StarTech.com NETRS232485 Manuel utilisateur
Manual Revision: 05/07/2015
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
NETRS232485
Industrial 1 Port RS232/422/485 to Dual
Ethernet Serial Device Server
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s authority
to operate the equipment.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Product Diagram ....................................................................................1
Front View .................................................................................................................................................... 1
Side 1 ............................................................................................................................................................. 1
Side 2 ............................................................................................................................................................. 1
Introduction............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements.............................................................................................................................. 2
DB-9 Connector Pinout .........................................................................3
DIP Switch Conguration......................................................................3
Installation ..............................................................................................4
Hardware Installation .............................................................................................................................. 4
Software Installation................................................................................................................................ 4
Operation ................................................................................................5
Using the DS-Tool...................................................................................................................................... 5
Using the Logging Feature .................................................................................................................... 6
Specications..........................................................................................8
Technical Support ..................................................................................9
Warranty Information............................................................................9
Instruction Manual
1
Product Diagram
Front View
1. LED for PWR1
2. LED for PWR2
3. LED for Ethernet Port 1
4. LED for Ethernet Port 2
5. LED for Serial Port
Side 1
1. Terminal Block PWR1 (12~48V DC)
2. Power Jack PWR2 (12~48V DC)
3. 2x Ports RJ45 10/100
Side 2
1. Reset Button
2. DB-9 Serial Port
3. DIP Switch
Instruction Manual
2
Introduction
Packaging Contents
• 1x Serial over IP Device Server
• 1x DIN-Rail Kit
• 1x Wall-Mount Kit
• 1x Software CD
• 1x Installation Guide
System Requirements
• Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows® Server
2012, 2008 R2, 2003(32/64).
Instruction Manual
3
DB-9 Connector Pinout
DIP Switch Conguration
DIP 1 DIP 2 Termination Conguration
ON ON Termination for long distance 4-wire RS485/422
ON OFF Reserved
OFF ON Termination for long distance 2-wire RS485
OFF OFF No termination for RS485/ 422 (short distance)
Instruction Manual
4
Installation
Hardware Installation
The server can be installed on a DIN rail or it can be wall-mounted.
Installation on a DIN-Rail:
1. Tilt the unit, making sure that the metal spring located at the back is positioned on
top of the DIN rail.
2. Push the unit towards the rail until a “click” sound is heard.
Installation on a Wall:
1. Remove the DIN-rail kit, if it is installed on the unit.
2. Install the wall-mount panel included using the 3 screws found in the package.
3. Mount the unit on the wall using the appropriate hardware for the surface you are
mounting to.
Software Installation
1. Insert the provided CD into your DVD/CD-ROM drive.
2. Browse to the folder fscommand\Utility\DS-Tool and execute the installer
Startech_V1.0_xxxxxxx.
3. Follow the on-screen instructions to complete the installation.
Instruction Manual
5
Operation
Using the DS-Tool
1. Start the DS-Tool, and click Install this driver software anyway.
2. Allow access to the DS-Tool on the Windows Firewall.
3. Once the utility opens, click the Broadcast button to detect the device server. The
default IP address of the device is 192.168.10.2.
4. Once detected, click the checkbox beside the device you would like to congure,
and then click the Add button to congure your desired IP settings (Static/DHCP).
Instruction Manual
6
To add a virtual COM port, please use the VCOM Wizard and follow the steps.
Using the Logging Feature
To use the device server’s Logging Feature within the DS-Tool, follow the steps below:
1. In the navigation menu on the left side of the window, under Device List, click the
IP address for the applicable connected device.
2. To use the current machine for logging, under System Log Settings, click Using
Current Host’s Log Server.
3. In the navigation menu on the left side of the window, click System Log.
Instruction Manual
7
4. The log data is displayed in the DS-Tool, under Log Message.
Table des matières
Autres manuels StarTech.com Serveur
StarTech.com
StarTech.com RK1836BKF Manuel utilisateur
StarTech.com
StarTech.com NETRS232_1 Manuel utilisateur
StarTech.com
StarTech.com NETRS232485W Manuel utilisateur
StarTech.com
StarTech.com SV1115IPEXT Manuel utilisateur
StarTech.com
StarTech.com NETRS232 Manuel utilisateur
StarTech.com
StarTech.com SV1108IPEXT Manuel utilisateur
StarTech.com
StarTech.com NETRS232 Manuel utilisateur
StarTech.com
StarTech.com USB1000IP Manuel utilisateur
StarTech.com
StarTech.com SV1105IPPCI Manuel
StarTech.com
StarTech.com RK919WALLO Manuel utilisateur
StarTech.com
StarTech.com NETRS2321P Manuel utilisateur
StarTech.com
StarTech.com NETRS42348PD Manuel utilisateur
StarTech.com
StarTech.com 8STUSB1000IP Manuel utilisateur
StarTech.com
StarTech.com RK2236BKF Manuel utilisateur
StarTech.com
StarTech.com USB4000IP Manuel utilisateur
StarTech.com
StarTech.com NETRS232 Manuel utilisateur
StarTech.com
StarTech.com RK619WALL Manuel utilisateur
StarTech.com
StarTech.com USB4000IP Manuel utilisateur
StarTech.com
StarTech.com WALLSHELF4U Manuel utilisateur
StarTech.com
StarTech.com RK1536BKF Manuel utilisateur
