Spotsee LOG-IC 360 Manuel utilisateur

LOG•IC®360 Data Logger Manual

Getting Started

SYSTEM REQUIREMENTS & SOFTWARE LOG-IC PDF LOGGER Windows or Mac-based operang systems

I-PLUG MANAGER Windows-based operang systems only

LOG-IC PDF Loggers are powered by Switrace I-Plug Technology. The Switrace I-Plug Manager is a free tool

that allows you to congure or modify the logger sengs.

Congure, Re-Congure (Mul-Use) or Modify Your Logger Sengs

Once your LOG-IC PDF logger is acve, do not plug into a USB port unless you want to stop the logger.

1. Download the FREE I-Plug Manager soware by vising hps://switrace.com/download/

2. Plug the LOG-IC data logger into any USB port

3. Congure or modify an unused Single-use or any Mul-use PDF logger. You can adjust these sengs:

a. Sample Time

b. Measures

c. Celsius or Fahrenheit

d. Start Delay

e. Alarms

4. Select Save Sengs

USER MANUAL

Using A Pre-Congured LED-Logger

Starng & Stopping the Logger

Starng the Logger

When you are ready to begin recording temperature with your logger:

1. Press and hold the START buon unl all 4 LED’s ash, releasing when the GREEN LED is acve

2. The GREEN LED will then begin ashing, verifying the logger is acve or in Start Delay.

Stopping the Logger

LOG-IC PDF loggers are programmed with a typical or customized trip duraon and will connue to record

unl the end of that duraon.

There are 2 dierent ways to stop the device before the end of a trip duraon:

1. Press and hold the STOP buon for 6 seconds unl all 4 LED’s ash,

releasing when the RED LED is acve and xed.

2. Plug the device into a USB port of a computer.

Reading the Logger

If you press the START buon at any me, LED indicators give valuable informaon about your temperature data:

Led Indicators:

• Ready State | 4 Blinking LED Indicators

Device has not been started.

NOTE: When the device is in this state, only the start buon is acve.

• Running State | Blinking Green

This conrms that the device is in Start Delay or acvely logging.

NOTE: There is a xed green LED indicator during the rst 2 minutes of recording.

• Stopped State | Fixed Red

This conrms that the device is no longer acvely logging

• Low Alarm Triggeered

Blinking Blue | In the Running or Stopped State, a blinking blue indicator idenes a low alarm has been triggered.

Fixed Blue | In the Running or Stopped State, a xed blue indicator shows an ultra-low alarm has been triggered.

• High Alarm Triggeered

Blinking Orange | In the Running or Stopped State, a blinking orange indicator idenes a high alarm has been triggered.

Fixed Orange | In the Running or Stopped State, a xed orange indicator idenes an ultra-high alarm has been triggered.

Rev: 12/2020

USER MANUAL

Connecting to the Device & Retrieving Data

Upon plugging in to any USB port, the LOG-IC PDF logger will be detected as a USB drive and will be recognized

without any addional soware.

Do not plug in the logger unless you are ready to stop the device.

There are 2 possible situaons when plugging in your device:

1. If the device was not previously logging, press the START buon for the computer to detect.

2. If the device is acve or was previously stopped, the computer will automacally detect the

logger and begin to generate the PDF report. Do not remove the logger during the download.

Once the report is ready a new USB Drive will appear on your PC, allowing you to download the PDF report.

Based on the conguraon of your logger, it could take up to 45 seconds for the PDF report be generated.

Reading the Temperature Data

A detailed graph will be provided once

the temperature data is downloaded.

Temperature informaon will be displayed

in red and temperature readings will

appear on the le side of the screen.

Reading the Temperature

and Humidity Data

A detailed graph will be provided once

the temperature and humidity data is

downloaded. Temperature informaon

will be displayed in red and temperature

reading will appear on the le side of the

screen. Humidity will be displayed in blue

and humidity readings will appear on the

le side of the screen.

ATI20-064 ATI SW LOG-IC 360 PDF Electronic Data Loggers Users Guide

americanthermal.com | 937.429.2114 | info@americanthermal.com

PDF ELECTRONIC DATA LOGGERS USERS GUIDE

Connecting to the Device

& Retrieving the Data

Upon plugging in to any USB port, the LOG-IC PDF

logger will be detected as a USB drive and will be

recognized without any additional soware. Do not

plug in the logger unless you are ready to stop the

device. There are 2 possible situations when plugging in

your device:

1. If the device was not previously logging, press the

START button for the computer to detect.

2. If the device is active or was previously stopped,

the computer will automatically detect the logger

and begin to generate the PDF report. Do not

remove the logger during the download.

Once the report is ready a new USB Drive will appear on

your PC, allowing you to download the PDF report.

Based on the configuration of your logger, it could take

up to 45 seconds for the PDF report the be generated.

READING THE TEMPERATURE DATA

A detailed graph will be provided once the temperature

data is downloaded. Temperature information will be

displayed in red and temperature readings will appear

on the le side of the screen.

READING THE TEMPERATURE

AND HUMIDITY DATA

A detailed graph will be provided once the

temperature and humidity data is downloaded.

Temperature information will be displayed in red

and temperature reading will appear on the le side of

the screen. Temperature humidity will be displayed in

blue and humidity readings will appear on the le side

of the screen.

(visual of the graph)

ATI20-064 ATI SW LOG-IC 360 PDF Electronic Data Loggers Users Guide

americanthermal.com | 937.429.2114 | info@americanthermal.com

PDF ELECTRONIC DATA LOGGERS USERS GUIDE

Connecting to the Device

& Retrieving the Data

Upon plugging in to any USB port, the LOG-IC PDF

logger will be detected as a USB drive and will be

recognized without any additional soware. Do not

plug in the logger unless you are ready to stop the

device. There are 2 possible situations when plugging in

your device:

1. If the device was not previously logging, press the

START button for the computer to detect.

2. If the device is active or was previously stopped,

the computer will automatically detect the logger

and begin to generate the PDF report. Do not

remove the logger during the download.

Once the report is ready a new USB Drive will appear on

your PC, allowing you to download the PDF report.

Based on the configuration of your logger, it could take

up to 45 seconds for the PDF report the be generated.

READING THE TEMPERATURE DATA

A detailed graph will be provided once the temperature

data is downloaded. Temperature information will be

displayed in red and temperature readings will appear

on the le side of the screen.

READING THE TEMPERATURE

AND HUMIDITY DATA

A detailed graph will be provided once the

temperature and humidity data is downloaded.

Temperature information will be displayed in red

and temperature reading will appear on the le side of

the screen. Temperature humidity will be displayed in

blue and humidity readings will appear on the le side

of the screen.

(visual of the graph)

Table des matières

Autres manuels Spotsee Enregistreur de données

Spotsee

Spotsee ShockLog Series Manuel utilisateur

Manuels Enregistreur de données populaires d'autres marques

TESTO

TESTO 176 Manuel utilisateur

HT Italia

HT Italia XL421 Manuel utilisateur

HBM

HBM SOMAT XR CX22B-R Manuel utilisateur

Agtrix

Agtrix 380i Manuel utilisateur

Hobo

Hobo H8 Pro Manuel utilisateur

Beijing ART Tech

Beijing ART Tech PCI2320 Manuel utilisateur

Athena

Athena GET SL1 Manuel utilisateur

Motec Systems

Motec Systems C185 Manuel utilisateur

Beijing ART Tech

Beijing ART Tech USB2832 Manuel utilisateur

Rotronic

Rotronic HygroLog HL20 Manuel utilisateur

MRC

MRC DW-6092 Manuel utilisateur

Racelogic

Racelogic VBOX LapTimer Manuel utilisateur

Edu-Logger

Edu-Logger 900-240 Manuel utilisateur

Elma

Elma DT173 Manuel utilisateur

MadgeTech

MadgeTech PRTemp140 Fiche technique

Comet

Comet U0121M Manuel utilisateur

pico Technology

pico Technology PT-104 Manuel utilisateur

Soil Instruments

Soil Instruments GTecLink Manuel utilisateur