SpyCameraCCTV 1DIGLAN1003 Manuel utilisateur
1
2
Camera features
- IP65 rated
- Maximum wireless range: 100m (clear line of sight)
- 850nm infrared night vision LEDs - range up to 10m
- 9V, 600mA DC power supply for camera(s)
9” TFT LCD screen digital receiver features
- 800 x 480 pixel resolution
- Low power scan mode monitoring
- MicroSD card support. Maximum capacity supported: 64GB
- One LCD monitor can pair with up to four cameras
- Quad view display, up to 4 cameras simultaneously
- Maximum supported frame rates:
- 1 camera: 720p @ 15 fps
- 2 cameras: VGA @ 30 fps
- 4 cameras: VGA @ 15 fps
Recording modes:
- Manual
- Scheduled - per day of the week
- PIR motion detection
- Video motion detection
Alarm modes:
- PIR motion detection
- Video motion detection
- Individual recording les per camera
- 5 second pre-recording
- Two way audio - camera to screen / screen to camera
- Tour function
- Remote view and playback on Andoid and Apple iOS smart phones
- 5V, 2A DC power supply for LCD screen
FEATURE LIST
1DVRDIG1503
3
Feature List
1DVRDIG1503
This system includes the following components:
Wireless Monitor
Wireless Camera
Network Cable
AC Adaptor (9V) for camera
AC Adaptor (5V) for receiver
BOX CONTENT
1DVRDIG1503
4
Front Panel Buttons:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
LCD Screen
Talk Back
Motion Recording
Manual Recording
Change Channel
Quad/Sequence Mode
Zoom
Delete File
Menu
Joystick
Displays video from the camera(s) or
displays system operations
Activate/Deactivate motion recording
Enable two-way audio intercom.
Activate/Deactivate manual recording
Switch between paired cameras
Switch between Tour and Quad (up to
4-channels) viewing mode
Switch between 2x digital zoom and
normal viewing mode
Delete highlighted les in Playback
mode
Open main menu. Return to previous
menu
Move left / right / up / down to move
the cursor in menus.
WIRELESS RECEIVER
1DVRDIG1503
5
Back Controls:
1. Fold Up Wireless Antennas: Position the antennas as needed for best
reception.
2. Power Button: Press and hold to turn the receiver on /
o. Single press while the unit is powered on to enable scan mode.
3. Receiver Stand
4. Speaker
5. UID Number and QR Code: Unique ID number for conguration on
smartphone and tablet.
6. Ethernet Port (RJ45): Connect the receiver to your router using the
included Ethernet cable to enable smartphone / tablet connectivity.
7. Power Port: Connect to a local power outlet using the included power
adapter.
8. Volume Controls: Turn the receiver volume up and down.
9. MicroSD Card Slot: Insert up to a 64GB MicroSD card.
10. USB Port: Used for service purposes only.
11. Reset: Using a paper-clip or other thin object, push the reset button to
restore the system to its default settings.
12. Power Indicator LED: Glows when receiver is connected to power.
WIRELESS RECEIVER
1DVRDIG1503
6
Wireless Camera:
1. IR LEDs – Infrared LEDs provide viewing in no/low light conditions
2. Camera Lens –Catches the video in front of the lens and transmits video
from camera to receiver.
3. PIR Sensor – Detects motion in front of the lens and transmits detection
signal to the LCD receiver.
4. Speaker – Produces the sound transmitted via talk-back button being
pressed on the LCD receiver.
5. Camera Antenna – For bi-directional communication with the LCD
receiver.
6. Wall Mounting Bracket – Use the bracket to mount the camera on a wall
or other at surfaces.
7. AC Adaptor Jack – Plug the power adaptor to the jack for camera’s
power supply.
8. Pair Button – The pair button is located on the back of the camera, it is
used to pair the camera with receiver.
WIRELESS CAMERA
1DVRDIG1503
7
Camera Installation:
Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the camera to
the power adaptor.
Before starting permanent installation, verify its performance by observing
the image on the receiver when camera is positioned in the same
location/position where it will be permanently installed and the receiver is
placed in the location where it will be used most of the time.
Installation Warnings
Aim the camera(s) to best optimize the viewing area: Select a location for
the camera that provides a clear view of the area you want to monitor,
which is free from dust, and is not in line-of-sight to a strong light source or
direct sunlight.
Avoid installing the cameras where there are thick walls, or obstructions
between the Cameras and the Receiver.
Night Vision
This camera has built-in IR LEDs, which provides the camera with the ability
to view images in no/low light conditions.
WIRELESS CAMERA
1DVRDIG1503
8
Camera Installation:
Installing the Camera:
1. Carefully unpack the camera.
NOTE: If you are installing cameras that did not come with the system,
please see the pairing camera section of this manual for details on installa-
tion.
2. Mount the camera to the wall.
Mark the position of the screw holes on the wall, and drill holes and insert 3
screws, then rmly attach the camera to the wall. Make sure to strongly
secure the screw the mounting bracket into the wall
NOTE: The camera can also be placed on a at surface, such as a Table
or Shelf, and no mounting hardware is required.
3. Adjust the viewing angle of the camera. You can adjust camera angle to
desired viewing area.
NOTE: You can install additional cameras (maximum of 4 cameras).
When adding cameras that were not included in the original box, you
will need to pair up the cameras with the receiver. Refer to the camera
pairing section of this manual.
Connecting Camera Power:
The camera can be powered by using the provided power adaptor
Power Adaptor
Connect the power adaptor to the camera.
Make sure is the DC 9V for camera, and DC 5V for Receiver
Make sure the power adaptor is placed into a grounded outlet or surge bar
to protect the camera from power uctuations.
USING THE SYSTEM
1DVRDIG1503
9
Using the System:
By default, the camera(s) included with your system are automatically
paired to the receiver. The camera(s) and receiver will communicate with
each other once they are powered on. Note: it is recommended you power
on the cameras before powering on the receiver.
1.1 Understanding the On-screen Display
With camera 1 properly connected and powered on, the system displays a
full-screen live view of the camera.
With more than one camera properly connected and powered on, the
system displays up to 4 channels in split screen with the live view of each
camera. The gure below shows the display conguration for 2 cameras
connected.
USING THE SYSTEM
1DVRDIG1503
10
Using the System:
1. Signal Indicator –The signal indicator shows the strength of the signal
being received from the camera. The number of bars in the Signal Indicator
shows the strength of the signal. One, or no bars indicates the signal is poor,
and 4 bars indicate a very strong signal.
Note
• If the signal is low (e.g.,1 or 2 bars) adjust the antennas, or reposition the
cameras or receiver for best performance.
• The signal indicator does not shown while in Quad mode.
Signal Indicators:
USING THE SYSTEM
1DVRDIG1503
Table des matières
Autres manuels SpyCameraCCTV Système de sécurité
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur