4. “ ” Touch icon for knife pressure test. Corresponding to the
machine's knife pressure test, after setting the knife pressure, move the carriage knife
holder to the material and press the "Knife Pressure Test" icon, the machine will make a
small test cut. At this point, you can tear it open to see the cutting effect. If the cutting
effect is not perfect, you need to adjust the blade tip and knife pressure until the cutting
effect is perfect.
5. “ ” Touch icon for speed/pressure. Corresponding to the machine's
cutting speed and cutting knife pressure. Click to enter the settings, as shown below:
After setting the speed/pressure, press “ ”or“ ” to return to the
main page. The corresponding area on the main page menu will also display the
