Stealth Products Pelvic Support Manuel utilisateur

USER MANUAL

Pelvic Support

The World’s Best Adductors

Stealth’s User Manual and Maintenance Guide for

The World’s Best Adductors

Customer Satisfaction 1.0

Stealth Products strives for 100% customer satisfaction. Your complete

satisfaction is important. Please contact us with feedback or suggested changes

that will help improve the quality and usability of our products.

You may reach us at:

General

Read and understand all instructions prior to the use of the product. Failure to

adhere to instructions and warnings in this document may result in property

damage, injury, or death. Product misuse due to failure of the following

instructions will void the warranty.

Immediately discontinue use if any function is compromised, parts are missing,

loose, or shows signs of excessive wear. Consult with your supplier for repair,

adjustment, or replacement.

MDSS GmbH

Schiffgraben 41

30175 Hannover, Germany

Stealth Products, LLC

104 John Kelly Drive, Burnet, TX 78611

Phone: (512) 715-9995 Toll Free: 1(800) 965-9229

Fax: (512) 715-9954 Toll Free: 1(800) 806-1225

[email protected] www.stealthproducts.com

Important Information 2.0

Important Information!

All persons responsible for fitting, adjustment, and daily use of the devices

discussed in these instructions must be familiar with and understand all safety

aspects of the devices mentioned. In order for our products to be used

successfully, you must:

Read and understand all instrucons and warnings.

Maintain our products according to our instrucons on care and maintenance.

Devices should be installed and adjusted by a trained technician.

Supplier Reference

Supplier:

Telephone:

Address:

Purchase Date:

Model:

iii

Introduction 3.0

Before you install or begin using this product, it is important that you read and

understand the content of these installation and operating instructions. The

installation instructions will guide you through the possibilities with

The World’s Best Adductors.

Instructions are written with the expressed intent of use with standard

configurations. They also contain important safety and maintenance

information. For further assistance, or more advanced applications, please

contact your supplier or Stealth Products at (512) 715-9995 or toll free at

1-800-965-9229.

Always keep the operating instructions in a safe place so they may be

referenced as necessary.

All information, pictures, illustrations, and specifications are based on the

product information that was available at the time of printing. Pictures and

illustrations shown in these instructions are representative examples and

are not intended to be exact depictions of the various parts of the product.

Ordering Documentation

You can download additional copies of this User Manual on the Stealth website:

https://stlpro.site/stealth-docs

and search The Worlds Best Adductors User Manual in the search bar at the top

of the page.

Warranty 4.0

Our products are designed, manufactured, and produced to the highest of

standards. If any defect in material or workmanship is found, Stealth Products

will repair or replace the product at our discretion. Any implied warranty,

including the implied warranties of merchantability and fitness for a particular

purpose, shall not extend beyond the duration of this warranty. Stealth

Products, LLC does not warrant damage due to, but not limited to:

Misuse, abuse, or misapplicaon of products.

Modicaon or product without wrien approval from Stealth Products, LLC.

Any alteraon or lack of serial number, where applicable, will automacally

void this warranty.

Stealth Products, LLC is liable for replacement parts only.

Stealth Products, LLC is not liable for any incurred labor costs.

No person is authorized to alter, extend, or waive the warranties of Stealth

Products, LLC.

Stealth Products warrants against failure due to defective materials

or workmanship:

Covers: 2 years

Hardware: 5 years

Electronics: 3 years

In Case of Product Failure

In the event of product failure covered by our warranty, please follow the

procedures outlined below:

1. Call Stealth at +1 (512) 715-9995 or toll free +1-800-965-9229.

2. Request the Returns Department or obtain an RA from the Returns Department and

follow department or documentaon instrucons.

Table of Contents 5.0

1.0 Customer Satisfaction............................................................................. i

2.0 Important Information .......................................................................... ii

3.0 Introduction ........................................................................................... iii

4.0 Warranty ................................................................................................. iv

5.0 Table of Contents ................................................................................... v

6.0 Warning Labels ...................................................................................... vi

6.1 Warning Labels.................................................................................................... vi

6.2 Limited Liability ................................................................................................... vi

6.3 Testing..................................................................................................................... vi

7.0 Functioning.............................................................................................. 1

7.1 Operating Adductors ......................................................................................... 1

7.2 Adjusting Adductors........................................................................................... 1

8.0 Mounting ................................................................................................. 2

8.1 Standard Track Mounting ................................................................................ 2

8.2 Standard Cane Mounting................................................................................. 2

8.3 Standard Planar Mounting............................................................................... 3

8.4 All Season Mounting.......................................................................................... 3

8.5 Full Surface Contact Mounting ...................................................................... 4

9.0 First Time Use.......................................................................................... 5

9.1 Dealer Assistance................................................................................................. 5

9.2 User Testing ........................................................................................................... 5

9.3 Conditions of Use ................................................................................................ 5

10.0 Maintenance.......................................................................................... 6

10.1 Cleaning................................................................................................................ 6

10.2 Maintenance ....................................................................................................... 6

Warning Labels 6.0

Warning Labels 6.1

Warnings are included for the safety of the user, client, operator and property.

Please read and understand what the signal words SAFETY, NOTICE, CAUTION,

WARNING and DANGER mean, how they could affect the user, those around

the user, and property.

Limited Liability 6.2

Stealth Products, LLC accepts no liability for personal injury or damage to

property that may arise from the failure of the user or other persons to follow

the recommendations, warnings, and instructions in this manual.

Testing 6.3

Initial setup and driving should be done in an open area free of obstacles until

the user is fully capable of driving safely.

The World’s Best Adductors should be adjusted with the user in the chair in

order to promote the best position and maximum comfort for the client.

NOTICE

Identifies important information not related to injury, but

possible property damage.

SAFETY

Indicates steps or instructions for safe practices, reminders of

safe procedures, or important safety equipment that may be

necessary.

CA UTIO N Identifies a potential situation which (if not avoided) will

result in minor to moderate injury,and property damage.

WARNIN G Identifies a potential situation which (if not avoided) will

result in severe injury, death,and property damage.

DANGER Identifies an imminent situation which (if not avoided) will

result in severe injury, death,and property damage.

Functioning 7.0

Operating Adductors 7.1

To operate the adductors:

1. Depress the quick release buon (A).

2. The adductor will swing away 180° into an open-locked posion.

3. Depress quick release buon again to return swing away arm to the closed-locked posion.

Adjusting Adductors 7.2

Standard adductors offer three points of adjustment.

To adjust angles (B) and (C):

1. Lightly loosen 1/4-20 x 1” screws.

2. Set desired angles and reghten screws with 3/16 T-Handle. Do not overghten.

To adjust pad height:

1. Loosen 1/4-20 x 5/8” Buon Head Screws (D).

2. Slide the pad into the desired posion.

3. Reghten screws. Do not overghten.

NOTICE

To adjust links, use a 5/32 T-Handle.

(D)

(A)

(B), (C)

Torque Specifications:

1/4-20 screws = 6.3lb-ft

Mounting 8.0

Standard Track Mounting 8.1

To adjust standard track mounting:

1. Insert the 1/4 20x 3/4 Socket Head Screws (E) through the counter bore holes (F) and into

the threaded holes of the Universal Track Nut (G).

2. Tighten with a 3/16 T-Handle.

Standard Cane Mounting 8.2

To adjust standard cane mounting:

1. Insert the 1/4-20 x 3/4 Socket Head Screws (H) into the male tube clamp through the

counter bore holes and into the female side of the tube clamp.

2. Aach lateral by using 1/4-20 x 3/4 Socket Head Screws and mounng directly to the cane

clamp.

3. Tighten with a 3/16 T-Handle.

(D)

(E)

(G)

(F)

Mounting 8.0

Standard Planar Mounting 8.3

To install planar mounts:

1. Use 1/4-20 x 5/8 Socket Head Screws (A) to mount on the base of the planar mount to the

interior of the adductor.

2. Screw the 1/4-20 x 5/8 Buon Head Screws (B) through the slots on the planar mount onto

the mounng hardware on the chair.

3. Tighten with 3/16 T-Handle.

All Season Mounting 8.4

To install the All Season Mounts:

1. Aach the All Season Bracket to the chair by using the 1/4-20 x 1/2” Flat Head Screws (A).

Tighten with 5/32 T– Handle.

2. Use the 1/4-20 x 3/4 Socket Head Screws (B) to directly mount the All Season Bracket.

Tighten with a 3/16 T-Handle.

3. Press down on the red buon (C) to make lateral adjustments.

(A) (B)

((A)

(C)

(B)

Torque Settings:

1/4-20 screws = 6.3lb.-ft

Torque Settings:

1/4-20 screws = 6.3lb.-ft

Table des matières

Autres manuels Stealth Products Fauteuil roulant

Stealth Products

Stealth Products Stealth Positioning Pelvic Belts Manuel utilisateur

Stealth Products

Stealth Products ADI Manuel utilisateur

Stealth Products

Stealth Products UniLink Headrest Manuel utilisateur

Stealth Products

Stealth Products UniLink Ultra Manuel utilisateur

Stealth Products

Stealth Products ADI HA-42 Manuel utilisateur

Stealth Products

Stealth Products The World's Best Laterals Manuel utilisateur

Stealth Products

Stealth Products Simple Solutions Tray Manuel utilisateur

Stealth Products

Stealth Products i-Fit IFCS Manuel utilisateur

Stealth Products

Stealth Products mo-Vis Series Manuel utilisateur

Stealth Products

Stealth Products ADI HA-26 Mode d’emploi

Stealth Products

Stealth Products UniLink Elbow Block Manuel utilisateur

Stealth Products

Stealth Products Carbon Fiber Seat Base Manuel utilisateur

Stealth Products

Stealth Products ADI Aluminum Series Manuel utilisateur

Stealth Products

Stealth Products I-Drive IDCH Series Instructions d'utilisation

Stealth Products

Stealth Products i-Drive Mode d’emploi

Stealth Products

Stealth Products ADI HA-18 Manuel utilisateur

Stealth Products

Stealth Products ADI Fusion16 DB Series Manuel utilisateur

Stealth Products

Stealth Products MTMD-12 Mode d’emploi

Stealth Products

Stealth Products AL Series Manuel utilisateur

Stealth Products

Stealth Products True Forming Back Manuel utilisateur

Stealth Products

Stealth Products Drop Lock Hardware Mode d’emploi

Stealth Products

Stealth Products ADI AL Series Manuel utilisateur

Stealth Products

Stealth Products ADI ELITE Manuel utilisateur

Stealth Products

Stealth Products ADI Q-Back 2.0 AL Series Manuel utilisateur

Manuels Fauteuil roulant populaires d'autres marques

Otto Bock

Otto Bock Skippi plus Manuel utilisateur

Invacare

Invacare Action 4NG series Manuel utilisateur

SORG

SORG LoopSORG 802 Manuel utilisateur

Designability

Designability WizzyBug Instructions d'installation

Vermeiren

Vermeiren RAPIDO Manuel utilisateur

Excel

Excel G5 KIDS 0285 Manuel utilisateur

M. Bartels

M. Bartels SA-3 Manuel utilisateur

nino robotics

nino robotics NIno Manuel utilisateur

Vermeiren

Vermeiren Turios Manuel utilisateur

Invacare

Invacare MK5 EX Manuel utilisateur

Invacare

Invacare Solara Spree GT Manuel

Nova

Nova TKW-12 Manuel utilisateur

BCW

BCW Advantage Manuel utilisateur

You-Q

You-Q Luca Manuel utilisateur

interco

interco Ortolight Standard Mode d’emploi

Nova

Nova 7190L Manuel utilisateur

Vermeiren

Vermeiren EZ1 Manuel utilisateur

PaceSaver

PaceSaver Scout M-300 Manuel utilisateur