Synergy Global Technology ID-E17Aw Manuel utilisateur

Toll Free: 1-888-865-6888

Tel: 510-226-8368 Fax: 510-226-8968

Email: [email protected]

User Manual

ID-E17AwN

Aluminum front bezel

ID-E17Pw

Universal Mounting Open Frame

ID-E17Aw

16.2” High Resolution 1920 x 1200 LCD

Front NEMA4 / IP65

Aluminum front cover

ID-E17Dw

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness

of the contents. The information in this document is subject to change without notice. We are not liable for any injury or

loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for

future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, ﬁre or electrical shock.

■Only qualiﬁed service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualiﬁed service personnel.

What the warranty does not cover

■Any product, on which the serial number has been defaced, modiﬁed or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, ﬁre, water, lightning, or other acts of nature, unauthorized product modiﬁcation, or

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power ﬂuctuation or failure.

□Use of supplies or parts not meeting our speciﬁcations.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

Any changes or modiﬁcations made to this equipment may void the user’s authority to operate this equipment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

www.RackmountMart.com

< Part. 5 > Options

5.1 Option Table

5.2 3G / HD / SD-SDI Broadcast-grade input

5.3 MC Multi-display control solution

5.4 Resistive / Capacitive ( 1-point touch )

5.5 DC Power : 12V / 24V / 48V / 125V / 250V

5.6 MIL-type or lockable connector

P.21

P.22

P.23

P.24 - 25

P.26

P.27

< Part. 4 > Speciﬁcations / OSD / Remote Controller

4.1 Product Speciﬁcations

4.2 On-screen Display Operation ( OSD )

4.3 Picture In Picture ( PIP ) / Picture By Picture ( PBP )

4.4 Remote Controller

P.14 - 15

P.16 - 17

P.18 - 19

P.20

< Part. 1 >

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Mounting Hardware & Installation

Contents

P. 1

P.2 - 3

P.4 - 5

< Part. 3 > ID-E17Pw

3.1 Package Content

3.2 Structure Diagram & Dimension

3.3 Mounting Hardware & Installation

www.RackmountMart.com

ID-E17Aw / ID-E17AwN

P. 6

P.7 - 8

P.9

< Part. 2 >

2.1 Package Content

2.2 Structure Diagram & Dimension

2.3 Mounting Hardware & Installation

ID-E17Dw

P.10

P.11 - 12

P.13

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made speciﬁcally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the ﬁnish.

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microﬁber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microﬁber cloth.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your

microﬁber cloth ﬁrst, not directly on the parts you are cleaning.

www.RackmountMart.com

- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio

- On-chip Faroudja® DCDi Cinema processing

Audio

Power

out - in - in

Video PC

VGADVI-D

HDMI

S-VideoBNC

Basic I/O

Mounting hardware X 1 pack

- Mounting bracket x 4 pcs

- M4* 6mm screw x 8 pcs

- M4* 50mm screw x 8 pcs

16.2” High Resolution LCD display X 1

6ft VGA cable X 1

Power cord X 1

Remote controller X 1

< Part 1 >

P. 1

www.RackmountMart.com

< 1.1 > Package Content - ID-E17Aw / ID-E17AwN

Rear case

LCD panel

6mm aluminum front bazel

Audio speaker, pair

LCD membrane

Remote sensor

3Front view

Rear view

P. 2

Model

Product Dimension

(W x D x H)

Net

Weight

468.5 x 57.1 x 331 mm

18.4 x 2.2 x 13 inch

4.9 kg

10.8 lbs

ID-E17Aw

ID-E17AwN

www.RackmountMart.com

< 1.2 > Structure Diagram - ID-E17Aw / ID-E17AwN

P. 3

Front View Side View

Rear View

UNIT : mm

1mm = 0.03937 inch

Bottom View

www.RackmountMart.com

< 1.2 > Dimension - ID-E17Aw / ID-E17AwN

■Install 4 mounting brackets with 8 x M4*6mm screws

■Adjust the LCD panel with 8 x M4*50mm screws and ﬁx it on the surface.

Steps

P. 4

x 4 pcs

Mounting

bracket x 8 pcs

M4*6mm screw

2 3

x 8 pcs

M4*50mm screw

www.RackmountMart.com

< 1.3 > Panel Mount Installation - ID-E17Aw / ID-E17AwN

■Hardware and M4*4 pcs for VESA mount are not provided

VESA mount ( 100*100mm )

M4 screw

P. 5

www.RackmountMart.com

< 1.3 > VESA mount Installation - ID-E17Aw / ID-=E17AwN

Autres manuels pour ID-E17Aw

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Synergy Global Technology Moniteur

Synergy Global Technology

Synergy Global Technology ID-E27Aw Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-08A Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-55AW Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-K17Aw Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-E24Aw Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDR7U17-02 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-06A Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDR8U19-09 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-2-E17Aw Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDR6U17-02 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDR7U19-02 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDR9U20-02 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-19W Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-47Aw-LED Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDR8U21-04 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-10A Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDR6U17-03 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-H17A Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCDR8U20-09 Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-E30Aw Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-20A Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-HE21AwN Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-19D Manuel utilisateur

Synergy Global Technology

Synergy Global Technology ID-E17Aw Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation