7
ATTENTION: Make sure that the power line AC voltage is the same
selected on the amplifier. The warranty does not cover damages resulting from
using the device on the wrong voltage. Also check the fuse proper to use on
page’s 4 table.
Your Z Séries amplifier will protect it self when connected to the wrong
voltage, by burning a safety device in its interior. In this case, your amplifier
will refuse to turn-on again. You must contact our technical assistance in
order to substitute the safety device and use your amplifier again.
NOTE THAT THE TABLE VALUES WERE CALCULATED FOR 110 VOLTS, WITH A
SETTING BETTER THAN 5% (WHICH IS A SATISFACTORY SETTING), ON AN
INSTALLATION WITH NO MORE THAN 50 METERS BETWEEN THE POWER FRAME
AND THE AMPLIFIER. AS TO THE 220-V LINE, WE CAN USE UP TO HALF THE
GAUGE.
When longer distance connections are required, such as for example 100 meters
(double the distance), we should use double the gauge as well.
In case of a sound system leasing company, where music is generally reproduced,
we should always size the AC system for the PINK NOISE rate:
PINK NOISE Z.300 Z.500 Z.700 Z.900 Z1200 Z1600
2 speakers p/ channel 0,5mm21mm21,5mm22mm22mm22,5mm2
1 speaker p/ channel 0,4mm20,5mm21mm21,5mm21,5mm22mm2
ROCK WITH
COMPRESSION
Z.300 Z.500 Z.700 Z.900 Z1200 Z1600
2 speakers p/ channel 0,5mm21mm21,5mm21,5mm22mm22mm2
1 speaker p/ channel 0,4mm20,5mm21mm21mm21,5mm21,5mm2
AMBIENT MUSIC Z.300 Z.500 Z.700 Z.900 Z1200 Z1600
2 speakers p/ channel 0,4mm21mm21mm21,5mm21,5mm22mm2
1 speaker p/ channel 0,3mm20,5mm20,6mm21mm21,5mm21,5mm2
All of the Studio R Z Series amplifiers come with a power cable and
connector. The user should consult the consumption table and, according to the
intended use of his/her equipment, purchase the female connector with the
appropriate capacity for the extension.
