Stelpro STE302P Manuel utilisateur

INSSTE302P0514

For further information or to consult this guide online, please visit our website at www.stelpro.com

USER’S GUIDE

STE302P

MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT

Energy Veried

INSSTE302P0514

WARNING

Before installing and operating this product, the owner and/or installer must read, understand

and follow these instructions and keep them handy for future reference. If these instructions are

not followed, the warranty will be considered null and void and the manufacturer deems no further

responsibility for this product. Moreover, the following instructions must be adhered

to in order to avoid personal injuries or property damages, serious injuries

and potentially fatal electric shocks. All electric connections must be made by a qualied

electrician, according to the electric and building codes effective in your region. Do NOT

connect this product to a supply source other than 120 VAC or 240 VAC, and do not exceed the load

limits specied. Protect the heating system with the appropriate circuit breaker or fuse. You must

regularly clean dirt accumulations on the thermostat. Do NOT use uid to clean thermostat air vent. Do

not install thermostat in a wet place. However, installing it in isolated walls is allowed.

Note:

When a part of the product specification must be changed to improve operability or other functions,

priority is given to the product specification itself. In such instances, the instruction manual may not

entirely match all the functions of the actual product.

Therefore, the actual product and packaging, as well as the name and illustration, may differ from the

manual.

The screen/LCD display shown as an example in this manual may be different from the actual screen/

LCD display.

INSSTE302P0514

The multiple programming electronic thermostat STE302P can be used to control electric heating units

such as electric baseboards, convectors, or aeroconvectors. It keeps the temperature of a room at

the requested set point with a high degree of accuracy. This product is designed for installations with

electrical current – with a resistive load – ranging from 1.25 A to 12.5 A (120/240 VAC). It possesses a

user-friendly interface. Furthermore, it gives you the possibility to control the temperature of a room with

great precision.

This thermostat is not compatible with the following installations:

• electrical current higher than 12.5 A with a resistive load

(3000 W @ 240 VAC and 1500 W @ 120 VAC);

• electrical current lower than 1.25 A with a resistive load

(300 W @ 240 VAC and 150 W @ 120 VAC); and

• central heating system.

Parts supplied:

• one (1) thermostat;

• wall mounting plate located at the back of the thermostat;

• two (2) mounting screws;

• two (2) solderless connectors suitable for copper wires.

DESCRIPTION

INSTALLATION

Selection of the thermostat location

The thermostat must be mounted to a connection box on a wall facing the heating unit, at around 1.5 m

(5 feet) above the oor level, on a section of the wall exempt from pipes or air ducts.

Do not install the thermostat in a location where temperature measurements could be altered. For

example:

• close to a window, on an external wall, or close to a door leading outside;

• exposed directly to the light or heat of the sun, a lamp, a replace or any other heat source;

• close or in front of an air outlet;

• close to concealed ducts or a chimney; and

• in a location with poor air ow (e.g. behind a door), or with frequent air drafts (e.g. head of stairs).

INSSTE302P0514

Thermostat mounting and connection

1. Cut off power supply on lead wires at the electrical panel in order to avoid any risk of electric

shock.

2. Ensure that the air vents of the thermostat are clean and clear of any obstruction.

3. Using a screwdriver, loosen the screw retaining the mounting base of the thermostat until it is loose

(do not completely remove the screw).

Then, remove the mounting base at the back of the thermostat by pushing it downwards and then

towards you.

4. Align and secure the mounting base to the connection box using the two screws supplied.

INSSTE302P0514

5. Pass the wires from the wall through the opening on the mounting base and connect them using the

supplied solderless connectors. When making the connection with aluminum wire, make sure that you

are using connectors identied CO/AL. Please note that the thermostat wires do not have polarity.

Therefore, the way they are connected is not important.

2-WIRE INSTALLATION

4-WIRE INSTALLATION

INSSTE302P0514

6. Place all the wires into the connection box.

7. Align the little slots located on the top of the thermostat with those on the mounting base and secure

the thermostat to the mounting base. Note that you can also position the thermostat on the left or the

right side of the junction box. Then, tighten the screw at the bottom of the unit.

8. Turn on the power.

9. Set the thermostat to the desired setting (see the following section).

Alignment

INSSTE302P0514

The multiple programming thermostat has three main operating modes: Manual ( ), Automatic (

) and Preprogrammed ( ). The active mode is displayed at the bottom of the screen.

The transition from one mode to another is done by pressing down the button, out of any

adjustment mode.

Note: it is impossible to change the operation mode when the Security mode is activated.

When rst powered up, the thermostat is initially in degrees Celsius, in Preprogrammed mode

(preprogramming 5), and the Anticipated start mode is activated. The clock is adjusted to Saturday (12:00)

and ashes to indicate that an adjustment is necessary. The preprogramming is effective immediately.

OPERATION

Ambient temperature

Heating power

indicator

Security mode

Fan mode

+ button (to increase)

Mode (Manual;

Automatic;

Preprogrammed

Programming period

Anticipated start

Hour

Frost-free warning

- button (to decrease)

Mode button

Clock button

Days (L/M : Monday,

M/T : Tuesday,

M/W : Wednesday,

J/T : Thursday,

V/F : Friday,

S/S : Saturday and

D/S : Sunday)

INSSTE302P0514

Adjustment of the hour and the day

To adjust the hour and the day:

1. In any mode (Manual, Automatic or Prepro grammed), out of any adjustment mode, press down the

button and release it.

2. The current time mode (24H/12H) is displayed. Press down the or button to select the desired

format. Press down the button to conrm your choice.

3. The two hour digits ash. Adjust the hours using the and buttons. Press down the button

to conrm your choice.

4. The two minute digits ash. Adjust the minutes using the and buttons. Press down the

button to conrm your choice.

5. The day of the week ashes. Adjust using the and buttons. Press down the button to

conrm your choice.

The adjustment is thus completed and the thermostat returns to normal operation.

It is possible to exit the hour and day adjustment mode at any time:

• By pressing down the button.

• By not pressing down any buttons during 1 minute.

In case of a power failure lasting less than 2 hours, the thermostat saves the adjustment of the hour and

the day of the week. When the power is restored after an extensive failure, the hour will blink, indicating

that it must be readjusted.

Ambient temperature

The gures displayed above the hour indicate the ambient temperature. It can be displayed in degrees

Celsius or Fahrenheit (see “Display in degrees Celsius/Fahrenheit”).

To adjust the set point, out of any adjustment mode, press down the button to increase the set point (it

will blink), or the button to decrease it. Set points can only be adjusted by increments of 0.5°C (1°F).

To quickly scroll through the set point values, press and hold down the button. The minimum set point is

3°C (37°F), and the maximum set point is 30°C (86°F).

To return to the ambient temperature, do not press down any buttons for 3 seconds or press down both

and buttons simultaneously. You can turn off the thermostat by lowering the set point below 3°C

(37°F). The set point value displayed will be --.-, and heating system start up will be impossible.

INSSTE302P0514

Display in either degrees Celsius/Fahrenheit

The thermostat can display the ambient temperature and the set point in degrees Celsius (standard

factory setting) or Fahrenheit.

1. In any mode (Manual, Automatic or Preprogrammed), out of any adjustment mode, press down the

button for 3 seconds and release it. The various icons and options appear and °C or °F icon

ashes.

2. Press down the button to conrm your choice.

3. Press down the or button to switch from degrees Celsius to Fahrenheit. Press down the

button to conrm your choice.

The adjustment is thus completed and the thermostat returns to normal operation.

It is possible to exit the degrees Celsius/Fahrenheit adjustment mode at any time:

• By pressing down the button.

• By not pressing down any buttons during 1 minute.

In any case, the adjustment is saved.

Manual mode ( )

From the Manual mode, you can manually adjust the thermostat set point by pressing down the or

button to increase the value, or to decrease it. To quickly scroll through the set point values, press and

hold down the button. The standard factory set point adjustment is 21°C. From this mode, the screen

displays the temperature, the heating power used, the hour and the day of the week.

Automatic mode ( )

From the Automatic mode, the thermostat adjusts the set points according to the programmed periods.

If no data was entered, the thermostat acts the same way as from the Manual mode and the standard

factory set point adjustment is 21°C. It is always possible to manually adjust the set point using the

or button. The selected set point will be effective until one period is programmed, which represents

an hour and a day of the week. Note that if the set point is lowered to off (--.-), the programming will

not be effective. It is possible to program 4 periods a day during the week and 4 periods a day during

the weekend, which means that the set point can change automatically up to 4 times a day. The period

order is not important.

From this mode, the screen displays the temperature, the heating power used, the hour, the day of the

week and the current programmed period number ( to ; displayed on the right-hand side of the

hour).

INSSTE302P0514

Programming procedure of the Automatic mode

Programming the Automatic mode can be done in the Automatic mode or the Manual mode.

1. Out of any adjustment mode, press down the button during 3 seconds and release it. It then enters

into the programming of period 1 of the 5 days of the week. The 5 days of the week (L/M, M/T, M/W,

J/T, V/F), the period 1 ( ) and the associated programming (hours and set point) are displayed.

Note that the time displays --:-- and the set point displays --.-- if there is no programming for the period.

Note: if no programming is required for the period, simply press down the button. It then

automatically switches to the next adjustment period.

2. The two hour digits of the period ash and can then be adjusted with the and buttons. Conrm

the adjustment using the button.

3. The two minute digits of the period ash. Use the and buttons to adjust by intervals of 15

minutes. Conrm the adjustment by pressing down the button.

4. The set point temperature of the period is ashing. Adjust the set point using the and buttons.

Conrm your selection by pressing down the button.

5. The programming of this period is over. The programming of the next period is displayed and you

return to step 2.

6. At the end of the programming of the 4 periods of the week days, you enter into the programming

period 1 of the two days of the weekend. The two days of the weekend (S/S, D/S), the period 1 and

the associated programming (hours and set point) are displayed. The programming of the weekend

periods is made in the same manner as for the periods of the week days (steps 2 to 5).

At the end of the programming period 4 of the weekend, the programming is completed and the

thermostat returns to normal operation.

It is possible to exit the Automatic mode’s programming at any time:

• By pressing down the button.

• By not pressing down any buttons during 1 minute.

In any case, all programming is saved.

Erasing of the programming

When programming the Automatic mode, it is possible to delete a programming period.

1. Enter into the programming of the Automatic mode and reach the period, as described in the previous

section.

Autres manuels pour STE302P

Table des matières

Autres manuels Stelpro Thermostat

Stelpro

Stelpro STE402P Manuel utilisateur

Stelpro

Stelpro Maestro SMC402 Manuel utilisateur

Stelpro

Stelpro STE302NP Manuel utilisateur

Stelpro

Stelpro STE402P Manuel utilisateur

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur

Stelpro

Stelpro STZW402+ Manuel utilisateur

Stelpro

Stelpro MAESTRO Manuel utilisateur

Stelpro

Stelpro MAESTRO Manuel utilisateur

Stelpro

Stelpro B1T1ER Manuel d'utilisation et d'entretien

Stelpro

Stelpro MAESTRO Manuel utilisateur

Stelpro

Stelpro 360 comfort D070 Manuel utilisateur

Stelpro

Stelpro Maestro SMT402 Manuel utilisateur

Stelpro

Stelpro STCNP - 5mA Manuel utilisateur

Stelpro

Stelpro STE362RNP Manuel utilisateur

Stelpro

Stelpro STE241 Manuel utilisateur

Stelpro

Stelpro Maestro ASMT402 Manuel utilisateur

Stelpro

Stelpro BA Series Manuel utilisateur

Stelpro

Stelpro STE302P Manuel utilisateur

Stelpro

Stelpro STE402NP Manuel utilisateur

Stelpro

Stelpro STE302R2+ Manuel utilisateur

Stelpro

Stelpro Allia SAT402ZB Manuel utilisateur

Stelpro

Stelpro Maestro SMC402AD Manuel utilisateur

Stelpro

Stelpro True Comfort PS120/240WF Manuel utilisateur

Stelpro

Stelpro MAESTRO Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Honeywell

Honeywell T6811 Manuel utilisateur