Stabila TECH 700 DA Manuel utilisateur

TECH 700 DA

How true pro’s measure

www.stabila.com

User manual

Contents

Section Page

• 1. Intended use 3

• 2. Components of the unit 3

• 3. Insert batteries/Battery replacement 4

• 4. Commissioning 4

• 5. Automatic switch-off time 4

• 6. Angle finder 5

• 7. Spirit level 5

• 8. Bevel gauge 5

• 9. Reference function 6

• 10. Lighting 7

• 11. HOLD function 7

• 12. Angle halving 8

• 13. Calibration of zero position 8

• 14. Technical Data 9

On/Off

Reference function

HOLD function

Angle halving

Lighting

The STABILA TECH 700 DA is an electronic angle

finder with digital display for quickly and easily

measuring angles.

Together with the vials, the angle finder can also

be used as a spirit level.

If you still have questions aer reading

through the operating instructions, you

can obtain advice by telephone:

+49 63 46 3 09 0

1.800.869.7460 U.S. and Canada

Equipment and functions:

• Electronics module with digital display for

accurately setting and measuring angles

• Vertical vial for vertical levelling

• Horizontal vial for horizontal levelling

1. 2 measuring surfaces

2. Vials - vertical and horizontal

3. Arm with 2 marking and cutting edges

4. LOCK system - to x the set angle

5. Keyboard

6. Display

7. Battery compartment lid

1. Intended use

2. Components of the unit

Unscrew battery compartment lid on front,

insert new batteries according to symbol in

battery compartment.

Suitable rechargeable batteries can also be used.

LCD:

low battery charge - insert new battery

Dispose of used batteries at suitable

collection points - not with household

waste. Do not leave in unit!

Remove the batteries if you do not

intend to use the unit for some time!

After switching on, the version number S x.xx of

the measuring program is briefly displayed.

The unit is switched off by briefly pressing

the "ON/OFF" button. The "OFF" confirmation

appears for 1 second.

If not used for long periods, the electronic angle

finder automatically switches off after 2 hours.

2x 1.5V alkaline

AA, LR6, Mignon

MN 1500

1Auto OFF

1 sec

3. Insert batteries / Battery replacement

5. Automatic switch-o time

4. Commissioning

0,5 mm/m

0,75mm/m

0,029°

0,043°

0°... 270°

The angle finder displays the angle currently set

between the arm and body. Angle measurements

can be taken between 0° and 270°.

The angle finder with 2 measuring surfaces is

also a fully functional spirit level for horizontal

and vertical measurements to level construction

elements. High-quality STABILA technology

makes the vials suitable for measurements:

(1) in the normal position

(2) in the reverse position

The LOCK system can be used to fix the arm at

the set angle.

8. Bevel gauge

7. Spirit level

6. Angle nder

The REF button can be used to select any set

angle as 0° reference. The angle details now

displayed relate to this reference angle.

The next time the arm is rotated, only the newly

set angle is displayed. The display flashes in this

setting. The REF symbol indicates this function

setting.

The original reference angle value is displayed

for 2 seconds by briefly pressing the REF button.

The reference angle is deleted by:

• pressing and holding (≥ 3 sec) the REF button

• switching off

• the automatic switch-off function

Positive and negative angles when adjusting

the arm:

angle greater than reference: positive

angle less than reference: negative

Only the negative sign is displayed

2 sec

3 sec

9. Reference function

The current measurement can be saved by

pressing the HOLD button. The measurement is

displayed continuously. In this setting, the display

flashes and the HOLD symbol is displayed.

This function can be used in combination with

the reference function.

The saved measurement is deleted by again

pressing the HOLD button or switching the unit off.

Repeatedly pressing the "Lighting" button

switches the display lighting on, to half

luminance or off.

11. HOLD function

10. Lighting

The current measurement is halved by pressing

the "Angle halving" button. The measurement is

displayed continuously. In this setting, the display

flashes and the "Angle halving" symbol is

displayed.

The value is deleted by again pressing the

"Angle halving" button or switching the unit off.

During use, instances may arise when the display

does not show 0.0° when the arm is swivelled all

the way in.

If this happens, rst check whether dirt is prevent-

ing the arm from closing fully. If the display is still

not showing 0.0°, the unit must be calibrated.

With the arm folded all the way in, the zero position

is calibrated by pressing and holding the ON/OFF

button. "CAL" is displayed for approx. 1 second.

Successful calibration is confirmed with "rdy".

The unit cannot be recalibrated if "Error" appears

on the display. The angle nder must be returned

for inspection.

3 sec

Display value ≠ 0.0°

13. Calibration of zero position

12. Angle halving

Accuracy of electronics module:

Angle measurement: ± 0.1°

Accuracy of spirit level:

in normal position: 0.5 mm / m = 0.029°

in reverse position: 0.75 mm / m = 0.043°

Measuring range: 0° - 270°

Batteries : 2 x 1.5 V alkaline, size Mignon, AA, LR6

Operating life : ≥ 150 hours

Operating temperature range: -10 °C to +50 °C / 14°F to 122°F

Storage temperature range: -20 °C to +65 °C / -4°F to 149°F

Protection class: IP 54

Subject to technical modifications.

14. Technical Data

www.stabila.com

USA

Canada

Europe

Middle and South America

Australia

Asia

Africa

STABILA Inc.

332 Industrial Drive

South Elgin , IL 60177

800-869-7460

[email protected]

STABILA Messgeräte

Gustav Ullrich GmbH

P.O. Box 13 40 / D-76851 Annweiler

Landauer Str. 45 / D-76855 Annweiler

+ 49 63 46 309 - 0

[email protected]

Table des matières

Autres manuels Stabila Instrument de mesure

Stabila

Stabila TECH 1000 DP Manuel utilisateur

Stabila

Stabila LAX 50 G Manuel utilisateur

Stabila

Stabila AWM Digital Manuel utilisateur

Stabila

Stabila LAR 300 Manuel utilisateur

Stabila

Stabila LAR-100 Manuel utilisateur

Stabila

Stabila LD 520 Manuel utilisateur

Stabila

Stabila LAX 200 Manuel utilisateur

Stabila

Stabila TECH 500 DP Manuel utilisateur

Stabila

Stabila TECH 196 Manuel utilisateur

Stabila

Stabila LAR 350 Manuel utilisateur

Stabila

Stabila TECH 196 DL Series Manuel utilisateur

Stabila

Stabila LD420 Manuel utilisateur

Stabila

Stabila TECH 106 T Manuel utilisateur

Stabila

Stabila LAR-200 Manuel utilisateur

Stabila

Stabila LAR 160 Manuel utilisateur

Stabila

Stabila LD 300 Manuel utilisateur

Stabila

Stabila REC 500 RG Manuel utilisateur

Stabila

Stabila LD 400 Manuel utilisateur

Stabila

Stabila LAX 600 Series Manuel utilisateur

Stabila

Stabila LAX 50 Manuel utilisateur

Stabila

Stabila Laser Distancer LD 320 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur