StarTech.com NETRS2321P Manuel utilisateur
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du
Canada.
CAN ICES-3 (A)/NMB-3(A)
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Wiring terminations should not be made with the product and/or electric
lines under power.
• Cables (including power and charging cables) should be placed and routed
to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit
et/ou les câbles électriques sont sous tension.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent
être placés et acheminés de façon à éviter tout risque électrique, de chute ou
de sécurité
安全対策
• 電源が入っている状態の製品または電線の終端処理を行わないでくださ
い。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し
を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
にしてください。
Misure di sicurezza
• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le
linee elettriche sotto tensione.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati
e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o
pericoli per la sicurezza.
Säkerhetsåtgärder
• Montering av kabelavslutningar får inte göras när produkten och/eller
elledningarna är strömförda.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så
sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Safety Statements..................................................................................2
Product Diagram ....................................................................................5
Top View ....................................................................................................................................................... 5
Rear View...................................................................................................................................................... 6
RJ45 Pin Assignment................................................................................................................................ 7
RS-232 DB9 Pin Assignment.................................................................................................................. 8
Product Information ..............................................................................9
Package Contents ..................................................................................................................................... 9
Installation ..............................................................................................9
DIN Rail Mounting..................................................................................10
Load Default Settings/System Reset Button......................................10
Load Default Settings.............................................................................................................................. 10
System Reset............................................................................................................................................... 10
Broadcast Search....................................................................................................................................... 10
Using the Web Console .........................................................................11
Accessing the Web Console...................................................................................................................11
Changing/Setting a Login ID and Password....................................................................................11
Conguring System Network Settings.............................................................................................. 12
System Status ............................................................................................................................................. 14
Load Default Setting................................................................................................................................ 14
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Firmware Update....................................................................................15
Conguring TCP Mode ..........................................................................16
Conguring UDP Mode .........................................................................18
UART.........................................................................................................20
Resetting the Device..............................................................................23
Virtual COM Software Operation.........................................................23
Installing the Virtual COM Software ................................................................................................... 23
Conguration the Virtual COM Software.......................................................................................... 25
Setting Up COM Mapping...................................................................................................................... 27
TCP/UDP Settings...................................................................................29
LED Indicators.........................................................................................31
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Top View
1LEDs
2RS-232 DB9 Serial Port
3Wall Mount Screw Hole
4DIN Rail Screw Hole
2
4
3
1
6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rear View
1RJ45 Port
2Load Default/Reset Button
3DC Jack
1 32
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
RJ45 Pin Assignment
Pin Description
1 TX+
2TX-
3 RX+
6RX-
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
RS-232 DB9 Pin Assignment
NOTE: This serial device server performs as a DTE device.
Pin Name IO
1 DCD Input
2 RD Input
3 TD Output
4DTR Output
5 GND
6 DSR Input
7RTS Output
8 CTS Input
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
• Serial over IP Device Server x 1
• Universal Power Adapter (NA/UK/EU/AU) x 1
• User Manual x 1
• DIN Rail Kit x 1
Installation
1. Plug in the power adapter and connect the RJ45 interface to
your LAN.
NOTE: Alternatively, you can also use a crossover cable to
connect the NETRS2321P directly to your system for the initial
conguration.
2. Press and hold the load default button for more than 3
seconds and less than 10 seconds, then release it. This will
return the serial device server to factory default and it will
respond to the IP address 10.1.1.1.
3. Congure the PC to the same IP domain.
4. Open a web browser and connect to http://10.1.1.1 to
open the conguration interface. The default login ID will be
“admin” and the password will be “admin”.
5. Once logged in, you will have access to all conguration
settings including the ability to change the IP address for the
device server.
Autres manuels pour NETRS2321P
1
Table des matières
Autres manuels StarTech.com Serveur
StarTech.com
StarTech.com 8STUSB1000IP Manuel utilisateur
StarTech.com
StarTech.com NETRS232 Manuel utilisateur
StarTech.com
StarTech.com USB1000IP Manuel utilisateur
StarTech.com
StarTech.com NETRS232 Manuel utilisateur
StarTech.com
StarTech.com SV1108IPEXT Manuel utilisateur
StarTech.com
StarTech.com NETRS232485W Manuel utilisateur
StarTech.com
StarTech.com SV1115IPEXT Manuel utilisateur
StarTech.com
StarTech.com PM1115UW Manuel utilisateur
StarTech.com
StarTech.com USB4000IP Manuel du système
StarTech.com
StarTech.com USB4000IP Manuel utilisateur
StarTech.com
StarTech.com SV1105IPPCI Manuel
StarTech.com
StarTech.com WALLSHELF4U Manuel utilisateur
StarTech.com
StarTech.com NETRS2322P Manuel utilisateur
StarTech.com
StarTech.com NETRS232 Manuel utilisateur
StarTech.com
StarTech.com NETRS2321POE Manuel utilisateur
StarTech.com
StarTech.com NETRS232_1 Manuel utilisateur
StarTech.com
StarTech.com RK1836BKF Manuel utilisateur
StarTech.com
StarTech.com USB4000IP Manuel utilisateur
StarTech.com
StarTech.com RK1536BKF Manuel utilisateur
StarTech.com
StarTech.com RK919WALLO Manuel utilisateur
