Sunjoe SWJ802E Guide d'installation

What is the size of the end nut holding the bar cover on my unit?

The end nut beneath the end nut cover that holds the bar cover on to your unit is a size 13mm

metric flange hex nut. Any 13mm socket or spanner wrench will be able to remove or tighten

this end nut.

What type of oil does my unit take?

Your Saw Joe SWJ802E uses regular Bar and Chain Oil, available for purchase on our website

under model number SWJ-OIL.

How do I clean debris/residue from inside the unit?

Using the supplied flat-tip blade screwdriver, remove the end cover nut cap from the

chain/sprocket end cover to expose the end cover nut.

Using the supplied hex key wrench, unscrew the end cover nut and remove the chain/sprocket

end cover.

Remove any debris trapped under the end cover, around the sprocket, and between the chain

links. If available, use compressed air to remove any fine debris from the mounting surface,

bar, and chain.

If necessary, remove the cutting bar and chain from the mounting surface to clean any

residue, then replace.

Replace the chain/sprocket end cover by inserting the rear tab of the end cover first into the

rear tab slot on the mounting surface, and position the cover onto the saw head.

Tighten the end cover nut by hand. Remove all slack from the chain by turning the chain

tension screw clockwise until the chain seats snugly against the bar with the drive links in the

bar groove.

Tighten the end cover nut using the hex key wrench, then replace the end cover nut cap to

secure the chain/sprocket end cover.

What bar does my unit use?

Your Saw Joe SWJ802E uses an SWJ-8BAR 8-inch bar, available for purchase on our website.

What chain does my unit use?

Your Saw Joe SWJ802E uses an SWJ-8CHAIN 8-inch chain, available for purchase on our

website.

How loud is my Saw Joe SWJ802E?

Your Saw Joe SWJ802E has a decibel rating of 105 dB.

FAQ

Protect ground level amenities (e.g. clear space over your swing-set, remove hazards from

above your carport, prevent debris from littering your pool, etc.)Instead of a traditional

chainsaw to cut bundles of branches or clean up broken tree limbs

No need for a smoke mask, ear protection, gas can, gasoline, 2-cycle oil, ethanol-shield fuel

additive, carburetor clean-out, sparkplug replacement, and seasonal fuel preservatives and

stabilizers. Avoid renting a bucket lift, scissor lift, or boom lift to safely reach tall limbs.

What is the file size for sharpening the chain on my Saw Joe Pole Saw?

Your Saw Joe Pole Saw uses an Oregon 91PX chain that is sharpened with a 5/32" sized file.

How do I adjust the chains tension?

Adjust tension with a screwdriver by turning the tensioning peg screw clockwise or

counterclockwise to achieve proper tension.

The correct tension is achieved when the chain in the middle of the bar can only be lifted by

approximately 3-4 mm.

What are the best uses for my SWJ802E Pole Chain Saw?

Cut hanging branches over walkways and entrance ways

Get rid of branches too close to your roof to protect your home in advance of weather hazards

Safely trim limbs hanging in rain gutters to prevent clogging and damage

Trim away overgrown branches on trees to beautify your property and create a cleaner,

brighter and more spacious outdoor living space

Cut branches that block sunlight from nourishing your garden and flower beds

As a quicker and safer alternative to using a ladder and a hand saw

Looking for dependable power tools? Rely on Sun Joe for quality and long-lasting products.

Autres manuels pour SWJ802E

2

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels sunjoe Tronçonneuse

sunjoe

sunjoe 20ViONLTE-CS10-RM Manuel utilisateur

sunjoe

sunjoe SWJ802E Manuel utilisateur

sunjoe

sunjoe SWJ699E Manuel utilisateur

sunjoe

sunjoe SWJ807E Manuel utilisateur

sunjoe

sunjoe SWJ806E Manuel utilisateur

sunjoe

sunjoe 24V-X2-CS16-RM Manuel utilisateur

sunjoe

sunjoe SWJ803E Manuel utilisateur

sunjoe

sunjoe SWJ599E Manuel utilisateur

sunjoe

sunjoe SWJ800E Manuel utilisateur

sunjoe

sunjoe SWJ700E Manuel utilisateur

sunjoe

sunjoe iON16CS Manuel utilisateur

sunjoe

sunjoe SWJ698E Manuel utilisateur

sunjoe

sunjoe iON100V-18CS-CT Manuel utilisateur

sunjoe

sunjoe SWJ599E Manuel utilisateur

sunjoe

sunjoe 24V-PS10-LTE Manuel utilisateur

sunjoe

sunjoe SWJ806E Manuel utilisateur

sunjoe

sunjoe SWJ803E Manuel utilisateur

sunjoe

sunjoe SWJ701E Saw Joe Manuel utilisateur

sunjoe

sunjoe 20ViONLTE-CS10 Manuel utilisateur

sunjoe

sunjoe SWJ699E-RM Manuel utilisateur

sunjoe

sunjoe iON100V-18CS-CT-RM Manuel utilisateur

sunjoe

sunjoe 24V-PS8-CT-RM Manuel utilisateur

sunjoe

sunjoe SWJ800E-RM Manuel utilisateur

sunjoe

sunjoe SWJ698E Manuel utilisateur

Manuels Tronçonneuse populaires d'autres marques

Bushranger

Bushranger CS4210 Manuel utilisateur

Husqvarna

Husqvarna 136, 141 Manuel utilisateur

Echo

Echo CS-330EVL Manuel utilisateur

HART

HART HLCS01 Manuel utilisateur

Homelite

Homelite UH10817 Manuel utilisateur

Westfalia

Westfalia SCS 725 Manuel utilisateur

Nakayama

Nakayama EC2050 Manuel utilisateur

The Handy

The Handy THPCS16 Manuel utilisateur

McCulloch

McCulloch PRO MAC 54 Manuel

Husqvarna

Husqvarna 359 E-tech Manuel utilisateur

Craftsman

Craftsman 358.352162 Manuel utilisateur

Craftsman

Craftsman 358.350270 Manuel utilisateur

Craftsman

Craftsman 358.351610 Manuel utilisateur

Echo

Echo CS-8001(6digits)(36) Mode d’emploi

Poulan Pro

Poulan Pro 545047544 Manuel utilisateur

Ryobi

Ryobi RY3714VNM Manuel utilisateur

Homelite

Homelite Ranger UT10926 Manuel utilisateur

McCulloch

McCulloch TimberBear TM502 Manuel utilisateur