Strong SR-WMS Series Manuel utilisateur

SR-WMS Wall Mount Series

Fully Assembled Rack with Swing & Door

Package Contents

A. Fully Assembled Rack (1)

B. 5/16” Lag Bolts and Washers (4)

C. Mounting Template (1)

D. Keys - Front Door (2) & Swing/Side Panel (2)

E. #10-32 Rack Screws (40)

F. Door Shim Washers (3)

Key Features

• Full kit (rack swing and glass door included)

• Arrives fully assembled

• Universal hinges (number of hinges may vary by rack

height)

• Wire management (knock out on top of rack and swing

allows for ample room to manage cable)

• Front door, side panels, and swing are lockable

• Rails are labeled with U units for ease of arrangement

• EIA 310-D hole pattern

• Easily add fans for additional cooling (not included)

• Reversible door and swing

To ground cabinet, connect the ground wire to the

field wiring ground terminal on the bottom panel

first. Then connect bonding wires from grounded

frame to bonding terminals on main chassis, side

panels and doors. To ground, or bond use UL

Listed closed loop connectors with minimum 12

AWG wire 1/4” zinc plated steel or stainless steel

internal tooth washer, and an M6 nut. If grounding and

bonding is not completed in installation, then all parts

are considered not effectively grounded or bonded.

Reversing Front Door Swing

Tools required: #2 Phillips Screwdriver

1. Open the door and pull the hinge pins free, then slide the door out of the rack. (Fig. 1)

2. Move the grommet in the bottom hinge hole to the opposite side. (Fig. 2)

3. Flip the door and attach it to the opposite side of the rack (latch will be upside down). (Fig. 1)

4. Remove the door latch screw and bracket, rotate the outer handle 180°, then reassemble. (Fig. 3A)

5. Remove the locking latch screw and rotate the latch 180°, then reassemble. (Fig. 3B)

Fig. 3

Fig. 2Fig. 1

Reversing Rear Swing Direction

Tools required: #2 Phillips Screwdriver, 1/4” drive ratchet wrench with 3” extension, 10mm standard depth socket, 10mm

open-ended wrench, adjustable wrench or pliers

1. Using the included key, unlock the latch on the rear swing frame and remove the frame from the rack.

2. Using a 10mm wrench, loosen the alignment spikes from one side of the rack and move them to the corre-

sponding holes on the opposite side. (Fig. 4)

3. Using a 10mm socket wrench with a 3” extension, loosen the hinge nuts from the inside of the rack, taking

care not to lose the lock washers behind the nuts. (Fig. 5)

4. Reattach the hinges to the opposite side, making sure to keep the pins pointed down.

5. Move on to the rear swing frame. Move the hinges to the opposite side (same steps as rack).

6. Using a #2 Phillips screwdriver, remove the arm from the latch, then remove the lock ring, using pliers or an

adjustable wrench as needed.

7. Install the latch into the opposite mounting hole. Note the latching arm orientation in the gure. The latch ro-

tates up or down depending on which side it is installed in.

Fig. 4

Fig. 4 Fig. 4

Fig. 5

Product Max Load Weight with

Swing Kit

A - Height B - Width C - Depth D - Rail-to-rail

Mounting Depth

SR-WMS-6U

150 lb

14.29"

21.75" 22.91" 14"

SR-WMS-10U 21.29"

SR-WMS-12U 24.79"

SR-WMS-16U 31.79"

SR-WMS-18U

300 lb

35.29"

SR-WMS-21U 40.54"

SR-WMS-24U 45.79"

Note: Welded steel construction with deep black powder coat and tinted, tempered glass door.

** Ensure that installation is in accordance with ANSI/NFPA 70, National Electrical Code (NEC).

*** Equipment cabinets are intended to house or mount certified equipment that is provided with its

own fire and electrical enclosure.

Top

Front Back

Side

16”

3”

2.68”

Dimensions

180116-0425

Lifetime Limited Warranty

All StrongTM products have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found

to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have

been abused, modied, or disassembled. Products to be repaired under this warranty must be returned to Strong or a designated

service center with prior notication and an assigned return authorization number (RA).

For Technical Support: 1.866.838.5052

Ce manuel convient aux modèles suivants

Autres manuels Strong Support et étagère

Strong

Strong SM-PAD-LIFE Manuel utilisateur

Strong

Strong VersaBox SM-RBX-PRO-20-BLK Manuel utilisateur

Strong

Strong Strong Razor Series Manuel utilisateur

Strong

Strong SR-WM-PPH Series Manuel utilisateur

Strong

Strong SR-CAB-8U Manuel utilisateur

Strong

Strong SM-CEILING-T-L Manuel utilisateur

Strong

Strong SR-WM-10U Manuel utilisateur

Strong

Strong FS Series Manuel d'exploitation

Strong

Strong Strong Razor Series Manuel utilisateur

Strong

Strong Carbon Series Manuel utilisateur

Strong

Strong Contractor Series Manuel utilisateur

Strong

Strong VersaBox SM-RBX-PRO-14-BLK Manuel utilisateur

Strong

Strong SR-CUSTOM Series Manuel utilisateur

Strong

Strong Strong VersaMount SM-VM-ART2-IW-XL Manuel utilisateur

Strong

Strong SM-CBP Series Manuel utilisateur

Strong

Strong Strong Razor Series Manuel utilisateur

Strong

Strong SR-WM-SK-19 Manuel utilisateur

Strong

Strong Strong Razor Series Manuel utilisateur

Strong

Strong SM-CB-F-L Manuel utilisateur

Strong

Strong SR-CUSTOM Series Manuel utilisateur

Strong

Strong SM-FLAT-S Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur