Printer Mechanisms
The printer mechanism comprises a 384-element, thin film head and a stepper motor-drive transport. Head
temperature compensation is utilized to provide constant print quality across a range of operating conditions.
Paper Out: The printer will automatically detect when the paper has run out. The paper signal will blink to
denote that the paper has run out.
Head Thermal Limit: After excessive printing, the paper head temperature may rise to an unusable level. If
this occurs, printing will be suspended until the temperature returns to normal levels.
Preparing the Scale for Use with Printer
1) Fix the weighing platform gently to the body of the scale via the four location points. The slope edge of the platform
should face the front part. (DO NOT press hard on the platform).
2) Plug the mains adapter supplied with the scale into the mains and connect the adapter's output plug to the input
socket at the rear side of the scale.
3) Unpack the printer.Plug the mains adapter supplied with the printer into the mains and connect the adapter’s
output plug to the input socket at the rear side of the scale. Connect the printer with the scale via the RS232 cable
supplied.
4) Connect end B of the supplied USB cable at the back of the scale. Connect end A of the cable to an available USB
port of the computer.
3) Placethescale on a firm and even surface. Press the "ON" key on the keyboard panel on the front side.
4) The display will show “uES2200” and "Scan Zero …"for a while. After this, scale will go to Weighing mode (lb
oz) by default. Now the scale is ready for weighing and counting. This is the normal mode of the scale.
5) Turn the printer ON. The ON/OFF switch of the printer is located at the front left side of the printer.
Operating the Scale
Weighing
Press the LB-OZ key to show the weight on the scale’s LCD. This is the normal weighing mode of the scale.This key
will toggle the weight between lb-oz and gram.
Counting
Press Sample to enter the sampling mode. Press up or down key to increment and decrement the sampling number
respectively by the step of 10. (Pressing the CE key in the sampling mode will exit to the counting mode). Once the
desired sampling number is chosen put the items on the scale and press Sample. The scale will memorize this
sampling number andstart counting the items.
Tare
Press the TARE key to set the weight to zero. This is useful for weighing an item with a container. Put the empty
container and press TARE. The scale weight display becomes zero. The items to weigh or count may now be placed
on the scale. Only the weight of the items (excluding the container) is displayed. “T” appears at the lower left corner of
the LCD when the scale is in Tare mode.
Line Feed
Press Line Feed key tofeed empty lines. This will cause the paper to move forward to the next line.
STAMPS.COM Support
Press this key to open thesupport webpage of Stamps.com website on the web browser.
Printing Mail Labels from the Computer to the Printer via the Scale
Labels can be printed from the computer to the printer using the application program that comes with this
product. To print mailing labels, follow these simple steps:
1. Make sure that the USB scale is connected to your computer and the thermal printer is connected to
the USB scale (see previous instructions for connections).
2. Turn the scale ON.
3. Turn the printer ON.
4. Run the application program.
5. Put the item to be mailed on the scale’s platform to capture the weight from the scale to the application
program (the Weight field will be automatically updated on the program).
6. Supply the other information in the following fields (all are required):
a. Barcode
b. Postal Number
