User Manual System Setup
support.strivr.com 6
Storage Space
To ensure proper cooling:
• Never stack any of the electronic components on top of each other.
• Do not store in or on insulated/fabric areas.
• Do not store in direct sunlight.
If your system came with plastic bins for storage and transportation of the headsets, place each headset-
controller pair inside a section of the bin. Leave the Management Device and USB hub outside of the bins in
a permanent location.
Product Care & Maintenance
Powering on the Headset
To turn the headset on, press and hold down
the power button located on the top of the
headset for about 5 seconds or until the
indicator light next to the power button turns
blue. To check to see that it is powered on,
hold the headset up to your eyes and the
screen inside will illuminate. If the power
button is accidentally pressed during training,
the display will go to sleep. Short press it
again to turn the display back on and resume
training.
Volume
control
Power
Pico G2 Headset - Underside
Indicator
light Side strap
Charging port
Headphone
jack
15. If needed, check your final setup against the full schematic below:
