Symmetry EN-7520 Manuel utilisateur
Symmetry EN-7520
Installation Guide
INFORMATION TO USER
CAUTION
RISK OF ELECTRIC SHOCK,
DO NOT OPEN
!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product‟s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
!
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
Symmetry EN-7500 Series EN-7520 Installation Guide
9600-0543 Issue 1.1 Page 3 of 17
Table of Contents
1. FEATURES........................................................................................................ 4
2. PACKAGE CONTENTS.................................................................................... 5
3. PART NAMES.................................................................................................... 6
4. INSTALLATION................................................................................................. 7
4.1. Installation Template...................................................................................................... 8
4.2. Manual adjustment for 3-axis movements.................................................................. 8
4.3. Lens Focus Adjustment................................................................................................. 9
4.4. Setting the Image Attribute............................................................................................ 9
5. CONNECTIONS............................................................................................... 10
6. CONFIGURATION........................................................................................... 11
6.1.Set up network environment ........................................................................................ 11
6.2.View video on web page............................................................................................... 11
6.2.1.View video using IPAdmin Tool............................................................................ 11
6.2.2.View video using IP address................................................................................. 14
6.3. Reset............................................................................................................................... 14
6.4. Factory Default.............................................................................................................. 14
APPENDIX A: SPECIFICATIONS ...................................................................... 15
Summary................................................................................................................................ 15
Electrical Characteristics..................................................................................................... 16
Environment Condition........................................................................................................ 16
Analytics................................................................................................................................. 16
APPENDIX B: DIMENSIONS.............................................................................. 17
Symmetry EN-7500 Series EN-7520 Installation Guide
9600-0543 Issue 1.1 Page 4 of 17
1. FEATURES
Camera
Indoor Fixed Mini Dome IP Camera
High Quality Compression in real time streaming
1/4” VGA CMOS
Streaming
Dual streaming mode (with different codec/resolution/bit rate etc.)
De-interlacing on DSP
Burnt-in text supported
Unicast/Multicast supported
Video/Audio
Video compression: H.264/MPEG4/MJPEG (30FPS@D1)
Audio compression: G.711(µLaw, aLaw)/PCM
Video Motion Detection supported
2-way mono audio supported
Network
RTSP/ HTTP protocol supported
10/100 Base-T Ethernet
Additional Features
Built-in Video Analytics
OSD supported
Analytics
Intelligent Detection (Included as standard)
VCA (Optional)
Symmetry EN-7500 Series EN-7520 Installation Guide
9600-0543 Issue 1.1 Page 5 of 17
2. PACKAGE CONTENTS
Unpack carefully and handle the equipment with care. The packaging contains:
Camera
DC power adaptor
Extension cable
(for LAN, power connector, and audio )
Quick Installation Guide
Installation Template
Screws and Anchor block
Hex wrench driver
Note
i
The above contents are subject to change without prior notice.
Symmetry EN-7500 Series EN-7520 Installation Guide
9600-0543 Issue 1.1 Page 6 of 17
3. PART NAMES
①LAN Connector (Ethernet)
This is a RJ45 LAN connector for 10/100 Base-T Ethernet.
②Audio in / out Cable
The camera has a mono audio input and a mono audio output.
③Power Adaptor Connector (DC 12V)
The camera requires a DC 12V 1A adapter for power supply.
①
②
③
* Models herein and their
appearance are subject to change
without any prior notice.
Symmetry EN-7500 Series EN-7520 Installation Guide
9600-0543 Issue 1.1 Page 7 of 17
4. INSTALLATION
Note
i
When assembling the main body of the camera and its dome cover,
make sure they fit each other into place.
Caution
!
The camera may fall off the ceiling even after the proper installation and
mounting. To prevent any accident, make sure the ceiling is firm and
stable enough to support the camera. If any reinforcement is needed,
consult with your safety personnel and proceed with the installation.
1) Connect the LAN cable and
power supply cable to the camera.
2) Place the installation template on
the ceiling.
3) Drill two holes on the template
and insert anchor blocks into the
holes. Fasten the camera with
screws.
4) Put the dome cover on the main
body of the camera. Make sure the
main body and the cover fit each
other into place.
Symmetry EN-7500 Series EN-7520 Installation Guide
9600-0543 Issue 1.1 Page 8 of 17
4.1. Installation Template
4.2. Manual adjustment for 3-axis movements
After installation, manually adjust the inner mechanism. Perform 3-axis movements
manually by turning the inner mechanism as shown above, and check that it moves
correctly. After adjustment, fasten the screw on the rotation axis.
68.5
Ø125
Ø30
2-Ø6
Symmetry EN-7500 Series EN-7520 Installation Guide
9600-0543 Issue 1.1 Page 9 of 17
4.3. Lens Focus Adjustment
4.4. Setting the Image Attribute
You can set the image attribute of camera through the webpage.
The menu of image attribute can be seen under Setup > Video & Audio > Video-in >
Attribute Setting. Brightness, contrast, hue, saturation and sharpness can be adjusted.
1) Open the dome cover from the
device.
2) Uncover the latch (C) carefully to
remove the lens cover.
3) Rotate the lens focus ring (D) to
adjust the focus and fasten the
screw (E) using the included hex
wrench.
4) Push the lens cover to the module
until the latch (C) clicks into
position.
5) Attach the dome cover by aligning
protrusion on the body (B) with the
inverted triangle mark of the dome
cover (A). Turn the dome cover
clockwise to lock.
6)
A
A
C
* Models herein and their appearance are subject to change without any prior notice.
D
E
Symmetry EN-7500 Series EN-7520 Installation Guide
9600-0543 Issue 1.1 Page 10 of 17
5. CONNECTIONS
Caution
!
Make sure the polarity is correct. Incorrect connection may cause
malfunction or damage to the IP device.
Caution
!
Power Adaptor Connector (DC 12V)
LAN
DC 12V
B
Table des matières
Autres manuels Symmetry Caméra de sécurité
