suprema BioStation 3 Manuel utilisateur
Version 1.04
English
EN 102.00.BS3 V1.04
BioStation 3
USER GUIDE
Safety Instructions 3
Instructional Icons 3
Introduction 6
Components 6
Name and Function of Each Part 7
Cables and Connectors 9
Correct Face Enrollment and
Authentication Method 11
Note for QR Code Usage and Device License 12
Admin Menu 13
DASHBOARD 13
User 14
Registering User Information 14
Modifying User Information 16
Delete All Users 16
View User Usage 17
Authentication 18
Auth Mode 18
Registering Auth Mode 18
Modifying Auth Mode 19
Delete Auth Mode 20
Operation 20
Face 22
T&A Mode 24
Settings 25
Display & Sound 25
Network 26
Ethernet 26
Wireless 27
Server 28
Serial Settings 28
Devices 29
Intercom 29
License 30
Relay 31
Date & Time 32
Daylight Saving Time 33
Device Information 34
Memory Information 35
USB Memory 35
Secure Tamper 36
RTSP 37
Restart Device 37
Restore Default 38
User ID Type 38
CONTENTS
CONTENTS
Event Logs 39
Search Event Logs 39
Delete All Logs 39
View Log Usage 40
Troubleshooting 41
Product Specifications 42
Dimensions 44
Regulatory Information 45
Regulatory & Licenses 45
FCC Compliance Information 45
EU Declaration of Conformity (CE) 46
Appendices 47
Disclaimers 47
Copyright Notice 48
Open Source License 48
GNU General Public License 49
GNU Lesser General Public License 57
OpenSSL License 60
Original SSLeay License 61
3
Safety Instructions
Safety Instructions
Please read this safety instructions before you use the product to prevent injury to yourself and others and to prevent
property damage. The term ‘product’ in this manual refers to the product and any items provided with the product.
Instructional Icons
Warning: This symbol indicates situations that could result in death or severe injury.
Caution: This symbol indicates situations that may result in moderate injury or property damage.
Note: This symbol indicates notes or additional information.
Warning
Installation
When using a high-capacity power supply, please pay special attention to avoid miswiring.
•Miswiring may result in serious fire, electric shock, or product damage.
Do not install or repair the product arbitrarily.
•This may result in electric shock, fire, or product damage.
•Damages caused by any modifications or failure to follow installation instructions can void your manufacturer’s
warranty.
Do not install the product in a place with direct sunlight, moisture, dust, soot, or a gas leak.
•This may result in electric shock or fire.
Install the product in a well-ventilated and cool place away from direct sunlight to prevent overheating when
installing it outside.
Do not place the product inside the sealed enclosure when installing it outside.
•It increases the internal temperature of the enclosure and this may result in electric shock, fire, or malfunction.
Do not install the product in a location with heat from an electric heater.
•This may result in fire due to overheating.
Install the product in a dry location.
•Humidity and liquids may result in electric shock or product damage.
Do not install the product in a location where it will be affected by radio frequencies.
•This may result in fire or product damage.
Operation
Keep the product dry.
•Humidity and liquids may result in electric shock, fire, or product damage.
Do not use damaged power supply adapters, plugs, or loose electrical sockets.
•Unsecured connections may cause electric shock or fire.
Do not bend or damage the power cord.
•This may result in electric shock or fire.
4
Safety Instructions
Caution
Installation
Please read this manual before installing the product to ensure a safe and correct installation.
When wiring the power cable and other cables, make sure to connect them with the power turned off for all
devices involved.
•The product may malfunction.
Before connecting power to the product, double-check the manual to ensure that the wiring is correct, then
connect the power.
Do not install the product under direct sunlight or UV light.
•This may result in product damage, malfunction, discoloration, or deformation.
Do not install the power supply cable in a location where people pass by.
•This may result in injury or product damage.
Do not install the product near magnetic objects, such as a magnet, TV, monitor (especially CRT), or speaker.
•The product may malfunction.
Keep the minimum distance between products when installing multiple products.
•The product may be affected by radio frequencies emitted by other products and the product may malfunction.
Use the IEC/EN 62368-1 approved power adapter that supports higher power consumption than the product. It
is highly recommended to use the power adapter sold by Suprema.
•If the right power supply is not used, the product may malfunction.
•Refer to the Power in the product specifications for maximum current consumption specifications.
Use a separate power supply for the Secure I/O 2, electric lock, and the product.
•If connecting and using the same power supply, the product may malfunction.
Do not connect and use the power supply and Power over Ethernet (PoE) simultaneously.
•The product may malfunction.
Make sure that the cable cover is completely closed after connecting it to the product to maintain the water-
resistant and dust-resistant features (IP65 rating). It is recommended to use the enclosure if the product is
installed outside.
•The product may malfunction if the water-resistant and dust-resistant features are damaged.
5
Safety Instructions
Caution
Operation
Do not drop the product or cause impacts to the product.
•The product may malfunction.
Do not disconnect the power supply while upgrading the firmware of the product.
•The product may malfunction.
Do not disclose the password to others and change it regularly.
•This may result in illegal intrusion.
Do not press buttons(touch pad) on the product by force or do not press them with a sharp tool.
•The product may malfunction.
Do not store your product in very hot or very cold places. It is recommended to use your product at
temperatures from -20 °C to 50 °C.
•The product may malfunction.
When cleaning the product, mind the following.
•Wipe the product with a clean and dry towel.
•If you need to sanitize the product, moisten the cloth or the wipe with a proper amount of rubbing alcohol and gently
clean all exposed surfaces. Use rubbing alcohol (containing 70% Isopropyl alcohol) and a clean, non-abrasive cloth like
lens wipe.
•Do not apply liquid directly to the surface of the product.
Do not use the product for anything other than its intended use.
•The product may malfunction.
RTC Battery
Use of an unapproved or incorrect type of battery may result in a risk of explosion. Discard the battery according to the
appropriate regional or international waste regulations.
6
Introduction
Introduction
Components
BS3-DB
BS3-APWB
164
160.5
72.9
83.5
BioStation 3 Wall Bracket Drilling Template
Connection Cables Diode 120ΩResistor
BioStation 3
201.00.BS3.**
PVC Anchor x2 Fixing Screw x2 Bracket Fixing Screw
(Star Shaped) Quick Guide
•Components may vary according to the installation environment.
•When assembling the product with the bracket, you can use the included bracket fixing screw (Star Shaped)
instead of the product fixing screw for enhanced security.
•For more details regarding the product installation, visit the Suprema website (https://www.supremainc.
com) and refer to the installation guide.
7
Introduction
Name and Function of Each Part
Infrared Camera
LCD Screen
RF card and mobile access
card authentication unit
Visual Camera
LED Indicator
Speaker
Relay (3-pin)
Wiegand Output (4-pin)
Power Supply (2-pin)
USB (Type-C) Memory Slot
Ethernet
USB Expansion Port (5-pin)
RS-485 (4-pin)
TTL Input (5-pin)
Wiegand Input (4-pin)
Name Description
Infrared Camera Capture the infrared face image.
Visual Camera Capture an actual face image.
LCD Screen Provides a UI for operation.
RF card and mobile access
card authentication unit Part to scan a RFID card or mobile access card for entrance.
8
Introduction
Name Description
LED Indicator
Indicates the operational status of the device with the color of the LED.
•Green: Authentication success.
•Red: Authentication failure.
•Blue: Normal operation.
•Blue/Green blinking:
‒Fails to receive an IP address when DHCP is enabled.
‒Disconnection with the master device when in Slave mode.
•Red/Purple blinking: Device is locked.
•Yellow blinking: Waiting for an input.
Speaker Delivers sound.
Ethernet Connect the Ethernet cable.
TTL Input (5-pin) Connect the TTL input cable.
USB Expansion Port (5-pin) Connect other accessory products.
Wiegand Output (4-pin) Connect the Wiegand Output cable.
Wiegand Input (4-pin) Connect the Wiegand Input cable.
RS-485 (4-pin) Connect the RS-485 cable.
Relay (3-pin) Connect the Relay cable.
Power Supply (2-pin) Connects the power supply cable.
USB (Type-C) Memory Slot Connects the USB memory.
9
Introduction
Cables and Connectors
Power supply
Pin Name Color
1 PWR +VDC Red (White stripe)
2 PWR GND Black (White stripe)
Relay
Pin Name Color
1 RLY NO White
2 RLY COM Blue
3 RLY NC Orange
RS-485
Pin Name Color
1 485 TRXP Blue
2 485 TRXN Yellow
3 485 GND Black
4 SH GND Gray
Autres manuels pour BioStation 3
1
Table des matières
Autres manuels suprema Contrôleurs d'accès IP
suprema
suprema FaceStation Manuel utilisateur
suprema
suprema Xpass Slim Manuel utilisateur
suprema
suprema CoreStation CS-40 Manuel utilisateur
suprema
suprema BioStation 2 Manuel utilisateur
suprema
suprema biostation Manuel utilisateur
suprema
suprema BioLite N2 Manuel utilisateur
suprema
suprema Xpass Manuel utilisateur
suprema
suprema bioentry w Manuel utilisateur
suprema
suprema BioStation 3 Manuel utilisateur
suprema
suprema FS2-D Manuel utilisateur
