Supera SMX10-1 Manuel utilisateur
SMX10-1, SMX20-1, SMX20-2, SMX30-1
MIXERS
INSTRUCTION MANUAL
This manual contains important information regarding your Supera® unit. Please read this manual thoroughly prior to equipment set-up, operation and mainte-
nance. Failure to comply with regular maintenance guidelines outlined in this manual may void the warranty.
MAIN EXTERNAL PARTS MIXER
1. Gear change hand lever
2. Stirring shaft
3. Mixer
4. Stainless barrel
5. Power switch
6. Bent lever
7. Safety guard (may choose the fitting)
8. Support
TECHNICAL PARAMETERS
DESCRIPTION
This is a type of changing speed gear mixer, with its planetary stirring design. It has
a compact structure, is highly efficient and power saving, and is easy to operate. It
will be provided to you as an ideal assistant for bread and cake making.
INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014
INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014
INSTALLATION
Ensure the location of the Planetary Mixer is capable of supporting its weight.
ASSEMBLY
WARNING: The Planetary Mixer is very heavy, care must be taken when moving it.
WARNING: The bowl must be attached and raised into position prior to starting
the Planetary Mixer.
We accept no responsibility for any injury caused by incorrect assembly of this appliance.
Note: Ensure the feet are level to reduce vibration during operation.
Remove the appliance from all packaging.
Fitting/Removing the Bowl
1. Turn Off the appliance.
2. Open the safety guard by turning it to the
left (SMX10-1, SMX20-1, & SMX20-2) or
lifting it above the mixer (SMX30-1).
3. Lower the bowl with the bowl handle.
4. Release the locking catches either side of the
bowl.
5. Lift the bowl. The bowl is held in place by two
pins securing the handles to the cradle and a
hole at the back of the appliance which houses
the lug on the bowl lip.
6. Reverse the procedure to fit the bowl.
Note: Ensure the handle is fully pushed back
and the bowl is completely raised or the
mixer will not work.
Changing the Mixer Attachment
1. Turn Off the appliance.
2. Open the safety guard by turning it to the left (SMX10-1, SMX20-1, & SMX20-2) or lifting it
above the mixer (SMX30-1).
3. Lower the bowl with the bowl handle.
4. Push the mixer attachment up and to the left to release it.
5. Insert the desired attachment. Push up and to the right to lock it into place.
6. Raise the bowl.
Note: Regularly grease the bowl lift mechanism to ensure smooth operation.
OPERATION INSTRUCTION
1. Standard power supply v/ HzAc. Plug in the unit into the proper outlet.
2. Set your unit to desired speed.
3. Install desired attachment. (Beater, Dough Hook, or Wire Whip)
4. Place bowl in proper place and check to make sure it is secure.
5. Raise the hand lever so that it in the highest position.
ACCESSORIES AND FUNCTIONS
1. Whisk: Light mixes, whipped cream, mayonnaise, egg whites,
pancakes and souffles. Recommended Speed: 1, 2, 3, Fast
2. Beater: Firm mixes, light pastry, cake/biscuit mix, icings, fillings, and
mashed vegetables. Recommended Speed: 1, 2, Medium
3. Spiral Dough Hook: Heavy mixes, dough, pie pastry, etc.
Recommended Speed: 1, Slow
NOTES
1. The power socket must be connected to a ground wire to guarantee optimal
operation. There is a strong risk of malfunction or shock if the mixer is not
grounded. The ground wire can never be connected to a gas pipe, water pipe,
lightning rod, or telephone line. After installation, have an electrician check for
electric leakage. If the power line is ever damaged, please consult a
professional electrician.
2. Don’t put your hand into the stirring barrel during operation. Power supply
should be disconnected before the mixer is going to be installed.
3. Don’t operate the mixer beyond the time limit. Doing so will reduce the life
of the unit.
4. The mixer should be mounted on a stable and clean place. Keep it away from
overheated or over-wet places and away from equipment which has strong
electromagnetic pull or can produce a strong electromagnetic pull.
©SUPERA V.1.0 | October 2014
INSTRUCTION
MANUAL
6.Once the hand lever is raised, close the Safety Guard completely. If Safety Guard
is not closed the mixer will not function.
7.To turn the unit on, press the GREEN power button.
8.To turn the unit off, press the RED power button.
To change the desired speed, press the RED power button to turn the unit
off. Move the hand lever into the lowest position. Select new desired speed.
Raise hand lever back into highest position. Press GREEN power button to
turn the unit back on.
We recommend the following uses for each attachment:
5. Keep the machine clean constantly. Disconnect power supply before
maintenance. Clean it with a piece of soft and damp cloth. Don’t clean it with
liquid or spraying detergent.
MAINTENANCE
The transmission gear box is greased in a factory, for best practice we recommend
checking the grease every 6 months. To add or refill grease, open the top cover,
then fill grease from aperture or replace the grease directly.
©SUPERA V.1.0 | October 2014
INSTRUCTION
MANUAL
Overload Switch
The Overload switch is situated at the
back of the machine beside the cable
entry. If the appliance becomes too
hot the Overload switch will stop the
machine automatically. If this
happens:
1. Turn Off the mixer.
2. Reduce the load in the mixing bowl.
3. Push the Overload switch back in to reset it.
4. Allow the appliance to cool for 20 minutes.
Note: In the event of a power cut the Overload switch will
cut in to prevent the appliance from restarting
automatically when power is restored.
Note: Always disconnect the Planetary Mixer from the mains
powers supply when not in use.
Overload
switch
•Always turn off the mixer and disconnect from the power supply before cleaning.
• Use warm soapy water to clean the bowl and mixing attachments. Do not use abrasive
cleaning chemicals as these can leave behind harmful residues.
• Clean the exterior of the appliance with a damp cloth.
• Dry all parts thoroughly after cleaning.
• Do not use jet/pressure washers to clean the appliance.
• Clean the appliance regularly.
TROUBLESHOOTING
WARNING!
If the equipment is out of function, please have it serviced by a professional.
©SUPERA V.1.0 | October 2014
INSTRUCTION
MANUAL
Fault Probable Cause Action
The appliance is not
working
The unit is not switched on Check the unit is plugged in
correctly and switched on
Turn button clockwise to releaseThe Stop button not released (HLM30)
Plug and lead are damaged Call agent or qualified
Technician
Fuse in the plug has blown Replace the fuse
Power supply Check power supply
The overload switch has activated See overload switch information in
the Operation section of this manual
Safety Guard not closed Close Safety Guard fully
Appliance not in gear Put in gear
Bowl not fully raised Ensure the Bowl lever is pushed
back fully
Bowl will not fit back in to
place
Bowl pins or surrounding area clogged
with mix
Clean the appliance
The appliance is
overheating
The mixing bowl is overloaded Turn off the appliance and empty
some of the contents
The appliance has been operating for too
long
Turn off the appliance and allow to
cool down for 30 minutes
The appliance is noisy Bowl or mixing attachment not
correctly fitted
Remove and refit bowl/mixing
attachment
Worn bearings/damaged gears Call agent or qualified
Technician
The mixing attachment
fails to rotate properly
The belt has become loose Call agent or qualified
Technician
Cannot select gear Gearing cogs misaligned Turn Off appliance and manually turn
the whisk attachment slightly. Select
the gear again.
PARTS OF SMX10-1
INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014
INSTRUCTION
MANUAL
©SUPERA V.1.0| October 2014
PARTS OF SMX20-1
INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014
INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Supera Mixer
