Stealth Products Mo-Vis Manuel utilisateur

Multi Switch

Owner's Manual for the mo-Vis Multi Switch

Customer Satisfaction 1.0

Stealth Products strives for 100% customer satisfaction. Your complete satisfaction is important.

Please contact us with feedback or to suggest changes that may help us improve the quality and

usability of our products.

You may reach us at:

Stealth Products

104 John Kelly Drive, Burnet, TX 78611

Phone: (512) 715-9995 Toll Free (800) 965-9229

Fax: (512) 715-9954 Toll Free (800) 806-1225

[email protected]

MDSS GmbH

Schigraben 41

30175 Hannover, Germany

General

Read and understand all instructions prior to the use of this product. Failure to adhere to instructions

and warnings in this document may result in property damage, injury, or death. Product misuse due

to failure to adhere to the following instructions will void the warranty.

Immediately discontinue use if any function is compromised, if parts are missing or loose, or if any

component shows signs of excessive wear. Consult your supplier for repairs, adjustments, or

replacements.

Important Information 2.0

Important Information

All persons responsible for tting, adjustment, and daily use of the devices discussed in these

instructions must be familiar with and understand all safety aspects of the devices mentioned. In order

for our products to be used successfully, you must:

• read and understand all instructions and warnings;

• maintain our products according to our instructions on care and maintenance; and,

• ensure devices are installed and adjusted by a trained technician.

Supplier Reference

Supplier:

Telephone:

Address:

Purchase Date:

Model:

Introduction 3.0

iii

The installation instructions will guide you through the options and possibilities with the product.

Instructions are written with the expressed intent of use with standard congurations. They also

contain important safety and maintenance information, as well as describe possible problems that can

arise during use. For further assistance or more advanced applications, contact your supplier or

Stealth Products at (512) 715-9995 or toll free at (800) 965-9229.

Always keep the operating instructions in a safe place so they may be referenced as necessary.

All information, pictures, illustrations, and specications are based on the product information that

was available at the time of printing. Pictures and illustrations shown in these instructions are

representative examples and are not intended to be exact depictions of the various parts of the

product.

Ordering Documentation

You can download additional copies of this user manual by accessing the Stealth Products website

(https://stlpro.site/stealth-docs) and searching "mo-Vis Multi Switch Owners Manual" in the search bar

at the top of the page.

Warranty 4.0

Our products are designed, manufactured, and produced to the highest of standards. If any defect in

material or workmanship is found, Stealth Products, LLC will repair or replace the product at our

discretion. Any implied warranty, including the implied warranties of merchantability and tness for a

particular purpose, shall not extend beyond the duration of this warranty. Stealth Products, LLC does

not warrant damage due to, but not limited to:

• misuse, abuse, or misapplication of products; and/or

• modication of product without written approval from Stealth Products, LLC.

Any lack or alteration of serial number, where applicable, will automatically void this warranty.

Stealth Products, LLC is liable for replacement parts only. Stealth Products, LLC is not liable for any

incurred labor costs.

No person is authorized to alter, extend, or waive the warranties of Stealth Products, LLC.

Covers/Soft Goods: 2 years

Hardware: 5 years

Electronics: 3 years

In Case of Product Failure

In the event of product failure covered by our warranty, please follow the procedure outlined below:

1. Call Stealth Products at (512) 715-9995 or toll free at (800) 965-9229.

2. Request a Return Authorization form (RA) from the Returns Department and follow documentation

instructions.

Table of Contents 5.0

1.0 Customer Satisfaction ................................................................................................................i

2.0 Important Information ............................................................................................................ ii

3.0 Introduction .................................................................................................................................iii

4.0 Warranty.........................................................................................................................................iv

5.0 Table of Contents........................................................................................................................ v

6.0 Warning Labels ...........................................................................................................................vi

6.1 Warning Labels ...................................................................................................................vi

6.2 Limited Liability...................................................................................................................vi

6.3 Testing....................................................................................................................................vi

7.0 Design and Function ................................................................................................................. 1

7.1 Intended Use ....................................................................................................................... 1

7.2 Features ................................................................................................................................. 1

8.0 Parts and Accessories ...........................................................................................................2-3

8.1 Multi Switch Package........................................................................................................ 2

8.2 Mounting the Multi Switch ............................................................................................ 3

9.0 Technical Data .......................................................................................................................4-13

9.1 USB Power Supply ............................................................................................................. 4

9.2 Input........................................................................................................................................ 4

9.3 Output.................................................................................................................................... 4

9.4 mo-Vis Congurator Software...................................................................................... 5

9.5 Output Operation Mode Selection............................................................................. 5

9.6 Troubleshooting ...............................................................................................................10

9.7 Technical Dimensions and Specications...............................................................13

10.0 Installation Instructions......................................................................................................14

10.1 Preparations ....................................................................................................................14

10.2 Tools ...................................................................................................................................14

10.3 Installation Plan..............................................................................................................14

10.4 Installing the Multi Switch .........................................................................................14

11.0 First Time Use ..........................................................................................................................15

12.0 Maintenance.............................................................................................................................16

12.1 Maintenance....................................................................................................................16

12.2 Cleaning ............................................................................................................................16

Warning Labels 6.0

Warning Labels 6.1

Warnings are included for the safety of the user, client, operator, and property. Please read and

understand what the signal words DANGER, WARNING, CAUTION, NOTICE, and SAFETY mean, and

how they could aect the user, those around the user, and property.

Limited Liability 6.2

Stealth Products, LLC accepts no liability for personal injury or damage to property that may arise

from the failure of the user or other persons to follow the recommendations, warnings, and

instructions in this manual.

Stealth Products LLC does not hold responsibility for nal integration of nal assembly of product to

end user.

Stealth Products, LLC is not liable for user death or injury.

Testing 6.3

Initial setup and driving should be done in an open area free of obstacles until the user is fully capable

of driving safely.

CAUTION Identies a potential situation which, if not avoided, may result in minor to

moderate injury and property damage.

WARNING Identies a potential situation which, if not avoided, may result in severe

injury,death, and property damage.

DANGER Identies an imminent situation which, if not avoided, may result in severe

injury,death, and property damage.

NOTICE Identies important information not related to injury, but possible property

damage.

SAFETY Indicates steps or instructions for safe practices, reminders of safe procedures,

or important safety equipment that may be necessary.

Design and Function 7.0

Intended Use 7.1

The Multi Switch is intended to control up to four devices/technical aids with one input device (mechanical

or proximity switch). The mechanical switch is only intended to support auxiliary wheelchair function. The

Multi Switch oers the user greater freedom of operation and increased function control. The switch is USB

powered and contains its own control electronics.

The Multi Switch is also available as part of a package which includes proximity sensors. The sensors can be

used as input devices and require no force to activate. The addition of mo-Vis proximity sensors increases the

level of autonomy aorded the chair user.

Multi Switch Features 7.2

mo-Vis' Multi Switch features:

• one 3.5mm stereo input jack, allowing a mechanical switch or proximity sensor input connection;

• two 3.5mm stereo output jacks, allowing up to four separate outputs (with splitter cables, sold

separately);

• a LED for each output channel, indicating status and activity of the channel;

• clear, audible feedback;

• fully adjustable input and output parameters via conguration software; and,

• multiple mode settings.

Proximity Sensor Features 7.3

mo-Vis proximity sensors, sold separately from and compatible only with the Multi Switch, feature:

• two size options:

• 12mm for installations with limited space; and,

• 24mm for installations requiring increased sensitivity.

• sensitivity adjustment via congurator software; and,

• easy calibration and conguration.

CAUTION

Moisture (e.g., rain) is a conductive substance. While a negligible

amount of liquid may not interfere with device operation, a coating

of moisture can cause the sensors to constantly read as activated.

Parts and Accessories 8.0

Multi Switch Package 8.1

Included in the Multi Switch package:

For proximity sensor input, only mo-Vis proximity sensors (sold separately) are compatible with the

Multi Switch. These are:

Optional: Splitter Cable

The 3.5mm stereo to 3.5mm

mono splitter (sold separately) is

required to convert a single

output to a dual output.

Product Description

Multi Switch Proximity Sensor (12mm)

Multi Switch Proximity Sensor (24mm)

Product Description

Multi Switch Unit

USB to Micro USB

Connector Cable

Parts and Accessories 8.0

Mounting the Multi Switch 8.2

Its exceedingly small size grants the Multi Switch nearly unlimited mounting options.

The use of hook-and-loop adhesive patches is recommended when mounting the switch.

(Note: Hook-and-loop adhesive patches are not included with the Multi-Switch.)

CAUTION Keep devices that emit radio frequencies (e.g., mobile phones)

at least 30cm (12") from the sensor and its connecting cable.

NOTICE Only install this product on wheelchairs onto which

the manufacturer allows the installation of third-party parts.

CAUTION

In case high sensitivities are utilized for sensors (70%),

ensure the sensor is rmly xed and its cables routed in a way

that avoids kinks or obstructions. Moving the sensor or its cables

can inuence its sensitivity, possibly producing false activations.

NOTICE

Ensure the user has unobstructed visual contact with the LEDs

on the front of the Multi Switch, in order to check its status.

Although every activation is able to trigger an auditory signal, it is not

recommended to rely on this alone for activation conrmation.

CAUTION

The Multi Switch is not waterproof. While a few drops of water

will not likely cause problems, the device should be mounted

in such a way as to ensure that water cannot enter the device.

NOTICE

The electronics of the Multi Switch can be aected by external electromagnetic

elds (e.g., elds generated by mobile telephones). The electronics themselves can

also emit electromagnetic elds that can aect electronics in their immediate

surroundings (e.g., certain electronic alarm systems). The limit values for

Electromagnetic Compatibility (EMC) with respect to this type of device are set in

the harmonized standards for the EU in the Medical Device Directive, No. 93/42/

EEC. The Multi Switch unit and its proximity sensors comply with these values.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Stealth Products Changer

Stealth Products

Stealth Products i-Connect 5 Manuel utilisateur

Stealth Products

Stealth Products i-Drive VR Manuel utilisateur

Stealth Products

Stealth Products IC12F-1 Manuel utilisateur

Stealth Products

Stealth Products mo-Vis Twister Switch Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Stealth Products mo-Vis Manuel utilisateur

Manuels Changer populaires d'autres marques