Stardom SR2611 Series Manuel utilisateur

SOHORAID Series

Two Bays RAID 1 Internal Module

Manual

SR2611 Series

SOHORAID Series

w w w . s t a r d o m . c o m . t w

Your Data Security Guardian

SOHORAID Series

SR2611-2S-S1

Quick Installation Guide

Version:1.0

Check Package Contents and Accessories................................................. 2

System Requirement & Environment requirement and notices.................. 3

Hardware Installation Procedure................................................................. 4

Connecting SR2611 to your computer........................................................ 5

Setting the Hard Drive Array Mode.............................................................. 6

Computer Set Up........................................................................................ 7

Hard Disk status on LCD screen................................................................. 8

Appendix:Trouble Shooting/Q&A............................................................. 10

Index

1 Index

Please check above parts are included prior to installation. The accessories bag contains screws and a plastic key.

Status Indications of LEDs:

HDD Access LED will flash yellow when the data is accessed from the hard drive.

Fail LED will light red when HD failed, temperature is higher than 60 C or fan fails.

SATA

+5V +12V

GND FAN RS232

1 2

3 4

Front Panel Real Panel

eSATA Port Power Socket

5cm FanRS232 Port

153

3 4

LCD Panel HDD Tray

HDD Access LED

Fail LED

Key Lock

Mute Buttom

2Check Package Contents and Accessories

SR2611 system includes the following:

Item Quantity

SR2611 1

Removable Carrier 2

Internal RS232 cable 1

External RS232 cable 1

45cm SATA Cable 1

User’s Guide 1

RAIDGuide CD 1

Accessories bag 1

(includes 6#-32 screws x 8 pcs , Key for keylock x 2)

SR2611 Removable Carrier

Accessories bagRAIDGuide CD

Internal RS232 cable

User’s Guide45cm SATA cable

External RS232 cable

SATA

Check Package Contents and Accessories

Hardware Introduction

User’s Guide

3 System Requirement & Environment requirement and notices

System Requirement

Hardware Requirement

1. Computers or servers with SATAType 1.

2. Hard drive with SATAType 1/2 interface.

3. The computer or server must run on the Windows system and has RS232 port to install

the RAIDGuide GUI software.

Environment requirement and notices

1. SR2611’s brilliant design allows the user to simultaneously utilize two hard drives

manufactured by different companies. However, if the user expects better efficiency, we

strongly recommend the users to use hard drives manufactured by the same

manufacturers.

2. Since the system uses more stringent factors to determine the disk corruption in the hard

drive, please use noncorrupted hard drive with minimum storage capacity of 20 GB.

3. Please don’t set any MASTER or Single Drive mode for first and second hard drive in

SR2611, the system will detect the hard drives automatically.

4. The SR2611 had undergone strict hard drive compatibility test. The result shows that it is

compatible with most hard drives on the market such as Maxtor, Western Digital, Seagate,

Fujitsu, Hitachi, and etc. However, due to the new types of hard drives appearing on the

market, if your hard drive is not compatible with the system, please contact us at

www.stardom.com.tw or download the latest firmware updates.

5. The SR2611 is equipped with a 5.2 cm ball bearing cooling fan that will provide effective

cooling for the 7200 rpm hard drive. We highly recommend using computer chassis with

effective cooling design to avoid disk array crashing due to ineffective cooling.

6. SR2611 supports RAID 1 only.

Hardware Installation Procedure

1.Connect the SATA cables on the removable hard drive carrier to the pins of hard drive.

2. Secure the hard drive into the removable hard drive carrier by the screws which provided

in the accessory pack.

Hardware Installation Procedure

8 x 6#-32 screw

Real Panel

Internal Case

1. We do not recommend users to disassemble the machine without proper instructions and authorization. The

manufacture warranty will not cover damage caused by unauthorized disassembling.

2. If exchange the parts of SR2611 is absolutely necessary, please refer to the diagram in the user’s guide.

5Connecting SR2611 to your computer

1. Connect DC12V&4V power cables and SATA cables to SR2611.

2. Secure RS232 set on the SR2611 machine

3. Connect SR2611 to the motherboard COM 1 with RS232 cables which included in the

accessory pack as shown in the picture.

Connecting SR2611 to your computer

Internal RS232 Cable

SATA

+5V +12V

GND FAN RS232

45cm SATA Cable

Power Supply Connector

SATA

External RS232 Cable

SATA Ports

COM 1

COM 2

Power Supply SR2611

Motherboard

Internal RS232 Cable 3

45cm SATA Cable

Power Supply Connector

SATA

Setting the Hard Drive Array Mode

Installing two brand new hard drives

1. Place two new hard drives into SR2611 at the same time.

2. Use the disk monitoring software in the operating system to partition and format the hard

drive after turning the machine on. At this point, SR2611 will be treated as a single hard

drive. If hard drives with different storage capacity are installed, SR2611 will automatically

detect the storage capacity of each hard drive, and will treat the hard drive with larger

storage capacity as the same capacity of the hard drive with smaller storage capacity.

3. Install RAIDGuide (Windows User)

Installing a brand new hard drive and a hard drive with existing data

Internal RAID module is suggested to be used for OS backup data. We highly recommend

using the same brand of hard drives with the same or larger storage capacity when installing

hard drives to SR2611. The user can use the auto rebuilding function to automatically format

the new drive and subsequently to back up the data into the new hard drive.

1. Place the hard drive with existing data into slot 1 or 2 in the SR2611.

2. Since one of the slots is empty, the buzzer will alarm user about the empty slot when the

computer is turned on. To shut off the buzzer alarm, just push the bottom located in the

front display screen.

3. After turning on the operation system, please check whether the current SR2611 setting is

the same prior to hard drive installation. Then place the new hard drive in the removable

hard drive carrier into another slot. Note: the storage capacity of the newly installed hard

drive must be larger than or equal to the old hard drive.

4. The SR2611 will start the auto rebuilding function shortly after.

5. Please press the Buzzer bottom after auto rebuilding to reset the buzzer alarm and to

return the system operation normally.

6. If you use this install method and backup OS at the same time, please make sure that the

system is installed normally, in case of error or OS backup failure.

Setting the Hard Drive Array Mode

Computer Set Up

When the hardware setup for SR2611 is complete, you are now ready to turn the machine on.

1. After the hardware installation is complete, the SR2611 will be treated as one single hard

drive. Set the hard drive to AUTO in the computer’s BIOS. When the computer is turned on,

the system will retrieve the following information:

2. In SR2611, the installed hard drive can be detected by the Device Manager of Computer

Management for Windows

3. Customers can choose to format the hard drive by using the Disk Management tool of the

operating system before using the SR2611

At this point, the installation process is completely finished. The user can freely retrieve and

save data to SR2611 just like retrieving and saving data to a regular hard drive. If the user

experiences any abnormality during the operation, please refer to the trouble shooting Q&A

section in Appendix.

Computer Set Up

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Stardom Stockage

Stardom

Stardom SOHORAID DR5-WBS3 Manuel utilisateur

Stardom

Stardom SOHORAID DR2-TB2 Manuel utilisateur

Stardom

Stardom SR2-B31 Manuel utilisateur

Stardom

Stardom SOHORAID MR2-B31BP Series Manuel utilisateur

Stardom

Stardom ST5610-4S-WB Manuel utilisateur

Stardom

Stardom SOHORAID SR2 Manuel utilisateur

Stardom

Stardom SA2TB2 Manuel utilisateur

Stardom

Stardom itank i310 Manuel utilisateur

Stardom

Stardom SOHORAID ST2-TB3 Manuel utilisateur

Stardom

Stardom ZR3MS-B31 Manuel utilisateur

Stardom

Stardom itank i310 Manuel utilisateur

Stardom

Stardom sohoraid ST2-B31 Manuel utilisateur

Stardom

Stardom MR2-WBS2 Manuel utilisateur

Stardom

Stardom iTANK i310-BA31 Manuel utilisateur

Stardom

Stardom DR2-B31 Manuel utilisateur

Stardom

Stardom SOHORAID DR2-B31 Manuel utilisateur

Stardom

Stardom SOHOTANK US2-B32 Manuel utilisateur

Stardom

Stardom DR5-SB3 Manuel utilisateur

Stardom

Stardom SOHORAID ST4-TB3 Manuel utilisateur

Stardom

Stardom SOHORAID SR4-SB3 Manuel utilisateur

Stardom

Stardom SOHORAID SR4-SB3PLUS Manuel utilisateur

Stardom

Stardom SOHORAID DR8M-TB3 Manuel utilisateur

Stardom

Stardom SOHORAID DR3-B31 Manuel utilisateur

Stardom

Stardom SOHORAID SR4-B31A Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur