Sunstech ACTIONCAM10 Manuel utilisateur
1
1. DO NOT place objects on top of the device, as objects may scratch the
device.
2. DO NOT expose the device to dirty or dusty environments.
3. DO NOT place the device on an uneven or unstable surface.
4. DO NOT insert any foreign objects into the device.
5. DO NOT expose the device to strong magnetic or electrical field.
2
6. DO NOT expose the device to direct sunlight as it can damage the device.
Keep it away from heat sources.
7. DO NOT store your device in temperatures higher than 40°C(104°F). The
internal operating temperature for this device is from 20°C(68°F) to 60°C(140°F).
8. DO NOT use the device in the rain.
9. Please check with your Local Authority or retailer for proper disposal of
electronic products.
10. The device and adaptor may product some heat during normal operation of
charging. To prevent discomfort or injury from heat exposure, DO NOT leave the
3
device on your lap.
11. POWER INPUT RATING: Refer to the rating label on the device and be sure
that the power adaptor complies with the rating. Only use accessories specified
by the manufacturer.
12. Clean the device with a soft cloth. If needed, dampen the cloth slightly
before cleaning. Never use abrasives or cleaning solutions.
13. Always power off the device to install or remove external devices that do not
support hot-plug.
14. Disconnect the device from an electrical outlet and power off before cleaning
the device.
4
15.DO NOT disassemble the device. Only a certified service technician should
perform repair.
16. The device has apertures to disperse heat. DO NOT block the device
ventilation, the device may become hot and malfunction as a result.
17. Risk of explosion if battery replaced by an incorrect type. Dispose of used
batteries according to the instruction.
18. PLUGGABLE EQUIPMENT: the socket-outlet shall be installed near the
equipment and shall be easily accessible.
5
Function
Function
Thank you for choosing the ACTIONCAM 10. Please carefully read the manual before using, and keep
it at a safe place for future reference.
The compilation of the user manual refers to the latest information. The manual quotes captured screen
displays and graphics, with the aim to introduce the digital camera through detailed and direct methods.
Due to the differences of technical R&D and production batch, those captured screen displays and
graphics indicated in the manual may be different from that of actual digital camera.
Precautions
Precautions
NOTE: TF high-speed card (multimedia memory card) at Class 4 or above is
required.
Instructions for using the memory card
●In case of a newly purchased memory card for the first time use, or data available in the memory card
unrecognized for the camera or image captured by other cameras, please ensure to firstly format
the memory card;
●Before plugging in or out the memory card, please firstly disconnect power supply of the camera;
●After using for many times, performance of the memory card will be lowered. In case of lowered
performance, a new memory card is needed to purchase;
●The memory card is a precise electronic device. Please don’t bend it and keep it away from falling or
6
heavy load;
●Don’t keep the memory card in the environment with strong electromagnetic or magnetic field, like
the place near speaker or receiver of TV;
●Don’t use or keep the memory card in environment with over high or low temperature;
●Keep the memory card clean and away from contacting liquid. In case of contacting liquid, please dry
it with soft cloth;
●In case of keeping the memory card idle, place it into the card sleeve;
●Please note that the memory card will get hot after long-term use, and this is normal;
●Don’t use the memory card having used on other digital cameras. If to memory card on this camera,
please firstly format it with the camera;
●Don’t use the memory card having formatted on other camera or card reader;
●In case of one of the followings with the memory card, the recorded data may be damaged:
-Improper use of the memory card;
-Disconnect power supply or take the memory card out during recording, deleting (formatting) or
reading;
●You are recommended to backup important data on other media like soft disk, hard disk, CD.
Camera Maintenance
●Keep it in a dry and dark place for keeping idle;
●Use proper protective cover to avoid lens and display scratched;
●In case of cleaning the surface of camera lens, first blow the dust off the surface, use a
7
cloth or paper available to optical equipment to wipe the lens gently. Use the professional camera
cleanser to clean the lens. Do not use any organic solvent;
●Do not touch the lens surface by fingers.
System
System requirements
requirements
When operating or using the digital camera, please take minimum system requirements for the
computer of the camera into consideration. You are strongly recommended to use better computer
equipment for operating the camera to achieve the optimized effect. The minimum system
requirements are as below:
System Requirements
Operating
System
PCCAM
Microsoft Window XP(SP3), Vista, 7，8
Mac OS X ver: 10.8.0 or above version
MSDC
Microsoft Window 2000，XP, Vista, 7，8
Mac OS X ver: 10.0.0 or above version
CPU
Intel Pentium of more than 1GHz or other CPU with
equivalent performance
Internal Memory
Larger than 1GB
Sound Card and Display
Card
The sound card and video card shall support DirectX8 or
higher version.
CD Driver
Speed of 4 times or faster
Hard Disk
Free space of more than 2GB
Others
One standard USB1.1 or USB2.0 port
8
Appearance
Appearance
1. Busy indicator light(blue);
2. Shutter key；
3. Microphone ;
4. Charge indicator light(red);
5. MicroSD Card Slot;
6. Micro-USB Port;
7. Micro HDMI Port;
8. Infrared remote light
9. Len;
9
Removing
Removing the
the battery
battery from
from the
the camera
camera
1. LCD;
2. Up key；
3. Mode key;
4. Down key;
5. Power/menu key;
Table des matières
Langues :
