Swann ADS-453 QSG Manuel utilisateur
1
EN
SwannEye HD Plug & Play
Wi-Fi Security Camera
Quick Start Guide
Welcome!
Lets get started.
QHADS453080414E | © Swann 2014
Congratulations on your purchase of this SwannEye HD Plug
& Play Wi-Fi Security Camera from Swann!
This quick start guide will familiarize you with the features
and functionality of your camera and walk you through the
basics of:
• Connecting the camera to your network
How to connect the camera to your wired or wireless network
• Using the SwannEye HD software/mobile app
How to install the SwannEye HD software/mobile app on
your computer and mobile device, and create an account to
access and control the camera.
1Introduction
Before installing anything permanently, connect everything up and test the camera - just to make sure nothing was
damaged during shipping!
2Getting to Know the Camera
Front View
1. Microphone - Allows the camera to hear nearby
sounds and stream them with the video.
2. Light Sensor - Detects the amount of incoming light
andturnsontheIRLEDsfornightvisionwhennecessary.
3. Infrared (IR) LEDs - Illuminates targeted areas when
in near-total darkness.
4. Speaker - The various alerts and alarms will be heard
from here.
1
2
4
3
Back View
1. Ethernet Port - For a wired connection, connect
this to a spare port on your wireless router.
2. Power Connector -For connecting the supplied
power adapter.
3. Reset Button -Press and hold while disconnecting
and reconnecting the power supply to reset the
camera’s settings to factory defaults.
4. WPS Button -For connecting wirelessly to a WPS-
enabled router.
5. LED Indicators - These display the current status
of the camera.
•Wi-Fi LED - Lights up when the camera is
connected to your Wi-Fi network.
•LAN LED - Lights up when the camera is
connected to your network using the Ethernet
cable.
•Power LED - Lights up when the camera is
connected to power and switched on.
12
3
45
Side View
Stand
1. Micro-SD Card Slot - Inserting a Micro-SD card
allows you to capture snapshots and record
videos directly to the card. This is optional and is
recommended for advanced users only.
2. Bracket Mount -Attach the supplied camera
stand here.
1
2
3
3. Mounting Plate - Underneath the camera
stand is a mounting plate. You can use this
to mount the camera to a wall or ceiling.
A
3Installing the Camera
Screw the camera stand to the bracket
mount located on the camera. Use a
clockwise motion to connect. Adjust
the stand accordingly.
B
Connect the supplied power adapter to the
power input on the camera and then plug the
power adapter into an electrical outlet. The
Power LED on the back of the camera lights
up when the camera is connected to a power
source.
2
4Connecting to your Network
If your router doesn’t support WPS and you want to connect wirelessly then that’s ok, just connect the camera to your
home network through the Ethernet cable and then configure camera’s Wireless Network settings in the SwannEye HD
Pro software. For additional information, see the SwannEye HD instruction manual.
Wired Network:
Connect the camera’s Ethernet port to any available port on your wireless router
using the supplied Ethernet cable (see opposite). Make sure the computer that you
want to use to configure and/or access the camera is connected to the same router.
Wireless Network:
If your wireless router supports Wi-Fi Protected Setup (WPS), you can easily create
a WPS connection to the camera. WPS is a way of securely connecting devices to
a wireless network without all that fussing about with IP addresses or security
keycodes. To create a WPS connection:
1. Press and hold the WPS button on the back of the camera until the blue Wi-Fi LED indicator starts
blinking.
2. Press the WPS button on your router. This button is located in different places on different routers -
some might require that you press and hold the button and others might only need a momentary press.
Check your router’s documentation for assistance. The camera will automatically create a wireless
connection to your router and once this connection is established, the Wi-Fi LED indicator will steady.
5Installing SwannEye HD Pro Software
SwannEye HD is also available for Android and iPhone smartphones. Download this app for free from the Apple App
Store or Google Play Store and start watching your camera anywhere, anytime!
SwannEye HD Pro is designed to enable
you to easily access and control your
camera that’s connected on your home
network from your computer.
All you have to do to get started is to
download and install the software from
www.swanneye.com then register for
an account using the ‘Device No:’ and
‘Verification No:’ which are printed on the
sticker on the back of the camera.
After you’ve set up a new account, you will be able to watch live video feeds from your camera,
simultaneously record and playback videos you have just taken while your current recording
continues uninterrupted and also configure various aspects of your camera such as video/
audio settings, wireless network and alarm.
6Registering an Account
1. Once you’ve installed SwannEye HD Pro on your computer, double-click the “SwannEye HD Pro” icon located on
your desktop. The login screen is the first thing you will see when you start the software.
2. Click the “Register account” button to commence registration.
3. Enter the “Device No.” and
“Verification No.” printed
on a sticker that is located
on the camera. It will look
something like this:
The “Device No.” and
“Verification No.” are case
sensitive. Only one camera
is required to register an
account, but additional
cameras can be added
later.
4. Enter a username. Your username can be any combination of letters and numbers. Usernames are case sensitive.
5. Enter a password and confirm in the field below. Like the username, passwords are case sensitive.
6. Enter a valid email address. If you forget your password, this is how we can contact you.
7. When you’re done, click the “Submit” button to close the registration window and to register your account.
If you’ve made a mistake copying down the codes, you will see an error message after clicking the “Submit” button. If this happens, your
account will not be registered. To retry, just restart the registration process.
Table des matières
Autres manuels Swann Caméra de sécurité
Swann
Swann PTZ INTERNAL Speed Dome Manuel utilisateur
Swann
Swann DVR16-8600 Combo Guide de démarrage rapide
Swann
Swann PRO-530 Manuel utilisateur
Swann
Swann C510R Manuel utilisateur
Swann
Swann ADS-450 Manuel utilisateur
Swann
Swann NHD-POE Series Manuel utilisateur
Swann
Swann Black & White Dome Cam Manuel utilisateur
Swann
Swann SW322-YDX Manuel utilisateur
Swann
Swann NHD-819 Manuel utilisateur
Swann
Swann Imitation Security Device Manuel utilisateur
Swann
Swann HD-420 Manuel utilisateur
Swann
Swann Wire-Free Manuel utilisateur
Swann
Swann PRO-643 Manuel utilisateur
Swann
Swann PRO-771 Manuel utilisateur
Swann
Swann PRO-series Manuel utilisateur
Swann
Swann Dummy MaxiBrite SW215-DML Manuel utilisateur
Swann
Swann Black Knight Manuel utilisateur
Swann
Swann PRO-754 Manuel utilisateur
Swann
Swann MicroCam III Manuel utilisateur
Swann
Swann PRO-650 Manuel utilisateur
