provided in the package and pull out the plug case as illustrated below.
2 Slide the plug adapter provided into the slots by pushing it downward. Note that the plug adapter that comes
with your Synology Router varies depending on your region. The image below is for reference only.
10 Chapter 2: Set up Your Synology Router
Connect to Your Synology Router
1 Use the included network cable to connect your Synology Router (at the WAN port) to the ISP modem.
2 Connect one end of the power adapter to the power port on your Synology Router, and the other end to
the power outlet. Press the power button to power on your Synology Router. Wait for up to two minutes until
the STATUS and WAN LED indicators turn green.
3 Connect wired/wireless client devices to your Synology Router:
• For wired devices: Use network cables to connect devices to the LAN ports. The corresponding LAN LED
indicators should turn orange/green to indicate successful connection.
• For wireless devices:
1 Turn on the Wi-Fi switch on the Synology Router, and wait until the 2.4G/5G LED indicators turn static
green to indicate it is ready to connect to other devices.
2 Use your wireless device to scan and join the Wi-Fi network created by your Synology Router.
Note:
Below are the default credentials for the Wi-Fi network:
1. Wi-Fi SSID: SynologyRouter
2. Password: synology
The default credentials can be changed during the initial SRM setup.
Autres manuels pour RT1900ac
1
Table des matières
Autres manuels Synology Routeur réseau
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité