SV3C CQ1-CG522 Manuel technique
Wireless Battery Camera
Operation Instruction
Contents
1.Packing list---------------------------------------01
2.Product appearance---------------------------02
3.Quick start---------------------------------------06
4.Set up the camra--------------------------------08
5.Install the camera---------------------------------13
6.Share the camera---------------------------------19
7.Charge the camera------------------------------22
8.Indicator light status--------------------------23
9.Product specification------------------------23
10.Firmware upgrade-------------------------24
11.FCC warning-----------------------------------24
12.FAQ-------------------------------------------26
Packing list
01
1. Camera*1
2. Bracket*1
3. Mounting kit*1
4. USB charging cable *1
5. Operation instruction*1
6. Screw for bracket*1
02
Product appearance (Dome camera)
Infrared lamp Lens
Indicator light
Human body
infrared sensor
MIC
Wi-Fi antenna
White light
03
Micro-SD card slot
Power button
Micro-USB port
Reboot hole
Speaker
Product appearance (Bullet camera)
Microphone
Infrared light
Spotlight
Lens
Indicator light
Human body
infrared sensor
04
Power button
Threaded bracket
interface
Speaker
Micro-SD card
Micro-USB port
Reboot button
05
06
Quick start
The smart battery camera supports battery-powered supply
and AC-powered supply.
1. Download and install the App
1),The wireless smart battery camera supports Android and
iOS App. For your best experience, please scan the QR code
below with your mobile phone, install the app, and follow
the instruction to complete the user registration.
Download App
Android
Download
Download
App Store
Scan QR code or go to the link to download and install the
App：https://www.vicohome.io/download/
2), Search for "Vicohome" to download the app from Google play
(Andriod) or APP Store (iphone)
07
2. Add the device
Sign in to the App connect to Wi-Fi and add the device
according to the prompts (please bring the device close
to the router when conguring).
08
Set up the camera
Click the "Add Camera Now" in the App and enter the Wi-Fi
network name and password that you want the camera to
connect.
The following operations take the dome camera as an example.
Table des matières
Autres manuels SV3C Appareil photo numérique
