Synergy Global Technology Combo DB-15 ip 2-console KVM Manuel utilisateur
LCDK1020 / 1021
LCDK1038 / 1039
LCDK1024 / 1025
User Manual
Combo DB-15
2-console KVM
Combo DB-15 KVM
Combo DB-15
2-console KVM
www.RackmountMart.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
www.RackmountMart.com
3.1 Package contents
3.2 KVM port connection
3.3 KVM Cascade
3.4 Specifications
2.1 Package contents
2.2 KVM port connection
2.3 Remote & Local console connection
2.4 KVM Cascade
2.5 Specifications
1.1 Package contents
1.2 KVM port connection
1.3 IP & Local console connection
1.4 IP console setting
1.5 KVM Cascade
1.6 Specifications
Contents
4.1 KVM Button
4.2 Password
4.3 KVM OSD
4.4 KVM Hotkey & Remote Console Hotkey
4.5 DC power 12V, 24V, 48V Input
< Part 1 > Combo DB-15 2-console KVM
< Part 2 > Combo DB-15 2-console KVM
P. 1
P. 2
P. 2
P. 3
P. 4
P. 5
P. 6
P. 7
P.7 - 8
P. 9
P.10
P.15
P.16
P.17
P.18
P.19
< Part 4 > Usage
< Part 3 > Combo DB-15 KVM
P. 11
P
.12
P.13
P.14
www.RackmountMart.com
LCDK1020 / 1021
LCDK1024 / 1025
LCDK1038 / 1039
AB
Figure 1.
■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
Installation for standalone KVM
■Install each bracket using screws
provided shown in Figure 1.
M3.2 x 4.5 mm M4 x 10 mm
■Fix the KVM into the rack
Screw A: 2 pcs Screw B: 8 pcs
www.RackmountMart.com
KVM unit
• Mounting set w/ bracket & screws x 1
• Power adapter w/ power cord ( for KVM ) x 1
P. 1
< 1.1 > Package Contents Combo DB-15 IP KVM
< Part 1 > Combo DB-15 KVM
Local Console
Power Cascade
www.RackmountMart.com
LCDK1038 / 1039
• LCDK1038 or LCDK1039 KVM unit x 1
LCDK1038
LCDK1039
■6 / 10 / 15 ft Combo KVM cable
■Support PS/2 or USB server
< 1.2 > KVM port connection
P. 2
< 1.3 > IP & Local console connection
Combo DB-15 IP KVM
DB-15 Combo KVM port
USB Servers
PS/2 Servers support PS/2 or USB server
www.RackmountMart.com
LCD-A3001 / 3002 / 3003
LCD-A3001 / 3002 / 3003 Combo KVM cable
After the cable connection, please take the following steps to configure the IP KVM :
1. Download IPKVMsetup.exe from the link:
2. Double click IPKVMsetup.exe to configure the IP KVM by device setup as below.
< 1.4 > IP console setting
- http://192.168.1.22
11. Open Internet Explorer ( I.E. ), version 6.0 or above
12. Enter the IP KVM address into the address bar
- For Single IP - http://192.168.1.22
13. Enter username ( default is super )
Password ( default is pass )
14. After successful login to IP KVM, the user will enter the main page of IP KVM
The setting is enough for intranet.
If the users access KVM GUI via internet, please ask MIS for assistance and
download IP KVM user manual from the link :
3. Click Refresh Device to search the connected IP KVM
4. Select the M.A.C. address, which you want to setup, then click Query Device
5. Enter Super user login. The default is super
6. Enter Super user password. The default is pass
7. Enter the new super user password
8. Re-enter the new password
9. Change the desired IP address / Subnet mask / Gateway, then click Setup Device to confirm the setting to IP KVM
10. The default address is as below:--
■The single IP KVM model, such as IP-1602
P. 3
Combo DB-15 IP KVM
www.RackmountMart.com
http://www.rackmountmart.com/downloads.html
http://www.rackmountmart.com/downloads.html
< 1.5 > KVM Cascade
■Cascade up to 8 levels, 128 servers
■
When multiple combo DB-15 KVMs cascade together, the master KVM at level 1 will take all control
of other slave KVM switches (e.g. level 2 to 8).
Master KVM
Slave KVM
level 2
Slave KVM
level 8
Slave KVM
level 7
Slave KVM
level 6
Slave KVM
level 5
Slave KVM
level 4
Slave KVM
level 3
P. 4
■6ft Combo KVM cascade cable
To console VGA port
Combo DB-15 IP KVM
www.RackmountMart.com
Cascading multiple KVM with LCD-A1019 cascade cable.
LCDK1020
LCDK1020
LCDK1020
LCDK1020
LCDK1021
LCDK1021
LCDK1021
Cascaded KVMs from level 2 to 8 must be the models of LCDK1020 / 1021.
LCD-A1019
< 1.6 > Specifications
P. 5
▀KVM Port
Number of ports: 8 or 16
Connector: DB-15 combo connector
Connectivity: Combo 4-in-1 KVM cable, up to 6, 10 & 15 feet
▀Local Console
Graphic connector: 1 x DB-15 VGA
Resolution: Up to 1920 x 1080 / 1920 x 1200
Input device: 2 x USB type A for keyboard & mouse
▀IP Remote Console
Connector: RJ45 Ethernet
User management: 15-user login, 1 x active user
Network protocol: DHCP / BOOTP / DNS
Security: SSL v3, RSA, AES, HTTP / HTTPs, CSR
Resolution: Up to 1600 x 1200
Browser: IE, Firefox, Safari, Netscape
▀Expansion: Up to 128 servers by 8-level cascade
▀Compatibility
Multi-platform: Mix PCs, SUN and Mac G3 / G4 Mac / iMac
Support: Windows 7 / Vista / 2003 / XP, Linux, Unix
▀Power
Input: Auto sensing 100 to 240VAC, 50 / 60 Hz
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt
▀Regulatory
Safety: cUL, FCC & CE certified
Environment: RoHS2 & REACH compliant
▀Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
▀Product Information
Dimension (W x D x H): 443 x 171 x 44 mm / 17.4 x 6.7 x 1.73 inch
Net weight: 2.3 kg / 5.1 lb ( IP-802 ) 2.5 kg / 5.5 lb ( IP-1602 )
Combo DB-15 IP KVM
www.RackmountMart.com
LCDK 1038 / 1039
Ce manuel convient aux modèles suivants
8
Table des matières
Autres manuels Synergy Global Technology Changer
Synergy Global Technology
Synergy Global Technology LCDK1010 Manuel utilisateur
Synergy Global Technology
Synergy Global Technology LCDK2012-31 Manuel utilisateur
Synergy Global Technology
Synergy Global Technology LCDK1022 Manuel utilisateur
Synergy Global Technology
Synergy Global Technology LCDK2010-31 Manuel utilisateur
Synergy Global Technology
Synergy Global Technology LCDK3001 Manuel utilisateur
Synergy Global Technology
Synergy Global Technology LCDK 1070 Manuel utilisateur
Synergy Global Technology
Synergy Global Technology LCDK1023 Manuel utilisateur
