Supermicro MicroBlade MBM-GEM-001 Manuel utilisateur
MicroBlade®
Network Modules
User’s Manual
Revison 1.0a
MBM-GEM-001 2.5-Gbps/1 Gbps
Ethernet Switch Module
MBM-GEM-003s 2.5-Gbps/1 Gbps
Ethernet Switch Module
MBM-GEM-003i 2.5-Gbps/1 Gbps
Ethernet Switch Module
MicroBlade Network Modules User’s Manual
ii
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. Please Note: For the most up-to-date version of this manual, please see
our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software and documentation, is the
property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction
of this product is not allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara
County in the State of California, USA.. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further
details.
Manual Revison 1.0a
Release Date: October 24, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document.
Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS
PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER
REPRODUCTIVE HARM.
iii
Preface
About this Manual
This manual is written for professional system integrators, Information Technology
professionals, service personnel and technicians. It provides information for the
installation and use of Supermicro's network modules. Installation and maintenance
should be performed by experienced professionals only.
Manual Organization
Chapter 1: Introduction
The first chapter provides an overview of this manual.
Chapter 2: System Safety
You should familiarize yourself with this chapter for a general overview of safety
precautions that should be followed when installing and servicing MicroBlade Network
Modules.
Chapter 3: Setup and Installation
Refer here for details on installing the modules into a MicroBlade enclosure and for their
setup and configuration.
Chapter 4: Ethernet Modules
This chapter details all Ethernet switches for the MicroBlade system.
Appendix A: LED Descriptions
LED descriptions are summarized here in this appendix for quick reference.
MicroBlade Network Modules User’s Manual
iv
Notes
v
Table of Contents
Chapter 1 Introduction.......................................................................1-1
1-1 Overview.............................................................................................1-1
1-2 Product Checklist of Typical Components.....................................1-1
1-3 Features..............................................................................................1-1
1-4 Contacting Supermicro.....................................................................1-2
Chapter 2 Standardized Warning Statements.....................2-1
2-1 About Standardized Warning Statements......................................2-1
Warning Definition...................................................................................2-1
Installation Instructions ...........................................................................2-3
Circuit Breaker........................................................................................2-4
Power Disconnection Warning................................................................2-5
Equipment Installation.............................................................................2-6
Restricted Area.......................................................................................2-7
Battery Handling .....................................................................................2-9
Redundant Power Supplies ..................................................................2-10
Backplane Voltage................................................................................2-11
Comply with Local and National Electrical Codes.................................2-12
Product Disposal...................................................................................2-13
Hot Swap Fan Warning.........................................................................2-14
Power Cable and AC Adapter ..............................................................2-15
Chapter 3 Setup and Installation.................................................3-1
3-1 Installing/Removing a Switch Module............................................3-1
Installing a Switch Module ......................................................................3-1
Removing a Switch Module ....................................................................3-2
3-2 Configuring the Switch Module.......................................................3-3
Web-based Management Utility/IPMI .....................................................3-4
Network Connection.............................................................................3-4
Address Defaults..................................................................................3-6
3-3 Locating and Identifying Switches and Switch Ports
on a Blade Enclosure ..............................................................................3-7
Locating and Identifying a Switch on a Blade Enclosure ........................3-7
Locating and Identifying a Switch Port on a Blade Enclosure.................3-7
MicroBlade Network Modules User’s Manual
vi
Chapter 4 Ethernet Modules..........................................................4-1
4-1 MBM-GEM-001 Gigabit Ethernet Switch Module.........................4-1
LED Indicators ........................................................................................4-2
Ports........................................................................................................4-2
4-2 MBM-GEM-003i Gigabit Ethernet Switch Module........................4-3
LED Indicators ........................................................................................4-4
Ports........................................................................................................4-4
4-3 MBM-GEM-003s Gigabit Ethernet Switch Module.......................4-5
LED Indicators ........................................................................................4-6
Ports........................................................................................................4-6
Appendix A LED Descriptions......................................................A-1
A-1 MBM-GEM-001 Gigabit Ethernet Module LED Descriptions.....A-1
A-2 MBM-GEM-003i Gigabit Ethernet Module LED Descriptions....A-2
A-3 MBM-GEM-003s Gigabit Ethernet Module LED Descriptions...A-3
vii
List of Figures
Figure 3-1. Installing a Switch Module..............................................................3-1
Figure 3-2. Blade Enclosure with Switch Modules Installed..............................3-2
Figure 3-3. Configuring the Switch Module.......................................................3-3
Figure 3-4. Blade Status Screen.......................................................................3-4
Figure 3-5. Blade System Screen.....................................................................3-5
Figure 3-6. Gigabit Switch Panel.......................................................................3-5
Figure 4-1. MBM-GEM-001 Gigabit Ethernet Switch Module ...........................4-1
Figure 4-2. MBM-GEM-003i Gigabit Ethernet Switch Module...........................4-3
Figure 4-3. MBM-GEM-003s Gigabit Ethernet Switch Module..........................4-5
MicroBlade Network Modules User’s Manual
viii
Notes
v
List of Tables
Table 3-1. MBM-GEM-001 Switch Module Address Default Settings...............3-6
Table 3-2. Locating and Identifying a Switch ....................................................3-7
Table 3-3. MBE-628L Enclosures with MicroBlade Switches ...........................3-8
Table 4-1. MBM-GEM-001 Gigabit Ethernet Switch Module Interface..............4-1
Table 4-2. MBM-GEM-001 Gigabit Ethernet Switch Module Features .............4-2
Table 4-3. MBM-GEM-001 Gigabit Ethernet Switch Module Ports...................4-2
Table 4-4. MBM-GEM-003i Gigabit Ethernet Switch Module Interface.............4-3
Table 4-5. MBM-GEM-003i Gigabit Ethernet Switch Module Features.............4-4
Table 4-6. MBM-GEM-003i Gigabit Ethernet Switch Module Ports ..................4-4
Table 4-7. MBM-GEM-003s Gigabit Ethernet Switch Module Interface............4-5
Table 4-8. MBM-GEM-003s Gigabit Ethernet Switch Module Features............4-6
Table 4-9. MBM-GEM-003s Gigabit Ethernet Switch Module Ports .................4-6
Table A-1. MBM-GEM-001 Gigabit Ethernet Switch LED Indicators ................A-1
Table A-2. MBM-GEM-003i Gigabit Ethernet Switch LED Indicators................A-2
Table A-3. MBM-GEM-003s Gigabit Ethernet Switch LED Indicators...............A-3
MicroBlade Network Modules User’s Manual
vi
Notes
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Supermicro Routeur réseau
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité