Sunbeam EM0480 Manuel utilisateur
Product Improvement Centre
EM0480 Recalibration Guide
Page 1 of 3
Step 1
Ensure the coffee grinder is switched off and
unplugged from the power outlet. Remove the
bean hopper from the motor base, push down
and turn anti-clockwise, see figure 1.
Step 2
To remove the top burr turn the grind
adjustment collar in an anti-clockwise
direction until it stops, see figure 2.
Note: The top burr can only be removed
when graphic arrow on the grind adjustment
collar is aligned with the arrow on the motor
base.
Step 3
Press and hold down the “UNLOCK” button at
the rear of the motor base and with the other
hand turn the grind adjustment collar anti-
clockwise until the graphic arrow on the collar is
aligned with the arrow on the motor base, see
figure 3.
Figure 1
Figure 2
Figure 3
Product Improvement Centre
EM0480 Recalibration Guide
Page 2 of 3
Step 4
Lift out the top burr from the grind adjustment
collar using the handle, see figure 4.
Step 5
Lift the grind adjustment collar away from the
motor base.
Step 6
Using a 10mm spanner or
socket, unscrew the cap nut in a
clockwise direction.
Tip: To hold the bottom burr in
place while unscrewing the cap
nut, insert a screw driver into the
unit and press it against the burr.
Figure 4
Figure 5
Product Improvement Centre
EM0480 Recalibration Guide
Page 3 of 3
Step 7
Remove the star washer, burr
blade and the lower burr.
Step 8
Add a spacer to make the grind
finer or remove a spacer to make
the grind coarser.
Note: One spacer is
approximately equivalent to 7
graduations on the grind
adjustment collar.
For assembly repeat the above
steps in reverse order.
Caution: During assembly and before securing the lower burr,
ensure the burr location hole is aligned with the burr location pin.
Autres manuels pour EM0480
2
Table des matières
Autres manuels Sunbeam Moulin à café
Sunbeam
Sunbeam EM0480 Manuel utilisateur
Sunbeam
Sunbeam AutoGrinder EM0415 Manuel utilisateur
Sunbeam
Sunbeam EM0500 Manuel utilisateur
Sunbeam
Sunbeam GrindMaster EM0360 Manuel de service
Sunbeam
Sunbeam EM0400 Manuel utilisateur
Sunbeam
Sunbeam EM0700 Manuel utilisateur
Sunbeam
Sunbeam EM0450 Manuel utilisateur
Sunbeam
Sunbeam AutoGrinder EM0410 Manuel utilisateur
Sunbeam
Sunbeam AutoGrinder EM0420 Manuel utilisateur
Sunbeam
Sunbeam EM0480 Manuel utilisateur
