superlum BroadLighter-M Series Manuel utilisateur
USER MANUAL
BroadLighter-M Series
Broadband Superluminescent Diode
Benchtop Light Source
Superlum, Unit B3, Fota Point Enterprise Park, Carrigtwohill, Co. Cork, Ireland.
Phone: +353 21 4533666, fax: +353 21 4533026, e-mail: sales@superlum.ie
www.superlumdiodes.com
Superlum reserves the right to change or make corrections to this manual further without notice.
Revision 16
June 2015
Declaration of Conformity
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Manufacturer’s Name: Superlum Diodes Ltd.
Manufacturer’s Address: Unit B3, Fota Point Enterprise Park
Carrigtwohill, Co Cork
Ireland
Declares that,
Product Name: Broadband Superluminescent Diode Benchtop Light
Source
Product Number: BroadLighter-M
Product Options: This declaration covers all options of the above
product(s).
This product complies with the following standards/ requirements:
EMC
Standard
Limit
IEC 61326-1:1997+A1:1998 / EN
61326-1:1997+A1:1998
Group 1 Class A
CISPR 11:1990 / EN 55011:1991
4kV CD, 8kV AD
IEC 61000-4-2:1995+A1:1998 /
EN 61000-4-2:1995
3 V/m, 80-1000
MHz
IEC 61000-4-3:1995 / EN 61000-
4-3:1995
0.5kV signal lines,
1kV power lines
IEC 61000-4-4:1995 / EN 61000-
4-4:1995
0.5 kV line-line, 1
kV line-ground
3V, 0.15-80 MHz
IEC 61000-4-5:1995 / EN 61000-
4-5:1995
0.5 kV line-line, 1
kV line-ground
IEC 61000-4-6:1996 / EN 61000-
4-6:1996
Dips: 30% 10ms;
60% 100ms
IEC 61000-4-11:1994 / EN
61000-4-11:1994
Interrupt >
95%@5000ms
The product was tested in a
typical configuration
Safety
IEC 61010-1:1990+A1:1992+A2:1995 /
N 61010-1:1993+A2:1995
Laser
Safety
IEC60825-1:2014
BroadLighter-M Series
User Manual
Revision 16
1
Certificate Exclusions
This Declaration, and all documentation, and all
equipment cited herein, shall cease to conform to and/or
be compliant with the above Directives, Standards and
Specifications unless the following conditions are
complied with and applied by the Purchaser /User:
This Product shall be installed, used and
maintained as directed by Superlum.
The Product shall not be modified and/or changed
without prior written approval of Superlum.
Although every effort is made by Superlum to comply with
the above Directives and Standards, itis the responsibility
of the Purchaser and/or User of the equipment to ensure
that all claims and assurances with regards to such
directives and Standards are complete, correct and
satisfied.
IEC 825-1
Warranty
2
Warranty
Warranty
Superlum warrants the BroadLighter-M Broadband SLD
Benchtop Light Source for a period of 12 months from the
date of shipment. During this warranty period Superlum
will repair / exchange any unit proven to be defective.
Repairs are warranted for the balance of the original
warranty period or at least 90 days.
For warranty repairs or service the unit must be
returned to Superlum at the customer’s expense.
Limitation of Warranty
Superlum will not accept liability for any incidental
damage caused by the failure of this product. This
warranty does NOT cover:
Any defect/damage caused by improper
operation.
Accompanying accessories, e.g. fiber optical
patchcables, AC power cords, etc.
Dismantling anypart of the unit without prior approval
from Superlum will void the warranty.
BroadLighter-M Series
User Manual
Revision 16
3
Statement of Calibration
Superlum certifies that this product has been inspected,
tested, and calibrated to meet its published specifications.
TABLE OF CONTENTS
4
TABLE OF CONTENTS
Warranty...................................................................... 2
TABLE OF CONTENTS ............................................... 4
Safety Symbols and Terms ........................................ 7
General Safety Information ........................................ 9
Acronyms and Abbreviations .................................. 20
1. General Information.............................................. 22
1.In This Manual …………………………………………………………….22
1.2 Instrument Description.................................................25
1.3 Product Specifications .................................................32
2. Installation............................................................. 35
2.1 Unpacking and Initial Inspection.................................35
2.1.1 Unpacking the Instrument................................35
2.1.2 Initial Inspection.................................................36
2.2 Preparation for Use......................................................38
3. Local Mode of Operation...................................... 40
3.1 Front-Panel Features...................................................40
BroadLighter-M Series
User Manual
Revision 16
5
3.2 Rear-Panel Features....................................................42
3.3 Operating Instructions..................................................44
3.4 Power OFF Instructions...............................................47
3.5 Interface Menu ..............................................................48
3.5.1 Main Interface Screen.......................................48
3.5.2 Main Screen Status Messages .......................52
3.5.3 Main Screen Status Indicators........................53
3.5.4 Main Menu..........................................................54
4. Remote Mode of Operation .................................. 57
4.1 Remote Control Interface............................................58
4.2 USB interface…............................................................60
4.2.1 System Commands...........................................62
4.2.2 USB Mode Commands.....................................64
4.3 Superlum Companion Software .................................77
4.3.1 Minimum System Requirements....................78
4.3.2 Installing the USB drivers................................79
4.3.3 Installing Companion Software......................80
6
4.3.4 User Interface ....................................................81
4.3.5 Self Test Procedure..........................................84
4.3.6 Uninstalling the Program..................................86
5. Cleaning Instructions ........................................... 87
5.1 Safety Precautions.......................................................87
5.2 Cleaning………………………………………………………….………….89
6. Service and Support ............................................ 92
6.1 Returning the Instrument for Servicing......................92
6.2 Preparing the Instrument for Shipment.....................93
6.3 Instrument Disposal......................................................95
BroadLighter-M Series
User Manual
Revision 16
7
Safety Symbols and Terms
This section deals with information on the safety symbols
and terms which are used on the instrument or in the
manual, and gives explanations about what they stand
for. These symbols and terms indicate precautions you
must strictly follow to safely operate the instrument.
Before you begin using your BroadLighter-M,
please read the following explanations:
The WARNING sign denotes a hazard. It
calls attention to a procedure, practice,
or the like, which, if not correctly
performed or adhered to, could result in
personal injury. Do not proceed beyond
a WARNING sign until the indicated
conditions are fully understood and
met.
The CAUTION sign denotes a hazard. It
calls attention to an operating procedure,
or the like, which, if not correctly performed
or adhered to, could result in damage to or
destruction of the entire product or part
thereof. Do not proceed beyond a
CAUTION sign until the indicated
conditions are fully understood and met.
WARNING
CAUTION
Table des matières
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur