SWEEX ST031V2 - QUICK_START_GUIDE Manuel utilisateur

English version

ST031 Sweex External 3.5" SATA Storage Solution USB 2.0

Introduction

In order to fully enjoy the Sweex External 3.5" Storage Solution, it is important to observe a number of things:

• Do not expose the Sweex External 3.5" Storage Solution to extreme temperatures. Do not place the device in direct sunlight or in the direct

vicinity of heating elements.

• Do not use the Sweex External 3.5" Storage Solution in extremely dusty or moist surroundings.

• Protect the device against powerful shocks or jolts - they may damage the internal electronics.

Hardware installation of the hard disk

1. Push the tabs on the side of the casing inwards in order to remove the top.

2. Tighten to secure the hard disk.

3. Connect the IDE cable and power supply plug to the hard disk.

4. Close the casing by clicking the tabs back into place. The hard disk has now been built in.

Connecting the Sweex External 3.5" Storage Solution SATA USB 2.0

1. Start up the computer and wait until Windows has started up fully.

2. Connect the USB cable to the Sweex External 3.5" Storage Solution and to a free USB port on the computer.

3. Connect the external power adaptor and plug it into the mains socket. Windows will detect and install the hard disk automatically.

4. Click on “My Computer” (My Computer) to access the new hard disk.

Activating a hard disk by initiating and formatting under Windows 2000, Windows XP, Windows Vista

If a new hard disk does not show up under “My Computer” (My Computer), it has probably not been formatted yet. This is often the case with

new hard disks.

English version

1. Go to the “Control Panel” (Control Panel) and then go to “Administrative Tools” (Administrative Tools).

2. Go to “Computer management” (Computer management) and “Disk Management” (Disk management).

3. A window to start up the procedure to format the disk will automatically appear. If it does not, right-click the new disk in the window. Please be

aware that your new disk may have a number that is different from the one in the picture.

4. Right-click in the grey area on the left to initialise the disk. If this is not required, you can start formatting the disk by right-clicking in the white area.

After this procedure, the disk is ready for use.

Backup software

If you wish to use the backup function, put the Sweex CD-ROM in the CD-ROM player and click the button to install "Backup Software”.

You can start the software via “Start ---> Programmes ---> PCCLoneEx ---> PCCLoneEx”

(Start ---> Programmes ---> PCCLoneEx ---> PCCLoneEx).

Alternatively, click the icon on your desktop.

English version

Starting a backup

1.Under “Files Backup”, select the folders or files you wish to add to the backup procedure.

2.Under “USB Device”, select the location where the files will be stored. Select the drive letter of the Sweex External 3.5" Storage Solution.

3.Click on “Backup” to start the process.

The files will be saved on the “USB Device” using the same folder structure.

Note! The folders and files on the “USB device” are hidden.

In Windows Explorer, via “Tools ---> Folder Options ---> View” (Tools ---> Folder Options ---> View), you can select “Show hidden files and folders”

(Show hidden files and folders).

You can also use the backup button on the Sweex External 3.5" Storage Solution in order to start the backup.

Restore

1. The window on the right shows any previous backups made. Here you can select the required folders or files in order to restore.

English version

2. Click on “Restore” to restore the files from the backup location to the original location on the computer.

Warranty

All products under the Sweex brand are warranted for a period of three years. We do not grant support or warranties for any software and/or

(rechargeable) batteries included. Settlement of guarantee only takes place via the dealer where you have purchased the product in question.

The rightful owner has and retains title to all brand names and related rights mentioned in this manual.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SWEEX Stockage

SWEEX

SWEEX ST030V2 - QUICK_START_GUIDE Manuel de référence

SWEEX

SWEEX ST020 - QUICK_START_GUIDE Manuel de référence

SWEEX

SWEEX ST021 Manuel utilisateur

SWEEX

SWEEX ST040 - QUICK_START_GUIDE Manuel de référence

SWEEX

SWEEX US005 - QUICK_START_GUIDE Manuel de référence

SWEEX

SWEEX ST021V2 - QUICK_START_GUIDE Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur