StarTech.com PEX1000MMSC2 Manuel utilisateur
Manual Revision: 04/27/2022
User Manual
For the latest information and specications visit
www.startech.com/PEX1000MMSC2
PCI Express Gigabit Ethernet Multi Mode
SC Fiber Network Card
SKU#: PEX1000MMSC2
Actual product may vary from photos
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada. CAN ICES-3 (B)/NMB-3(B).
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:
(1) L’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil
doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
For the State of California
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related
in any way to StarTech.com. Where they occur these references are for
illustrative purposes only and do not represent an endorsement of a product
or service by StarTech.com, or an endorsement of the product(s) to which this
manual applies by the third-party company in question. Regardless of any
direct acknowledgement elsewhere in the body of this document, StarTech.
com hereby acknowledges that all trademarks, registered trademarks, service
marks, and other protected names and/or symbols contained in this manual
and related documents are the property of their respective holders.Safety
Statements
Safety Measures
• Wiring terminations should not be made with the product and/or electric
lines under power.
• Product installation and/or mounting should be completed by a certied
professional as per the local safety and building code guidelines.
• Cables (including power and charging cables) should be placed and routed
to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit
et/ou les câbles électriques sont sous tension.
• L’installation et/ou le montage du produit doit être réalisé par un
professionnel certié et dans le respect des normes locales et du code de
construction local.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent
être placés et acheminés de façon à éviter tout risque électrique, de chute ou
de sécurité
安全対策
• 電源が入っている状態の製品または電線の終端処理を行わないでくださ
い。
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に
従い、有資格の専門業者が行うようにしてください。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し
を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
にしてください。
Misure di sicurezza
• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le
linee elettriche sotto tensione.
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un
tecnico professionale certicato che conosca le linee guida locali sulle norme
edilizie e sulla sicurezza.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati
e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o
pericoli per la sicurezza.
Säkerhetsåtgärder
• Montering av kabelavslutningar får inte göras när produkten och/eller
elledningarna är strömförda.
• Installation och/eller montering får endast göras av behöriga yrkespersoner
och enligt gällande lokala förordningar för säkerhet och byggnormer.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så
sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.
Warning Statements
Make sure to assemble this product according to the
instructions. Failure to do so might result in personal injury or
property damage.
Never use this product if parts are missing or damaged.
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Safety Statements..................................................................................2
Warning Statements ..............................................................................3
Product Information ..............................................................................5
Packaging Contents ................................................................................................................................. 5
System Requirements.............................................................................................................................. 5
Product Diagram ....................................................................................6
Card................................................................................................................................................................ 6
Jumper.......................................................................................................................................................... 6
Installation ..............................................................................................7
Hardware Installation .............................................................................................................................. 7
Driver Installation...................................................................................................................................... 8
Software Utility ......................................................................................9
Connecting to a Network......................................................................10
Network Conguration ........................................................................................................................... 10
Card to Card Direct Conguration ...................................................................................................... 11
LEDs..........................................................................................................12
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Packaging Contents
• Port PCI Express Gigabit Fiber Network Card x 1
• Low Prole Bracket x 1
• Instruction Manual x 1
System Requirements
• Computer with an available PCI Express Slot (x1, x4, x8, or
x16)
6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Card
Jumper
Fiber Optic SC
Female
Activity LED
Link LED
JP2 Jumper
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installation
Hardware Installation
WARNING! PCI Express cards, like all computer equipment,
can be severely damaged by static electricity. Be sure that
you are properly grounded before opening your computer
case or touching your PCI Express card. StarTech.com recom-
mends that you wear an anti-static strap when installing any
computer component. If an anti-static strap is unavailable,
discharge yourself of any static electricity build-up by touch-
ing a large grounded metal surface (such as the computer
case) for several seconds. Also be careful to handle the PCI
Express card by its edges and not the gold connectors.
1. Turn your computer o and any peripherals connected to
the computer (i.e. Printers, external hard drives, etc.). Unplug
the power cable from the rear of the power supply on the
back of the computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. See
documentation for your computer system for details.
3. Locate an open PCI Express slot and remove the metal
cover plate on the rear of the computer case (Refer to
documentation for your computer system for details).
Note: This card will work in PCI Express slots of additional
lanes (i.e.x4, x8, or x16 slots).
4. Gently insert the card into the open PCI Express slot and
fasten the bracket to the rear of the case.
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note: If installing the card into a small form factor/low
prole system, replacing the pre-installed full prole bracket
with the included low prole installation bracket may be
necessary.
5. Place the cover back onto the computer case.
6. Insert the power cable into the socket on the power supply
and reconnect all other connectors removed in Step 1.
Driver Installation
Note: The card may auto-install using native drivers;
however, it is recommended to use the latest drivers version
provided on StarTech.com’s website.
1. Navigate to www.startech.com/PEX1000MMSC2
2. Click the Drivers & Downloads tab.
3. Under Driver(s), download the Driver corresponding to the
Operating System.
4. Extract the contents of the Driver Package.
5. Open the corresponding folder that matches the Operating
System Version.
6. For Windows and macOS systems, Execute the Installer
to nish installing the driver. For Linux systems, follow the
instructions on the accompanying README.txt le to nish
installing the driver.
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Software Utility
For Windows systems, the PCI Express Fiber Gigabit Ethernet
Adapter also includes an optional monitoring and maintenance
software utility that provides access to conguration settings,
testing, and reporting statistics.
To download the software, follow the instructions from the
Driver Installation section.
To install the software, follow these steps:
1. Navigate to the extracted Windows Drivers Folder from
the Driver Installation section.
2. Open the Diagnostic Tools folder.
3. Open the corresponding folder that matches the Operating
System Version.
4. Execute the setup.exe to nish the installation.
Ethernet Diagnostic Utility screen
Autres manuels pour PEX1000MMSC2
2
Table des matières
Autres manuels StarTech.com Carte PCI
StarTech.com
StarTech.com PCI1394MP Manuel utilisateur
StarTech.com
StarTech.com PCI1394 2LP Manuel
StarTech.com
StarTech.com 8STPEX2S1P553B Manuel utilisateur
StarTech.com
StarTech.com PCI2S1P2 Manuel utilisateur
StarTech.com
StarTech.com PEXUSB312C Manuel utilisateur
StarTech.com
StarTech.com PEXHDCAP2 Manuel utilisateur
StarTech.com
StarTech.com PCI1394B_3 Manuel utilisateur
StarTech.com
StarTech.com PEX1000SFP Manuel du système
StarTech.com
StarTech.com PEXSAT34RH Manuel utilisateur
StarTech.com
StarTech.com PEXSATA22I Manuel du système
StarTech.com
StarTech.com QUAD-M2-PCIE-CARD-B Manuel utilisateur
StarTech.com
StarTech.com CB1S485 Manuel utilisateur
StarTech.com
StarTech.com M2E4SFF8643 Manuel utilisateur
StarTech.com
StarTech.com PEXUSB3S3GE Manuel utilisateur
StarTech.com
StarTech.com PEXUSB311AC2 Manuel utilisateur
StarTech.com
StarTech.com ST1000SPEX Manuel utilisateur
StarTech.com
StarTech.com PCISOUND5CH Manuel utilisateur
StarTech.com
StarTech.com PCISCSIUW Manuel utilisateur
StarTech.com
StarTech.com PEXUSB311AC2 Manuel utilisateur
StarTech.com
StarTech.com PEX2S5521P Manuel utilisateur
Manuels Carte PCI populaires d'autres marques
Belkin
Belkin F5D7000F Manuel utilisateur
Pericom
Pericom PI7C7100 Manuel utilisateur
ADLINK Technology
ADLINK Technology cPCI-3548 Manuel utilisateur
Digium
Digium TE200 Series Manuel utilisateur
Allo.com
Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur
Western Digital
Western Digital FireWire PCI Adapter Manuel utilisateur