StarTech.com WALLMOUNTH4 Manuel utilisateur

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: January 19, 2022 5:41 PM

Product Diagram (WALLMOUNTH4)

Component Function

1Mounting Holes (4) • Mount the Wall-Mount Bracket to a Wall.

• Maximum weight capacity = 15 kg (33 lb).

2Cage Nut Holes

• Mount a Patch Panel in the Wall-Mount

Bracket.

• Maximum height = 4U.

3Hinged Side Panel • Access the back of the installed Patch Panel.

Package Contents

• Wall-Mount Bracket x 1

• M6 Screws x 4

• M6 Cage Nuts x 4

• Plastic Washers x 4

• M5-25 Flat-head Screws x 4

• Concrete Wall Anchors x 4

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/WALLMOUNTH4

• Phillips Head Screwdriver x 1

• (Optional) Cage Nut Tool x 1

4U 19in Steel Hinged Wall-Mount Bracket for Patch Panels

Installing the Wall-Mount Bracket

Warnings: If you lack the necessary expertise to attach this product to the wall,

consult a professional to install the Wall-Mount Bracket or to provide specic

mounting instructions for your wall structure.

Make sure that the type of wall structure and mounting hardware that you are using

will properly support the mounted equipment. Failure to do so might result in personal

injury and/or equipment damage. The wall structure should be capable of supporting

at least four times the weight of the mounted equipment.

Do not add equipment to the Wall-Mount Bracket until it is securely attached to the

wall.

Adding Equipment to the Wall-Mount Bracket

Use the included M6 Cage Nuts, Screws, and Plastic Washers to install equipment

into the Wall-Mount Bracket.

1. Insert the Wing (side) of an M6 Cage Nut into the back of the desired Cage Nut

Hole.

2. Apply pressure by hand, or with the Cage Nut Tool, to insert the second Wing of the

M6 Cage Nut into the desired Cage Nut Hole.

3. Repeat steps 1 and 2 to insert the desired number of Cage Nuts for the application.

4. Thread a Plastic Washer over an M6 Screw. Repeat until the desired number of M6

Screws have been prepared.

5. Align the Mounting Holes in the Equipment with the M6 Cage Nuts installed in

steps 1-3.

6. Insert the assembled Screws through the Mounting Holes in the Equipment and

into the M6 Cage Nuts.

7. Tighten the Screws, using a Phillips Head Screwdriver.

Accessing the Back of a Patch Panel

1. While supporting the weight of the Patch Panel, use a Phillips Head Screwdriver

to unscrew two M6 Screws from the Cage Nuts, leaving the other two M6 Screws

attached to the Hinged Side Panel.

Note: Make sure that there is enough clearance for the Patch Panel to free swing

away from the Wall-Mount Bracket, before accessing the back of the Patch Panel.

2 3

2. Gently swing the Patch Panel away from the Wall-Mount Bracket to gain access to

the back of the Patch Panel.

3. Reattach the two M6 Screws removed in step 1.

Product Dimensions

Warnings

• Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage.

This product can support the following weight: 15 kg (33 lb.).

• Make sure that the surface that you are attaching this product to can safely support the combined weight of the

equipment and all of the hardware and components.

• Wall structures vary, and it is important to make sure that the type of wall structure and mounting hardware that you are

using will properly support the mounted equipment. Failure to do so might result in personal injury and/or equipment

damage. The wall structure should be capable of supporting at least four times the weight of the mounted equipment

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Autres manuels StarTech.com Support et étagère

StarTech.com

StarTech.com ARMBARQUAD Manuel utilisateur

StarTech.com

StarTech.com RK12OD2 Manuel utilisateur

StarTech.com

StarTech.com SECTBLTDT Manuel utilisateur

StarTech.com

StarTech.com MONSTND Guide de démarrage rapide

StarTech.com

StarTech.com UNIRAILS1UB Manuel utilisateur

StarTech.com

StarTech.com RK4OD Manuel utilisateur

StarTech.com

StarTech.com ARMDUALV Manuel utilisateur

StarTech.com

StarTech.com ARMDUAL2 Manuel utilisateur

StarTech.com

StarTech.com APLVESAMNTP Manuel utilisateur

StarTech.com

StarTech.com ARMQUADSS Manuel utilisateur

StarTech.com

StarTech.com 4POSTRACK18U Manuel utilisateur

StarTech.com

StarTech.com DSIGNAGESTND Manuel utilisateur

StarTech.com

StarTech.com SHELF-1U-12-FIXED-S Manuel utilisateur

StarTech.com

StarTech.com RK12WALLO Manuel utilisateur

StarTech.com

StarTech.com 12U Manuel utilisateur

StarTech.com

StarTech.com 4POSTRACK12 Manuel utilisateur

StarTech.com

StarTech.com FLATPNLCEIL Manuel utilisateur

StarTech.com

StarTech.com PROJWALLMNT Manuel utilisateur

StarTech.com

StarTech.com FPWARTB1M Manuel utilisateur

StarTech.com

StarTech.com WALLSHELF8U Manuel utilisateur

StarTech.com

StarTech.com ARMPIVOTB2 Manuel utilisateur

StarTech.com

StarTech.com RK219WALVO Manuel utilisateur

StarTech.com

StarTech.com WALLSHELF4U Manuel utilisateur

StarTech.com

StarTech.com ARMSLIMDUOS Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur