StarTech.com ATX2PW630PRO Manuel utilisateur

Manual Revision: 02/03/2012

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

ATX2PW630PRO

Pro 630W ATX12V 2.3 80 Plus Computer

Modular Power Supply

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use ofTrademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Installation ..............................................................................................2

Hardware Installation .............................................................................................................................. 2

Specications..........................................................................................5

Connectors .................................................................................................................................................. 6

Technical Support ..................................................................................7

Warranty Information............................................................................7

Instruction Manual

Introduction

The StarTech.com Modular ATX12V 2.3/ EPS12V 2.91 series power supplies use a modular

cable design, enabling you to selectively choose the connectors you require while also

being 80 Plus®certied, thus providing stable power while balancing energy-eciency.

Compliant with ATX12V 2.3 standards, this power supply oers the versatility and

support for AMD or Intel CPU based entry level servers, gaming PCs and high end work

stations, or a higher level energy-ecient replacement/upgrade power supply for

Desktop PC’s. Featuring a 120mm fan for quieter, more ecient cooling in demanding

systems, Active Power Factor Correction and 20/24 pin motherboard support.

Packaging Contents

• 1 x ATX Power Supply

• 1 x 8-pin (6+2) PCI Express Modular cable

• 1 x 6-pin PCI Express connector Modular cable

• 1 x 3xSATA connector Modular cable

• 1 x 3xLP4 Molex + 1xSP4 oppy connector Modular cable

• 3 x Power Cord (NA/UK/EU)

• 1 x Instruction Manual

System Requirements

• ATX compliant motherboard

• ATX compliant computer case that supports full sized power supplies

Instruction Manual

Installation

WARNING! Computer parts can be severely damaged by static electricity. Be sure

that you are properly grounded before opening your computer case. StarTech.

com recommends that you wear an anti-static strap when installing any computer

component. If an anti-static strap is unavailable, discharge yourself of any static

electricity build-up by touching a large grounded metal surface (such as the computer

case) for several seconds.

Installation of a power supply requires some mechanical skill and requires that you

open your computer case to disconnect and reconnect wires. If you are unfamiliar

with this kind of work, consider bringing your computer and new StarTech.com power

supply to your local computer store for help.

Hardware Installation

1. Turn your computer o and any peripherals connected to the computer (i.e.

printers, external hard drives, etc.).

2. If the power supply has a power switch on it, set it to the “0” position. Unplug the

power cable from the rear of the power supply on the back of the computer and

disconnect all other peripheral cables.

3. Remove the cover from the computer case. Refer to documentation for your

computer system for details.

4. Disconnect all of the power connectors from the motherboard and peripheral

devices (i.e. hard drives, CD/DVD drives, etc). Make sure to take note of each

connector and where they were plugged in. Ensure there are no devices connected

to the existing power supply.

5. Remove the existing power supply from the computer case. This is typically done by

removing four (4) mounting screws on the outside face of the power supply. Refer

to documentation for your computer system/case for specics.

6. Connect the necessary modular cables to the power supply, in their appropriate

socket. The connectors are color coded and keyed to prevent incorrect installation.

It is only necessary to install the cables that are required for the computer system.

NOTE: The “green” Modular connector is used for PCI Express connectors while “blue” is

used for other peripheral connectors (SATA, LP4 molex, etc).

Instruction Manual

Peripheral Modular

connector

PCI Express Modular

connector

7. Mount and install the new power supply by reversing the steps used to remove the

old power supply.

8. Connect the power connectors from the power supply to the motherboard and

peripheral devices that were disconnected previously. Note that this power supply

uses a 20+4 pin split ATX connector, so it can be used on motherboards with either

a 20-pin or 24-pin connector. Simply detach the extra 4-pin attachment for use on

20-pin motherboards.

NOTE:

The detached4-pinconnectorcannot be usedinplace of the4-pinATX12V(P4)connector.

9. Make sure any loose or unused cables/connectors from the power supply are away

from fans and other moving parts.

10. Place the cover back onto the computer case.

11.

Make sure the power switch on the power supply is set to“0”, then insert the power cable

Instruction Manual

into the socket on the power supply. If the old power cable looks worn or damaged in any

way, replace with the supplied power cable, otherwise it is safe to reuse it.

12. Reconnect all other connectors/cables that were removed in Step 2.

13. Set the power switch on the power supply to “1”. The computer is now ready to be

powered up.

Instruction Manual

Specications

Standards ATX12V v2.3

EPS12V v2.92

Maximum Power Output 630W

Eciency Rating

85.39% @ 20% (130W)

85.29% @ 50% (323W)

80.02% @ 100% (636W)

Fans 1 x 120mm (Dual Ball Bearing)

Input Power 100 ~ 240VAC, 10 ~ 5A, 47 ~ 63Hz

Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)

@ 90% Load

Storage Temperature -20°C ~ 80°C (-4°F ~ 176°F)

Humidity 10 ~ 90% RH

MTBF 100, 000 hours

Dimensions (LxWxH) 141.0mm x 150.0mm x 86.0mm

Weight 2100g

ATX2PW630PRO Power Output

Output

+3.3V +5V +12V1 +12V2 +12V3 +12V4 -12V +5Vsb

24A 24A 20A 20A 20A 20A 0.5A 2.5A

Max

Power

140W 600W 6W 12.5W

611.5W

Instruction Manual

Connectors

1 x ATX 20+4 pin 1 x 4+4 pin ATX12V

(8-pin EPS12V)

1 x 6-pin PCI Express 2 x 8-pin PCI Express

(6+2)

3 x 4-pin Molex Power (LP4) 1 x 4-pin Mini-Power (SP4)

6 x 15-pin SATA

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a three year warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Table des matières

Autres manuels StarTech.com Alimentation

StarTech.com

StarTech.com ATX2POW400HS Manuel utilisateur

StarTech.com

StarTech.com ATXPW300DELL Manuel utilisateur

StarTech.com

StarTech.com CFXPOWER350 Manuel utilisateur

StarTech.com

StarTech.com ATXPOWER400 Manuel

StarTech.com

StarTech.com ATXPOW480HS Manuel

StarTech.com

StarTech.com ATX2POW450HS Manuel utilisateur

StarTech.com

StarTech.com MICATXPOW255 Manuel utilisateur

StarTech.com

StarTech.com ATXPOW450DF Manuel

StarTech.com

StarTech.com PS2POWER230 Manuel utilisateur

StarTech.com

StarTech.com Professional 430 Manuel utilisateur

StarTech.com

StarTech.com ATXPOW350SL Manuel

StarTech.com

StarTech.com ATX2PW400PRO Manuel utilisateur

StarTech.com

StarTech.com ATXPW500PRO2 Manuel utilisateur

StarTech.com

StarTech.com ATXPOW250PRO Manuel

StarTech.com

StarTech.com ATXPOWER300 Manuel utilisateur

StarTech.com

StarTech.com ATX12V2.2 Manuel utilisateur

StarTech.com

StarTech.com ATX2POW450HS Manuel utilisateur

StarTech.com

StarTech.com EPS12V Manuel utilisateur

StarTech.com

StarTech.com ATX2POWER400 Manuel utilisateur

StarTech.com

StarTech.com ATX2PW430WH Manuel utilisateur

StarTech.com

StarTech.com PS2POWER230 Manuel utilisateur

StarTech.com

StarTech.com ATXPOW300SL Manuel

StarTech.com

StarTech.com ATX2POWER350 Manuel utilisateur

StarTech.com

StarTech.com ATXPW350HPCQ Manuel utilisateur

Manuels Alimentation populaires d'autres marques

Monacor

Monacor PS-12CCD Manuel utilisateur

VOLTIMA

VOLTIMA MagicBox 15 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6032A Manuel utilisateur

Miller

Miller Auto Deltaweld 452 Manuel utilisateur

BCP

BCP PUOUBK Feuille d'instructions

HC 2210 Manuel utilisateur

Puls

Puls CT5.241 Manuel utilisateur

OCZ

OCZ ZX1250W Manuel utilisateur

iseg

iseg ECH 238 Manuel utilisateur

Power

Power XXL A Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 6631B Manuel utilisateur

Renogy

Renogy PHOENIX 300 Manuel utilisateur

HP 6200B Manuel de service

Epson

Epson Stylus Scan 2500 Manuel d'utilisation

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manuel utilisateur

Puls

Puls MiniLine ML50.100 Manuel utilisateur

Puls

Puls AS-Interface SLA4.100 Manuel utilisateur

Kenwood

Kenwood PS-60 Manuel utilisateur