Swift Hitch SH02 Manuel utilisateur
Model: SH0
Please read this manual carefully and thoroughly before any attempt to
install and operate this product and retain it for your future reference.
User's Manual
Swift HitchTM
English
Portable Wireless Camera System
with Infrared Night Vision
2
TABLE OF CONTENTS
INTRODUCTION 1~3
Notice
Restrictions
Maintenance
Warranty
Approval Information
1
3
3
2
1
EU Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling
advice.
PRODUCT 4~5
Package Contents
Feature Locations
4
5
SPECIFICATIONS 9
TROUBLESHOOTING 10
FIRST TIME USAGE 6~8
Using the Camera 7~8
8
Night Vision
6~7
Charging the Camera and Receiver
INTRODUCTION
Thank you for your interest and support in our product and purchasing
this wireless camera kit. This product
eel confident that you will be pleased with the quality and features of
this product. The camera features one CMOS image sensor and a
transmitting module to capture the image and transmit them wirelessly.
The receiver features a receiving module to receive and display the
camera image on a color (LCD) - liquid crystal display.
works at ISM-2.4GHz frequency
band, which could be legally used worldwide without permission. We
f
This product has a one year limited warranty with an affective date
that begins the date of purchase. Refer to the troubleshooting guide at
the end of this manual for help. Contact the phone number provided in
that section for any additional support. Please retain proof of purchase
receipt for verification. Any attempted disassembly of the product will
void the warranty. Do not return defective product to the retailer.
Notice
Warranty
Notice: This product may cause interferences with other wireless
equipment that operates at 2.4GHz ISM band. Please turn off one of
the equipments to eliminate the interference.
Product Assurance: This camera will emit electromagnetic wave,
just like other wireless products. But its transmitting power is less than
other wireless products such as mobile phones. The 2.4GHz wireless
camera meets wireless frequency security standards and recommended
indexes while working. These standards and indexes are certificated
by academic organization and represent the cogitative research of the
scientific workers who continuously explore and annotate the involved
fields. So we believe that our products are safe for customers.
1
1
2
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation Changes and
modification not expressly approved by the manufacturer or registrant
of this equipment can void your authority to operate this equipment
under Federal Communications Commissions rules.
All our products meet the requirements of approval FCC , and are
granted the FCC certification. They are authorized to bear FCC mark.
Approval Information
FCC
1. DO NOT use this product to violate one's privacy. Monitoring one's
activities without consent is illegal and this product is not designed
and manufactured for such purpose;
2. DO NOT put this product near any medical equipment. Radio
waves might potentially cause breakdown of electrical medical
equipment. So this product should be placed at least 1 foot away
from any heart pacemaker. Radio waves might potentially
influence heart pacemaker and lead to respiratory disturbance;
3. DO NOT use this product for any illegal activities. We shall not be
responsible for any consequences of illegal acts committed by the
user.
Restrictions
1. Do not shake or strike the product;
2. Keep it dry and dustless and avoid exposing it to direct sunlight;
3. Do not place product near any magnetic objects;
4. Avoid putting the product in places where the constantly changed
temperature or humidity occurs;
5. Keep product away from heat sources such as electric heater;
6. Do not use the camera near aggressive chemicals;
7. Do not use this camera near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near
a swimming pool and the like;
8. Do not use the camera in the places which are enclosed by metal.
The surrounding metal like lifter, cabin, may shield the
electromagnetic wave, and result in failure of signal reception;
9. Please obey the local government's environment protection policy;
10. Please turn off the power when left unused;
11. Do not disassemble or repair the camera or receiver; doing so might
cause damages to the product. And also VOID THE WARRANTY.
Maintenance
3
PRODUCT
Package Contents
This package comes with the following items. Please check whether
they are all included in the packaging box, if one or some is missing,
contact the retailer for replacement.
4
①
④ ⑤ ⑥
⑦
② ③
①
②
③
④
⑤
⑥
⑦'s Manual
2.4GHz Wireless Camera×1
2.4GHz Wireless Receiver×1
Lithium Battery for Receiver ×1
"Y" shaped Charging cable for
camera & receiver ×1
Carrying Bag for camera ×1
Carrying Bag for Receiver ×1
User ×1
Lens
Antenna
Weatherproof
cover
Infrared
Lights
Magnetic
stand
Power Jack
LED
Power ON/OFF
Feature Locations
1. Camera
2. Receiver
5
Power ON/OFF
LED
LCD
Battery Cover
Charge Socket
Charge Socket (available only by base charging,
and the base is optional)
2. Connect the camera/receiver with auto cigarette lighter by the "Y"
shaped charging cable. Your camera and receiver are being
charged. A full charge will take about 2 hours for camera and 2.5
hours for receiver.
FIRST TIME USAGE
6
Charging the Camera and Receiver
Camera
Receiver
Auto cigarette lighter
1. Load a Li-battery to the battery compartment with its polarities matched.
Note: Make the contacts contacting first and then put the other end of the battery
in the compartment.
Note: For camera, you need to remove the cover before charging.
7
Notes for receiver:
A full charge will take about 2.5 hours, which can power the receiver for about
180 minutes continuously.
You are recommended to have the battery fully charged before its first
installation to optimize its life.
Do not burn or disassemble the Li-battery.
Do not short-circuit the battery as it may cause fire or electric shock.
CAMERA LED INDICATOR
Red on
Off
Green on
Yellow on
STATUS
Charging when Power off
Power off (disconnect with cigarette lighter)/Finish Charging
Power on
Charging when Power on
RECEIVER LED INDICATOR
Red on
Off
Green on
Yellow on
Flash green
STATUS
Charging when Power off
Power off (disconnect with cigarette lighter)/ Finish Charging
Power on
Charging when Power on
Low battery
If the battery is exhausted, please recharge it with the charging cable.
Cover the back with weatherproof cover in rainy day if necessary.
Notes for camera:
Using the Camera
1. Before using, make sure the camera is full charged. Press the Power
ON/OFF button to power on your camera.
3. The camera/receiver can work during charging. Press the Power ON
/OFF button to power on the camera/receiver, then you can use it.
Camera Receiver
8
Night Vision
The built-in Infra-red lights in camera provide night vision for low light
conditions. The Infra-red lights will be automatically activated at night.
The picture will turn to Black & White (monochrome) in Night Vision
status.
Built-in IR lights for about
15ft Night Vision Range
2. Mount the Magnetic Camera on your tailgate. Then adjust it to a
suitable angle from your receiver.
3. View yourself backing up on the display. Hitch your ride.
Autres manuels Swift Hitch Appareil photo numérique
