StarTech.com USB2VGA2 Manuel utilisateur

USB to VGA Adapter

USB2VGA2 Instruction Manual

Actual product may vary from photo

USB 2.0 to VGA Dual Display Adapter

FFCCCCCCoommpplliiaanncceeSSttaatteemmeenntt

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

UUsseeooffTTrraaddeemmaarrkkss,,RReeggiisstteerreeddTTrraaddeemmaarrkkss,,aannddootthheerrPPrrootteecctteeddNNaammeessaannddSSyymmbboollss

This manual may make reference to trademarks, registered trademarks, and other protected names

and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur

these references are for illustrative purposes only and do not represent an endorsement of a

product or service by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct acknowledgement

elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks,

registered trademarks, service marks, and other protected names and/or symbols contained in this

manual and related documents are the property of their respective holders.

Patent No.: US: US 7.203.788 / TW: I 229808 / JP: 3100747 / DE: 203 15 724.9 / CN:

ZL 02 2 92566.X / KR: 0405501

Instruction Manual

TTaabblleeooffCCoonntteennttss

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Configuring the Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Primary Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Extended Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Mirror Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

USB 2.0 to VGA Adapter Properties . . . . . . . . . . . . . . . . . . . . . . . . . .6

Virtually Repositioning Your Displays . . . . . . . . . . . . . . . . . . . . . . . . . .6

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Instruction Manual

Thank you for purchasing a USB 2.0 to VGA Dual Display Adapter. This adapter allows

you to connect any CRT monitor, LCD monitor, or projector to your PC or notebook,

making it the perfect solution for extending your desktop, or adding an extra display.

IInnttrroodduuccttiioonn

•Supports resolutions up to 1600 x 1200 (32-bit), 1920 x 1200 (16-bit)

Features

BBeeffoorreeyyoouubbeeggiinn

System requirements:

•Pentium 4 / Celeron family or AMD K6 / Athlon / Duron family with 1.5GHz or more

CPU Clock Speed

Package contents:

•USB 2.0 to VGA Dual Display Adapter (1)

This package should contain:

•Lightweight, portable design

•Simple, plug and play installation

•An available USB 2.0 port

•Two VGA compatible monitors/displays

•Instruction Manual (1)

•Drivers CD (1)

•256MB RAM or higher (1GB or higher recommended for playing DVDs)

•Windows 2000 SP4, Windows XP SP2 (32bit) and Windows Vista (32bit)

Instruction Manual

IInnssttaallllaattiioonn

1. Insert the Driver CD into your CD/DVD-ROM drive.

2. If the installation program does not begin automatically, locate the Setup.exe

application. This file will be located in the root directory of the Driver CD.

Note: Please ensure that driver installation is complete prior to the physical

installation of the USB 2.0 to VGA adapter.

Windows XP

4. At the screen that follows, you will be

instructed to ensure the USB2VGA

adapter is not connected to the

host computer. Once you have

read this information, please click on

Next.

3. Executing the Setup.exe application

will launch the following screen.

Please click on Next:

5. Once driver installation is complete,

you will reach the following screen.

Select Yes, I want to restart my

computer now, and click on

Finish.

Instruction Manual

6. Once your computer has completely restarted, you should notice the USB 2.0 to VGA

utility in the system tray as illustrated below. Software installation is now complete.

IInnssttaallllaattiioonn- Windows XP - Cont’d

7. Plug the power cord from the secondary monitor into a nearby power socket. Turn on

the secondary monitor.

8. Connect the VGA cord running from the secondary monitor to the adapter.

9. Plug the USB connection from the adapter into an available USB 2.0 port.

10. The secondary monitor should now be ready for use.

Windows Vista

1. Insert the Driver CD into your CD/DVD-ROM drive.

2. If the installation program does not begin automatically,

locate the Setup.exe application. This file will be located in

the root directory of the Drivers CD.

3. When the InstallShield Wizard

launches, click Next.

4. At the screen that follows, you will be

instructed to ensure the USB2VGA

adapter is not connected to the

host computer. Once you have

read this information, please click on

Next.

Instruction Manual

5. Please wait while Setup searches

for installed components.

6. Select Yes, I want to restart my

computer now and click Finish.

7. Once your computer has completely restarted, you should notice the USB 2.0 to VGA

utility in the system tray as illustrated below. Software installation is now complete.

8. Plug the power cord from the secondary monitor into a nearby power socket. Turn on

the secondary monitor.

9. Connect the VGA cord running from the secondary monitor to the adapter.

10.Plug the USB connection from the adapter into an available USB 2.0 port. Once the

adapter has been connected to the host computer, you will notice several message

balloons indicating driver installation status:

11. The secondary monitor should now be ready to use.

Instruction Manual

CCoonnffiigguurriinnggtthheeaaddaapptteerr

Once the driver and adapter have been installed, an icon will appear in the system tray

as shown below. This utility allows you to quickly change the settings and resolution for

your USB 2.0 VGA Adapter. The configuration menu can be accessed by right-clicking

on the icon:

Primary Mode

Selecting USB-VGA (Primary), will set the

secondary display adapter as the main display

adapter in the system. The system’s primary

adapter (and monitor) will automatically switch to

act as the extended desktop.

Please Note: Some display utilities and drivers that

ship with AGP and built-in display adapters will

prevent this option from working on some systems.

For the USB-VGA (Primary) setting to take effect,

you must first disable the original display utility

(typically located in the system tray).

Extended Mode

By default, your USB 2.0 VGA Adapter will extend

your Windows desktop functioning in USB-

VGA(Extended) .

You can change the relative position of this

extension under the Display Properties (Go to

Control Panel -> double click on Display and

select the Settings tab).

Mirror Mode

This setting will mirror the image from

your original desktop onto the secondary

desktop.

Instruction Manual

USB 2.0 to VGA Adapter Properties

1. To access the Display Properties for the USB 2.0 VGA Adapter, open the Control

Panel, and double-click on the Display icon.

2. Select the Settings tab.

3. Click on the Display drop-down menu, and select the USB 2.0 VGA DEVICE

(DISPLAY) as illustrated below:

4. From here, you can change the resolution and color depth as desired. Once the

desired changes have been made, click on OK to apply the settings.

Virtually Repositioning Your Displays

Click and drag the appropriate monitor icon (labelled 1 or 2) to the desired position. For

example, the secondary display can be dragged to the left of the primary display,

allowing it to be positioned virtually on the left. Click OK or Apply to save the changes.

Instruction Manual

TTrroouubblleesshhoooottiinngg

The USB 2.0 to VGA Adapter can’t be set as the primary display

Some video card manufacturers ship their product with a utility that prevents other video

cards from being set as the primary card. Please check the system tray for an icon

representing this utility, and if possible, please disable the utility prior to switching to the

USB 2.0 to VGA adapter as the primary display.

My DVD player will not work when I move the image to the extended display

Some DVD playback software does not support playing video on a second adapter of any

kind. Please refer to the documentation that was included with your DVD playback

software for further information.

Video will not display using Windows Media Player on the extended desktop

Please ensure that you have moved the Media Player window completely over to the

second screen.

There are horizontal lines covering the displayed image

This is due to a low refresh rate setting. You can change this in: Display Properties,

Settings, Advanced, Monitor. Make sure that you have selected the USB 2.0 VGA

Device first, and do not exceed the refresh rate limitations of the monitor. Resetting, or

resynchronizing the monitor may also help. For further details on how to reset or

resynchronize your monitor, please refer to the documentation that was included with

your monitor purchase.

I am unable to use applications that require Direct3D on the USB 2.0 VGA adapter

Currently, the drivers that support the USB 2.0 VGA adapter do not support Direct3D.

Please check for driver updates in the future, for added support. If your application

requires Direct3D, please use the main display adapter.

The following troubleshooting tips may help if you are experiencing any issues.

Check to make sure that all connectors are plugged in correctly.

- Make sure that the USB port that you are using is USB 2.0.

- Check to see that the monitor is connected correctly and the power is ON.

- Try connecting the adapter directly to the computer instead of through a hub.

- Make sure you restart your computer after the driver installation.

- Unplug the adapter and re-insert it.

- Check the website to make sure you have the latest drivers.

- Reset/refresh/resynchronize your monitor.

- If you have problems during the boot up process, start your computer in Safe Mode

Autres manuels pour USB2VGA2

Table des matières

Autres manuels StarTech.com Adaptateur

StarTech.com

StarTech.com DKT31CDHPD3 Manuel utilisateur

StarTech.com

StarTech.com ICUSB2321X Manuel utilisateur

StarTech.com

StarTech.com NOTECONS01 Manuel utilisateur

StarTech.com

StarTech.com 35S24M2NGFF Manuel utilisateur

StarTech.com

StarTech.com ICUSB2321F Manuel utilisateur

StarTech.com

StarTech.com US1GC30SFP Manuel utilisateur

StarTech.com

StarTech.com DKT30CSDHPD3 Manuel utilisateur

StarTech.com

StarTech.com ECUSB3S2 Manuel utilisateur

StarTech.com

StarTech.com SLMPT2VGA Manuel utilisateur

StarTech.com

StarTech.com COMP2VGATVGB Manuel

StarTech.com

StarTech.com ICUSB2321X Manuel utilisateur

StarTech.com

StarTech.com IP2DVI Manuel utilisateur

StarTech.com

StarTech.com USB32HDEH Manuel utilisateur

StarTech.com

StarTech.com MHD2VGA Manuel utilisateur

StarTech.com

StarTech.com DKT30CHPD Manuel utilisateur

StarTech.com

StarTech.com MHD2HDF11 Manuel utilisateur

StarTech.com

StarTech.com MSAT2SAT3 Manuel utilisateur

StarTech.com

StarTech.com 2CF2SATAR Manuel utilisateur

StarTech.com

StarTech.com HD2DPVGADVI Manuel utilisateur

StarTech.com

StarTech.com 8STICUSB232SM3 Manuel utilisateur

StarTech.com

StarTech.com USB2DVIE2 Manuel utilisateur

StarTech.com

StarTech.com USB2PS2 Manuel utilisateur

StarTech.com

StarTech.com 120B-USBC-MULTIPORT Manuel utilisateur

StarTech.com

StarTech.com GAME511WB Manuel

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur