Supermicro A+ SERVER 1022G-URF Manuel utilisateur

A+ SERVER 1022G-URF

SUPER ®

USER’S MANUAL

Revision1.0e

A+ Server 1022G-URF User's Guide

Manual Revision 1.0e

Release Date: March 06, 2014

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the A+ SERVER 1022G-URF.

Installation and maintenance should be performed by experienced technicians only.

The A+ SERVER 1022G-URF is a 1U rackmount server based on the

SC815TQ-R700UB server chassis and the Super H8DGU-F serverboard. Please

refer to our web site for updates on supported processors.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the Supermicro H8DGU-F

serverboard and the SC815TQ-R700UB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the A+ SERVER 1022G-URF

into a rack and check out the server conguration prior to powering up the system.

If your server was ordered without the processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Warning Statements for AC Systems

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the A+

SERVER 1022G-URF.

A+ Server 1022G-URF User's Guide

Chapter 5: Advanced Serverboard Setup

This chapter provides detailed information on the H8DGU-F serverboard, including

the locations and functions of connectors, headers and jumpers. Refer to this chap-

ter when adding or removing processors or main memory and when reconguring

the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC815TQ-R700UB chassis.

You should follow the procedures given in this chapter when installing, removing

or reconguring Serial ATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Error Codes

Appendix B: Installing Windows

Appendix C: System Specications

Preface

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

UIO.................................................................................................................. 1-2

Serial ATA ....................................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-2

Graphics Controller ......................................................................................... 1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

PCI Expansion Slots ....................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

I/O Backplane.................................................................................................. 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

A+ Server 1022G-URF User's Guide

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Outer Rails................................................................................. 2-5

Installing the Server into the Rack.................................................................. 2-6

Installing the Server into a Telco Rack ........................................................... 2-7

2-6 Checking the Serverboard Setup.................................................................... 2-8

2-7 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

UID .................................................................................................................. 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Information LED .............................................................................................. 3-2

NIC2 ................................................................................................................ 3-3

NIC1 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 Hard Drive Carrier LEDs................................................................................. 3-4

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

vii

Preface

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Processor and Heatsink Installation................................................................ 5-2

Installing a Passive CPU Heatsink ................................................................. 5-4

5-3 Connecting Cables.......................................................................................... 5-5

Connecting Data Cables ................................................................................. 5-5

Connecting Power Cables .............................................................................. 5-5

Connecting the Control Panel......................................................................... 5-5

5-4 I/O Ports.......................................................................................................... 5-6

5-5 Installing Memory............................................................................................ 5-7

Memory Support.............................................................................................. 5-7

DIMM Module Population Conguration .................................................... 5-8

5-6 Adding PCI Cards ......................................................................................... 5-10

5-7 Serverboard Details .......................................................................................5-11

H8DGU(-F) Quick Reference........................................................................ 5-12

5-8 Connector Denitions ................................................................................... 5-13

5-9 Jumper Settings ............................................................................................ 5-19

Explanation of Jumpers ................................................................................ 5-19

5-10 Onboard Indicators........................................................................................ 5-21

5-11 SATA Drive Connections............................................................................... 5-22

5-12 Enabling SATA RAID..................................................................................... 5-23

Serial ATA (SATA).......................................................................................... 5-23

Installing the OS/SATA Driver ....................................................................... 5-23

Building a Driver Diskette......................................................................... 5-23

Enabling SATA RAID in the BIOS................................................................. 5-24

Using the Adaptec RAID Utility ..................................................................... 5-25

Installing the RAID Driver During OS Installation......................................... 5-25

5-13 Installing Software......................................................................................... 5-26

Supero Doctor III........................................................................................... 5-27

5-14 Serverboard Battery...................................................................................... 5-29

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

A+ Server 1022G-URF User's Guide

viii

6-3 System Fans ................................................................................................... 6-2

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-4

Removing the Front Bezel .............................................................................. 6-4

Accessing the Drive Bays ............................................................................... 6-4

Hard Drive Installation..................................................................................... 6-5

DVD-ROM Drive Installation ........................................................................... 6-6

6-5 Power Supply.................................................................................................. 6-7

Power Supply Failure................................................................................. 6-7

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting the Setup Utility ................................................................................. 7-1

7-2 Main Menu ...................................................................................................... 7-1

System Time/System Date ............................................................................. 7-2

7-3 Advanced Settings Menu ................................................................................ 7-2

7-4 Security Menu ............................................................................................... 7-13

7-5 Boot Menu..................................................................................................... 7-14

7-6 Exit Menu ...................................................................................................... 7-14

Appendix A BIOS Error Beep Codes

Appendix B Installing Windows

B-1 Installing the Windows OS for a RAID System ..............................................B-1

B-2 Installing the Windows OS for a Non-RAID System.......................................B-2

Appendix C System Specications

Chapter 1

Introduction

1-1 Overview

The A+ Server 1022G-URF is a high-end server comprised of two main subsys-

tems: the SC815TQ-R700UB 1U server chassis and the H8DGU-F dual processor

serverboard. Please refer to our web site for information on operating systems that

have been certied for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 1022G-URF, as listed below:

•One (1) slim DVD-ROM drive (DVM-PNSC-DVD-SBT or DVM-TEAC-DVD-

SBT)

•One (1) SATA-to-USB adapter for DVD-ROM drive (CDM-USATA-G)

•One (1) DVD-ROM drive cable (CBL-00341L)

•Four (4) sets of 4-cm counter-rotating fans (FAN-0086L4)

•One (1) air shroud (MCP-310-18002-0N)

•Two (2) 1U passive CPU heatsinks (SNK-P0042P)

•One (1) RSC-R1UU-UE16 for PCI-E card (see Section 5-6 for details)

•One (1) Slim Floppy Drive (FPD-TEAC-SB)

•SAS/SATA Accessories

One (1) SATA backplane (BPN-SAS-815TQ)

One (1) iPASS-to-SATA cable (CBL-0188L)

Four (4) 3.5" HDD trays (MCP-220-00024-0B)

One (1) Front Control cable (CBL-0191L)

One (1) rackmount kit (CSE-PT51L)

Note: For your system to work properley, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

Chapter 1: Introduction

1-1

1-2

A+ SERVER 1022G-URF User's Manual

•Product safety information:

http://super-dev/about/policies/safety_information.cfm

For support, email [email protected].

1-2 Serverboard Features

At the heart of the A+ SERVER 1022G-URF lies the H8DGU-F, a dual processor

serverboard based on the AMD SR5670/SP5100 chipset. Below are the main fea-

tures of the H8DGU-F. (See Figure 1-1 for a block diagram of the chipset).

Processors

The H8DGU-F supports single or dual AMD Opteron 6100 Series processors in

Socket G34 type sockets. Please refer to our web site for a complete listing of

supported processors (www.supermicro.com).

Memory

The H8DGU-F has sixteen single/dual/tri/quad channel 240-pin DIMM sock-

ets that can support up to 128 GB of ECC/Non-ECC Unbuffered, 512 GB of

ECC Low-prole Registered LRDIMM, or 512 GB of ECC Registered DIMM

DDR3-1600/1333/1066 Mhz speed, SDRAM memory. Please refer to Chapter 5

for installing memory.

UIO

The H8DGU-F is a specially-designed serverboard that features Supermicro's UIO

(Universal I/O) technology. UIO serverboards have a PCI Express x8 slot that can

support any one of several types of UIO card types to add SAS ports, additional

LAN ports, etc. to the serverboard. This allows the user to tailor the serverboard

to their own needs.

Note: The UIO function is optional; the server does not come with a UIO card

installed.

Serial ATA

An on-chip (SP5100) SATA controller is integrated into the H8DGU-F to provide

a six-port, 3 Gb/sec SATA subsystem, which is RAID 0, 1, and 10 supported. The

SATA drives are hot-swappable units.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Supermicro Serveur

Supermicro

Supermicro SuperServer 610U-TNR Manuel utilisateur

Supermicro

Supermicro SuperServer 5019D-FN8TP Manuel utilisateur

Supermicro

Supermicro SuperServer 620U-TNR Manuel utilisateur

Supermicro

Supermicro SuperServer 5039MC-H8TRF Manuel utilisateur

Supermicro

Supermicro SuperServer SYS-820GH-TNR2 Manuel utilisateur

Supermicro

Supermicro SuperServer 1029UZ-TN20R25M Manuel utilisateur

Supermicro

Supermicro SuperServer SYS-530MT-H12TRF Manuel utilisateur

Supermicro

Supermicro SC847 CHASSIS SERIES Manuel utilisateur

Supermicro

Supermicro FatTwin AS-F2014S-RNTR Manuel utilisateur

Supermicro

Supermicro SUPERSERVER 6015A-NT Manuel utilisateur

Supermicro

Supermicro A+ Server AS-2115GT-HNTR Manuel utilisateur

Supermicro

Supermicro SUPERSERVER 6025W-UR Manuel utilisateur

Supermicro

Supermicro BPN-NVMe3-136NB-L Manuel utilisateur

Supermicro

Supermicro FatTwin F629P3-RTB Manuel utilisateur

Supermicro

Supermicro SuperServer 6011D Manuel utilisateur

Supermicro

Supermicro SuperServer E403-9P-FN2T Manuel utilisateur

Supermicro

Supermicro SUPERSERVER 9029GP-TNVRT Manuel utilisateur

Supermicro

Supermicro SUPERSERVER 6013A-T Manuel utilisateur

Supermicro

Supermicro SYS-F629P3-RTB Manuel du propriétaire

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DC0R Manuel utilisateur

Supermicro

Supermicro SUPERSERVER 6015B-NT Manuel utilisateur

Supermicro

Supermicro SuperServer 120C-TR Manuel utilisateur

Supermicro

Supermicro SuperServer 1029U-TN10RT Manuel utilisateur

Supermicro

Supermicro SuperServer 6029TR-DTR Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur