Sunitec BC370 Manuel utilisateur
Multi-Function Button(MF-button)
6
6
6
Volume decrease(-) Button
5
Volume increase(+) Button
4
Mute Button
2
6
Led indicator
3
3
3
3
Microphone
7
Speaker
1
USB charging port
8
8
8
3. The red LED indicator ③ on the Car Kit will light up
and your Car Kit will start charging.When fully
charged, the red LED indicator ③ will turn OFF
Attention! Make sure that the Bluetooth Car Kit is
fully charged before using the device.
®
for more than 30 minutes.
®
®
FIRST USE PAIRING
You are required to pair the Bluetooth Car Kit
with your mobile phone once before using it!
Make sure that the Bluetooth Car Kit is
turned OFF.
→ Press and hold the MF-button ⑥ until the LED
indicator ③ starts flashing by blue and orange
colors alternately.
→ Let your phone search for Bluetooth devices.
→ Select the BC370 Car kit / BC370B Car kit in
your mobile phone and enter the PIN code 0000
(*) to pair both devices. You will hear a beep.
→ The blue LED indicator ③ will light.
(*) Not required if your phone has Bluetooth
version 2.1 or higher
®
®
®
Attention!
• Make sure that the Bluetooth function of your
mobile phone is ON and that it is in close proximity
to the BluetoothCar Kit.
• To ensure automatic reconnection between the
phone and the Bluetooth Car Kit, we recommend
setting the Bluetooth Car Kit as “Authorized” in
the Bluetooth menu of your phone! Please refer
to the manual of your mobile phone for more
detailed information.
• If the Bluetooth connection is not restored
automatically after disconnection, you can always
restore the connection manually in the menu of
your mobile phone.
6
6
6
6
®
®
®
®
®
®
Attention!
The Bluetooth Car Kit will turn OFF automatically if
there has been no Bluetooth connection between
the Bluetooth Car Kit and another mobile device
®
®
4
5
2
2
4
5
3
BC370 / BC370B
®
(BC370) (BC370B)
MULTIPOINT Bluetooth
Bluetooth Car Kit supports MULTIPOINT
connection, which allows you to connect and use 2
different Bluetooth telephones AT THE SAME
TIME with your Car Kit.
When 2 phones are connected to the Bluetooth
Car Kit you always have:
• Primary phone (1st phone connected to the Car
Kit)
• Secondary phone (2nd phone connected to the
Car Kit)
Attention!
NO Voice dial, NO redial possible for 2nd phone.
Multipoint pairing procedure
► PAIRING phone 1
Pair the 1st phone with the Bluetooth Car Kit as
described under “FIRST USE PAIRING”. → Connect
the phone to the Car Kit.
► PAIRING phone 2
Make sure Bluetooth Car Kit. → Press and hold the
MF-button ⑥ of the Bluetooth Car Kit to enter
pairing mode again. The blue & red indicators will
flash alternately. → Pair and connect with the 2nd
phone.
Attention !
After the 2nd phone is paired and connected, the 1st
phone will be DISCONNECTED from the Car Kit.
→ Turn OFF the Bluetooth Car Kit and then turn
ON again, using the MF-button ⑥.
→Bluetooth Car Kit will reconnect with both phones
automatically.
Multipoint Connection Procedure
When the Bluetooth Car Kit is switched ON, it will
automatically search and connect with the 2 last
mobile phones that had Bluetooth connection with
the Car Kit.
► If only 1 phone is available: only one phone will
be connected to the Bluetooth Car Kit. This phone
will be the primary phone.
► One or both phones are shortly disconnected:
the Car Kit will automatically reconnect.
Attention!
To ensure automatic reconnection between the
phones and the Bluetooth Car Kit, we recommend
setting the Bluetooth Car Kit as “Authorized” in the
Bluetoothmenu of your phone! Please refer to the
manual of your mobile phone for more detailed
information.
If for any reason one of the 2 phones, or both
phones, will spontaneously lose the Bluetooth
connection with the Bluetooth Car Kit, it will
automatically make a reconnection. If this automatic
reconnection fails, you can always restore the
Bluetooth connection manually in the menu of
your mobile phone.
Now you can:
► Answer the incoming call on 2nd phone: Press
the MF-button ⑥ twice to HOLD the call on the
1st phone and answer the call on the 2nd phone.
When you have accepted the 2nd call, you can:
► Switch between 2 phones: Press the MF-button
⑥ twice to switch between the 2 phones.
► End one of thecalls: Press the MF-button ⑥
once to end the current call and continue with the
other call.
LED INDICATOR ③
Red indicator:
►Flashes in Standby mode: low battery capacity.
►Lights continuously while charging the battery.
►Lights continuously in mute mode.
Blue indicator:
►Flashes in Standby mode & talking mode.
Orange & Blue indicators:
►Flash alternately in pairing mode.
MICROPHONE ⑦
Make sure that the microphone⑦ is directed
towards your mouth. For optimum performance,
the microphone ⑦ should be located at a distance
of 30-50 cm from the driver’s mouth. Make sure
that there are no obstacles in front of the
microphone ⑦ of the Bluetooth Car Kit.
MUSIC STREAMING
Once your mobile phone and theBluetooth Car
Kit have been paired and connected, you can
stream music from your phone to the Bluetooth
Car Kit. The music will be muted automatically
during a call.
LOW VOLTAGE PROTECTION OF BATTERY
When the battery voltage drops to 3.3V, the red
LED ③will flash during Standby mode; and the
Bluetooth Car Kit would be shutdown
automatically when the battery voltage is
below 3.0V.
RESET TO DEFAULT SETTING
Press the “-”⑤ and “+”④ buttons at the same time
for 10 seconds until you hear a beep and the LED
indicator ③ starts flashing by blue and red colors
alternately. Your unit has now been reset to default
settings.
Receiving calls on the 2 phones
If during a telephone conversation another
incoming call is received on the 2nd phone, you
will hear a BEEP.
®
650
45
10 60
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
Ce manuel convient aux modèles suivants
1
Autres manuels Sunitec Accessoires automobiles
