DOCUMENT NUMBER:
L500-912850 ISSUE DEC 20, 2016
AMENDMENT: 02
DATE: OCT 10, 2018
CHAPTERPAGE 03
AIRCRAFT MAINTENANCE MANUAL STEMME S10, VARIANT S12
0.1 RECORD OF AMENDMENTS
Any revision of the present manual must be recorded in the following table, with the exception of:
• Installation status of optional equipment, for optional equipment refer to section 9,
•
Amendments to the original ROTAX Maintenance Manual for the ROTAX 914 F (refer to
Annex E).
The record of amendments in section 0.1and the list of eective pages in section 0.2 are
assigned to an individual aircraft serial number. The indicated amendment no. in the feed line of
these pages does not change with entries after delivery of the aircraft.
Revision of pages must be endorsed in the following list. Necessary amendments, needs to be
mandatory included in the present manual.
The new or amended text will be marked on the revised page by a black vertical line on the right
hand margin;the amendment number and the date will be shown in the outside of the footer page.
The inspector certies by his signature the correspondence of this individual Aircraft Maintenance
Manual and the following list with the aircraft designated by serial number.
Any modication or correction within the approved sections must be signed by the Competent
Authority. Information about amendments which must be inserted in this Manual, are given in
the Record of Airworthiness Directives and Service Bulletins (refer to Annex B).
The original ROTAX Maintenance Manual for the ROTAX 914 F is separately revised by BRP-ROTAX®
GmbH & Co.KG, Austria (refer to Annex E).
The insertion must be signed by the performing person. The actuality and correct insertion of
amendments will be check during the annual airworthiness review.
Am.
No.
Removed
Pages
Inserted
Pages
Date of
Amendment
Reference Approval Date of
Insertion
Signature
00 -- Initial Issue DEC 20, 2016 P061-2017-016
01
0-1, 0-3,
0-5,0-7, 0-8
2-1, 6-4, 6-5,
6-6, 6-7,
6-10,
8-1, D-9
0-1, 0-3,
0-5,0-7, 0-8
2-1, 6-4, 6-5,
6-6, 6-7,
6-10,
8-1, D-9
AUG 28, 2017 P061-2017-094
