Supero SC846TQ-R1200B Manuel utilisateur

IceBreaker 4924

Technical Guide

Rev. 1.0

PENGUIN

COMPUTING

www.penguincomputing.com | 1-888-PENGUIN (736-4846) | twitter:@PenguinHPC

SC846 CHASSIS SERIES

USER’S MANUAL

2.0a

SUPER ®

SC846TQ-R1200B

SC846E26-R1200B SC826E16-R1200B

SC846E1-R1200B SC846A-R1200B

SC846BE16-R920B SC846BE26-R920B

SC846BA16-R920B SC846BA26-R920B

SC846TQ-R900B SC846E1-R900B

SC846E2-R900B SC846E1-R710B

SC846 Chassis Manual

Manual Revision 2.0a Release

Date: February 19, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates.Please Note:For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice.This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes.Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC846 chassis. Installation

and maintenance should be performed by experienced technicians only.

This manual lists compatible parts available when this document was published. Al-

ways refer to the our Web site for updates on supported parts and configurations.

SC846 Chassis Manual

Manual Organization

Chapter 1 Introduction

The first chapter provides a checklist of the main components included with this

chassis and describes the main features of the SC846 chassis. This chapter also

includes contact information.

Chapter 2 System Safety

This chapter lists warnings, precautions, and system safety. It recommended that

you thoroughly familiarize yourself installing and servicing this chassis safety pre-

cautions.

Chapter 3 Chassis Components

Refer here for details on this chassis model including the fans, bays, airflow shields,

and other components.

Chapter 4 System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 5 Chassis Setup and Maintenance

Follow the procedures given in this chapter when installing, removing,

reconfiguring your chassis.

Chapter 6 Rack Installation

Refer to this chapter for detailed information on chassis rack installation. You should

follow the procedures given in this chapter when installing, removing or

reconfiguring your chassis into a rack environment.

Appendices

This section lists compatible cables, power supply specifications, and compatible

backplanes. Not all compatible backplanes are listed. Refer to our Web site for the

latest compatible backplane information.

Appendix A Cables and Hardware

This section provides information on cabling, and other hardware which is compat-

ible with your chassis. For complete information on supported cables and hardware,

refer to the Supermico Web site at www.supermicro.com.

Appendix B Power Supply Specifications

This chapter lists the specifications for the power supply provided with your chas-

sis. For additional information, refer to the Supermicro website at www.supermicro.

com.

Appendix C SAS-846TQ Backplane Specifications

This section contains details specific to the SAS-846TQ backplane for the SC846TQ

chassis. Additional information can be found on the Supermicro Web site at www.

supermicro.com.

Appendix D SAS-846EL Backplane Specifications

Refer to this chapter for detailed specifications on the SAS-846EL backplane for the

SC846-EL chassis systems. Additional information can be found on the Supermicro

Web site at www.supermicro.com.

Appendix E SAS2-846EL Backplane Specifications

This section contains detailed specifications on the SAS2-846EL backplane for the

SC846-EL chassis system. Additional information can be found on the Supermicro

Web site at www.supermicro.com.

Appendix F SC846B Chassis Specifications

This section provides information specific to the SC846B model chassis. Additional

information can be found on the Supermicro Web site at www.supermicro.com.

Preface

SC846 Chassis Manual

Chapter 1 Introduction

1Overview 1-1

2Shipping List 1-1

1-3 Where to get Replacement Components 1-2

1-4 Contacting Supermicro 1-3

1-5 Returning Merchandise for Service 1-4

Chapter 2 Standardized Warning Statements for AC Systems

2-1 About Standardized Warning Statements 2-1

Warning Definition 2-1

Installation Instructions 2-4

Circuit Breaker 2-5

Power Disconnection Warning 2-6

Equipment Installation 2-8

Restricted Area 2-9

Battery Handling 2-10

Redundant Power Supplies 2-12

Backplane Voltage 2-13

Comply with Local and National Electrical Codes 2-14

Product Disposal 2-15

Hot Swap Fan Warning 2-16

Power Cable and AC Adapter 2-18

Chapter 3 System Interface

3-1 Overview 3-1

3-2 Control Panel Buttons 3-2

3-3 Control Panel LEDs 3-2

3-4 Drive Carrier LEDs 3-4

SAS/SATA Drives 3-4

SCSI Drives 3-4

Chapter 4 Chassis Setup and Maintenance

4-1 Overview 4-1

4-2 Removing the Chassis Cover 4-2

4-3 Installing Hard Drives 4-3

4-4 Installing the Motherboard 4-6

I/O Shield 4-6

Table of Contents

vii

Preface

Permanent and Optional Standoffs 4-7

Expansion Card Setup 4-9

4-5 Installing the Air Shroud 4-10

4-6 Checking the Server's Airflow 4-11

4-7 System Fans 4-12

4-8 Power Supply 4-14

4-9 Changing the Power Distributor 4-17

4-10 Changing the CD-ROM or DVD-ROM and HDD Trays 4-19

4-11 Accessing the Backplane 4-22

Chapter 5 Rack Installation

5-1 Overview 5-1

5-2 Unpacking the System 5-1

5-3 Preparing for Setup 5-1

Choosing a Setup Location 5-1

5-4 Warnings and Precautions 5-2

Rack Precautions 5-2

General Server Precautions 5-2

Rack Mounting Considerations 5-3

Ambient Operating Temperature 5-3

Reduced Airflow 5-3

Mechanical Loading 5-3

Circuit Overloading 5-3

Reliable Ground 5-3

5-6 Rack Mounting Instructions 5-4

Identifying the Sections of the Rack Rails 5-4

Locking Tabs 5-5

Releasing the Inner Rail 5-5

Installing The Inner Rails on the Chassis 5-6

Installing the Outer Rails on the Rack 5-7

Standard Chassis Installation 5-8

Optional Quick Installation Method 5-9

Appendix A SC846 Cables and Hardware

Appendix B SC846 Power Supply Specifications

Appendix C SAS-846TQ Backplane Specifications

Appendix D SAS-846EL Backplane Specifications

Appendix E SAS2-846EL Backplane Specifications

Appendix F SC846B Chassis Specifications

SC846 Chassis Manual

viii

Notes

Chapter 1: Introduction

Chapter 1

Introduction

1 Overview

Supermicro’s SC846 4U chassis features a unique and highly optimized design.

The chassis is equipped with redundant high-efficiency power supplies. High-

performance fans provide ample optimized cooling and twenty-four hot-swappable

drive bays offer maximum storage capacity.

2Shipping List

Visit www.supermicro.com for the latest shipping lists for your chassis model.

Note: A complete list of safety warnimgs is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

1-1

SC846 Chassis

Model CPU HDD PCI

Slots Redundant Power

Supplies

SC846E16-R1200B DP/UP 24x SAS/SATA7x FF 1200W (Gold Level)

SC846E26-R1200B DP/UP 24x SAS/SATA7x FF 1200W (Gold Level)

SC846TQ-R1200B DP/UP 24x SAS/SATA7x FF 1200W (Gold Level)

SC846E1-R1200B DP/UP 24x SAS/SATA7x FF 1200W (Gold Level)

SC846A-R1200B DP/UP 24x SAS/SATA7x FF 1200W (Gold Level)

SC846BE26-R920B DP/UP 24x SAS/SATA7x FF 920W

SC846BE16-R920B DP/UP 24x SAS/SATA7x FF 920W

SC846BA26-R920B DP/UP 24x SAS/SATA7x FF 920W

SC846BA16-R920B DP/UP 24x SAS/SATA7x FF 920W

SC846TQ-R900B DP/UP 24x SAS/SATA7x FF 900W

SC846E1-R900B DP/UP 24x SAS/SATA7x FF 900W

SC846E2-R900B DP/UP 24x SAS/SATA7x FF 900W

SC846E1-R710B DP/UP 24x SAS/SATA7x FF 710W

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Supero Serveur

Supero

Supero SuperServer 5014C-MR Manuel utilisateur

Supero

Supero AS 1021TM-T+ Manuel utilisateur

Supero

Supero SuperServer 5013G-M Manuel utilisateur

Supero

Supero 1022GG-TF Manuel utilisateur

Supero

Supero SuperServer 7042P-8R Manuel utilisateur

Supero

Supero SUPERSERVER 6047R-TXRF Manuel utilisateur

Supero

Supero SuperWorkstation 7046A-T Manuel utilisateur

Supero

Supero A+ 2022TC-HTRF4 Manuel utilisateur

Supero

Supero SUPERSERVER 1026T-URF4+ Manuel utilisateur

Supero

Supero A+ SERVER 2022TG-HTRF Manuel utilisateur

Supero

Supero SC936A-R900B Manuel utilisateur

Supero

Supero SUPERSERVER 6015W-Ni Manuel utilisateur

Supero

Supero 1026T-6RF+ Manuel utilisateur

Supero

Supero SUPERSERVER Manuel utilisateur

Supero

Supero Supero SuperServer 5037C-T Manuel utilisateur

Supero

Supero MicroCloud 5038ML-H8TRF Manuel utilisateur

Supero

Supero SUPERSERVER 2026T-6RFT+ Manuel utilisateur

Supero

Supero SuperServer 5014C-M8 Manuel utilisateur

Supero

Supero SUPERO SuperServer 5036I-I Manuel utilisateur

Supero

Supero SUPERO SuperServer 6026TT-H6RF Manuel utilisateur

Supero

Supero 2027TR-H70QRF Manuel utilisateur

Supero

Supero SuperServer 5028R-WR Manuel utilisateur

Supero

Supero AS-1011M-UR Manuel utilisateur

Supero

Supero A+ SERVER Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur